3' 4' 5' 6' g Sponge Polishing Pad For Car Paints

BT-6024 Sponge Polishing Pad black in fine grade
BT-6025 Sponge Polishing Pad orange in medium duty
BT-6026 Sponge Polishing Pad yellow in heavy grade duty
The size and thickness are the same. just in a different grade.
for 6 Inch 150mm Backing Plate Compound , Cutting Polishing Pad Kit
For Car Buffer Polisher Compounding , Polishing and Waxing

Car Polishing pads: Important Considerations
Size of Pad: Depending on the area being polished, the pad's diameter typically ranges from 3 to 8 inches.
Density of Pads: The foam's hardness influences how harsh the pad is. While lower density (soft) pads are used for finishing, higher density (firm) pads are more aggressive.

Attachment Method: Most pads are easily changed because they are fastened to polishers using hook-and-loop (Velcro) backing.
Of course! An outline of the requirements for cutting, polishing, and finishing pads may be found here. These specifications usually contain details like pad size, foam density, and intended purpose, though they can differ based on the brand and particular product line.

Cutting Pad Specifications:
- Diameter: 3 inches, 5 inches, 6 inches, 7 inches, and 8 inches
- Foam density is high (stiff).

- PPI (Pores Per Inch): 50-80 (a lower PPI allows for more aggressive cutting).
- Material: Coarse foam, microfiber, or wool.
- Thickness: 1 to 1.5 inches.
- Intended Use: Heavy defect elimination (deep scratches, oxidation, and swirl marks).
- Color: Cutting pads are typically colored in darker tones, such as yellow, orange, or blue.
- Surface Type: Flat, open-cell construction to improve airflow and heat dissipation.
- Cutting Ability: High cutting ability, with potential for micro-marring or haze.
 

Polishing Pad Specifications:
- Diameter: 3 inches, 5 inches, 6 inches, 7 inches, and 8 inches
- Foam density: Medium.
- Pores Per Inch (PPI): 60-80 (moderate PPI for balanced cutting and polishing)
- Material: medium to fine foam.
- Thickness: 1 to 1.5 inches.
- Intended Use: Refine the surface after cutting, light flaw removal.
- Color: Typically colored in lighter tones, such as white, green, or light blue.
- Surface Type: Flat or slightly concave for easier polish application.
- Cutting Ability: Moderate, suited to remove tiny scratches and improve gloss.
 

Finishing Pad Specifications:
- Diameter: 3 inches, 5 inches, 6 inches, 7 inches, and 8 inches
- Foam density: low (soft)
- PPI (Pores Per Inch): 70-100 (greater PPI for less cutting and smoother application).
- Material: ultra-soft foam.
- Thickness: 0.75 to 1.25 inches.
- Intended Use: Final polishing, applying waxes, sealants, or glazes
- Color: Typically in very pale hues (e.g., black, red, or gold).
To limit the likelihood of swirl marks, choose a flat or waffle surface.
- Cutting Ability: Low to non-abrasive; engineered to maximize gloss without removing material.