UL 94 Horizontal And Vertical Flame Tester For Foam Material Thin Film Materials

Compliance with International Standards

• The GD-UL94 Horizontal Vertical Flame Test Chamber complies with multiple international standards, including UL94, IEC 60695-11-10, ISO 1210, and GB/T 2408.
• It supports 50W vertical burning tests for classifications such as V-0, V-1, and V-2.
• The chamber is also capable of conducting thin film material vertical burning tests (VTM-0, VTM-1, VTM-2) as per ISO 9773.
• It meets the requirements for foam plastic combustion performance tests (HBF, HF-1, HF-2) as per GB/T 8332-2008.
• The tester is designed to perform horizontal and vertical combustion tests in accordance with GB/T 2408-2008.
• It supports 500W flame flow control systems for advanced testing needs.
• The chamber is suitable for testing inflammable performance, burning rate, flame spread, and fire retardant properties.
• It can be used for end-use test metrics to evaluate the combustion performance of materials.
• The device is designed to meet the requirements of IEC 60707 and ISO 9773:2001.
• It provides flexibility in testing by allowing users to switch between horizontal and vertical combustion test programs.

The GD-UL94 Horizontal Vertical Flame Test Chamber is ideal for testing the flammability of materials, with features such as a large observation window, corrosion-resistant interior, and 304 stainless steel clamps. The chamber's advanced control system includes a programmable controller with a 7-inch touch screen, allowing for easy setup and monitoring of tests. With precise flame height control and automated timing, the GD-UL94 ensures accurate and reliable results. Its user-friendly design and comprehensive compliance make it a valuable asset for any testing laboratory.

Main features:

Burner and gas control:

▪ The burner Angle can be easily adjusted at 0, 20, 45 degrees;

▪ Bunsen burner imported from the United States, barrel length 100mm±10mm, inner diameter 9.5mm±0.3mm; Fully comply with IEC 60695-11-4 burner requirements;

▪The blowtorch itself can be adjusted for flow; The blowtorch itself can adjust the air intake;

Cabinet and fixture features

▪ Large test box 0.75m3, to ensure that the test has sufficient air supply;

▪ Box baking paint treatment, internal baking black paint (standard requirements) corrosion resistance;

Control system:

▪ Programmable controller 7" touch screen to realize control/detection/calculation/data display;

▪ Pulse high voltage electronic automatic ignition.

▪Timing button with PLC to automatically record and store the burning time.

▪ Test Level values (HB0 HB40 HB75/V-0 V-1 V-2) and national standard values can be viewed on the screen.

▪ Horizontal and vertical combustion test procedures can be switched on the touch screen.

HBF, HF-1, or HF-2 test part:

▪ Double burner station setting: the Bunsen burner imported from the United States complies with ISO10093:1998. Barrel length 100±10mm, inner diameter 9.5±0.3mm. Precise control of blue flame height 25~35mm; Horizontal combustion with wing top nozzle, 400mm high;

▪ Programmable controller PLC+ touch screen to achieve control/detection/calculation/data display.

Specification: