|
Cellular Interface
|
Antenna
|
2x SMA-K
Note: North America models: 2 x SMA 4G antenna connectors.
|
|
SIM card
|
1 x (3 V & 1.8 V) Standard 2FF SIM, drawer-type sim card slots
|
|
Ethernet
|
1 x WAN port, 10/100 Mbps, compliance with IEEE 802.3, supports auto MDI/MDIX,1.5KV network isolation transformer protection
|
|
4 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX,1.5KV network isolation transformer protection
|
|
Indicators
|
LED
|
PWR: red,always on after powered on
Work: green,blinking when the router is ready and working properly
WLAN: green,always solid on when WiFi is enabled and working properly
USR:user defined.
Net indicator:
Red always on after connected to 2G network
Green always on after connected to 3G network
Orange always on after connected to 4G network
Signal strength:3 solid bars,strongest signal
|
|
Terminal block
|
Pinout
|
V+,V- : 2 cores terminal power supply socket,built-in power supply phase-reversal protection
GND:groundterminal
Tx/B:RS-232/RS485pin(setupby software)
Rx/A:RS-232/RS485pin(setupby software)
DI:2 x Digital input,passive switch
DO:2 x Digital open collector output, max output 36 V, 300 mA
COM: common terminal,use in conjunction with DOs
|
|
WiFi Interface
|
Standards & Frequency
|
IEEE 802.11b/g/n,2.4GHz, AP mode
|
|
Data speed
|
IEEE 802.11b/g,maximum 54Mbps.IEEE 802.11n,maximum 150Mbps
|
|
Antenna
|
2x RP-SMA-K
|
|
Transmission distance
|
80 meters by line of sight.Actual transmission distance depends on environment of the site.
|
|
Power Supply
|
Adaptor
|
DC 12V/1A
|
|
Connector
|
DC Power Jack Barrel Type Female 5.5*2.1mm Round socket or industrial terminal block,reverse polarity protection
|
|
Input voltage
|
DC 9~36V
|
|
Working power
|
Average 522mA/12V, Maximum 811mA/12V
|
|
Serial Interface
|
RS485/RS232(alternative)
|
industrial terminal block.
Note:RS232 default.
|
|
Baud rate(bps)
|
1200,2400,4800,9600,19200,38400,57600,115200,230400
|
|
Data bits
|
8
|
|
Stop bits
|
1,2
|
|
Parity
|
NONE,ODD,EVEN
|
|
Physical Characteristics
|
Housing
|
Metal shell,IP30
|
|
Dimensions
|
125.0*103.0*45.0mm (L*W*H,antenna pedestal,terminal block and DIN Rail are not included)
|
|
Installation method
|
Ear mounting, DIN-Rail mounting
|
|
EMC
|
StaticIEC61000-4-2, level3
Pulsed Electric FieldIEC61000-4-4, level3
SurgeIEC61000-4-5, level3
|
|
Operating temperature
|
-20℃~+70℃
|
|
Storage temperature
|
-40℃~+125℃
|
|
Operating humidity
|
5%~95%RH(non-condensing)
|
|
Others
|
Reload
|
Pinhole button,restore factory defaults/firmware resume/firmware upgrading with USB
|
|
TBD
|
Debug interface (TTL Level)
|
|
USB
|
Firmware upgrading
|
|
TF
|
TF card slot
|
|
Ground protection
|
Screw
|
|
Embedded Watchdog
|
Device runs self-detection, auto recovers from malfunctions
|
|
