Alloy Steel Stud Anchor Marine Ship Chain Mooring With CCS Certificate

Base Material Type:

Alloy steels used in marine environments typically utilize high-strength, seawater-resistant steels, such as certain high-strength low-alloy steels (AHSS/HSLA) or specific chromium-nickel-molybdenum alloy steels. Common grades include S355, S460, and even higher strength grades, depending on the load-bearing requirements and standard requirements.
Common Steel Grades and Material Standards (for reference when selecting materials):
Carbon Steel/Low-Alloy Steel: Common grades include high-strength steels in the AA, ASTM A/SA, and EN 10025 series.
Chromium-nickel-molybdenum alloy steels: Corrosion-resistant stainless steels such as 1.4404/316L are used in some structural sections, but high-strength carbon alloy steels are typically used for load-bearing components, with surface coatings used to enhance corrosion resistance.
High-strength low-alloy steels (HSLA): Examples include S355J2+N, S460N, and S690QL. Heat treatment and surface treatment are required to meet these requirements.

• Design and Heat Treatment:
  Heat treatment typically includes quenching and tempering (Q&T) to achieve the target yield strength (fy) and tensile strength (fu), while also controlling impact toughness to ensure fatigue life at the design temperature.
  Surface hardness targets and optional surface treatments such as carburizing/carbonitriding can enhance wear and pitting resistance.
  Protective Coatings and Corrosion Protection:
  Common coatings include galvanizing, epoxy coatings, polyethylene/polyurea topcoats, and powder coatings. Thickness is determined by the design environment (e.g., freshwater, seawater, or areas with acidic media).
  Cathodic protection may be required (e.g., incorporating a copper anode or external coating to reduce corrosion rates).

• Grade 80 Alloy Chains

  Grade 80 Alloy Lifting Chains Short Link Chain

  Grade 80 Alloy Lashing Chains Long Link Chain

  Grade 70 Transport Chain Galvanized.

  Transport Chain Grade 70 , Standard ASTM 80

  Transport Chain Grade 70 , Standard NACM84/90

  Transport Chain Grade 70 , Standard NACM 96

  All Kinds Of Chain Hooks, Grab Hooks, Slip Hooks, Hoist Hooks, Shank Hooks,Swivel Hooks

  Chain Fittings, Load Binder, Ratchet Type, Lever Type, Lashing Binder(lever Binder)

  Grade 43(40) High Test Chain

  High Test Chain, Grade 43(40), Standard ASTM 80

  High Test Chain, Grade 43(40), Standard NACM84/90

  High Test Chain, Grade 43(40), Standard NACM 96

  Grade 30 Proof Coil Chain

  Proof Coil Chain, Grade 30, Standard ASTM 80

  Proof Coil Chain, Grade 30, Standard NACM84/90

  Proof Coil Chain, Grade 30, Standard NACM 96

  Coil Chain And Machine Chain, NACM90

  NACM90 Coil Chain Twist Link

  Chains with clevise/eye grab hooks on both end

  DIN5685 A/C Short/long link chain

  DIN763 link chain

  DIN764 link chain

  DIN766 link chain

Technical drawings

Size Range for Diverse Applications

• Care and Maintenance Services
  Develop a regular maintenance plan (such as corrosion protection coating inspection, surface coating repair, and joint tightness verification).
  Provide a maintenance tool kit list, replacement part recommendations, and early repair plans for worn/corroded areas.
  Periodic health checks assess remaining life and replacement timing.