1.54 Inch Square IPS TFT LCD Screen with 240x240 Resolution and SPI Interface
Price:
0.7-7USD
MOQ:
1000
Delivery Time:
3-4WEEKS
Brand:
BBI
Product Description
IPS TFT LCD 1.54 Inch Square Display 240*240 Dots Resolution SPI Interface
Product Overview
This 1.54-inch square IPS TFT LCD display features 240*240 resolution with SPI interface, offering excellent color performance and wide viewing angles for embedded applications.
Technical Specifications
| Item | Specification | Unit |
|---|---|---|
| Display Mode | Normally Black, Transmissive | / |
| Viewing Direction | ALL | / |
| Colors | 262K | / |
| Drive IC | ST7789 | / |
| Interface Type | 4 Wire SPI | / |
| Dimensional Outline | 31.52(W) x 33.72(H) x 1.94(T) | mm |
| LCD Active Area | 27.72(W) x 27.72(H) | mm |
| Resolution | 240 RGB(H) x 240(V) | pixels |
| Pixel Pitch | 0.1155(W) x 0.1155(H) | mm |
Mechanical Drawing
Pin Definition
| Pin.No | Symbol | Description |
|---|---|---|
| 1 | GND | Ground |
| 2 | D/C | Register select pin D/C='1': Display data. D/C='0': Command data. |
| 3 | CS | Chip select pin("Low" enable) |
| 4 | SCL | Serial clock pin |
| 5 | SDA | Serial data input / output |
| 6 | RESET | LCM Reset pin |
| 7 | VCC | Power supply for Analog(2.8V-3.3V) |
| 8 | GND | Ground |
| 9 | LEDA | Anode of Backlight |
| 10 | LEDK | Cathode of Backlight |
Product Features
- IPS technology provides wide viewing angles up to 80° in all directions
- 262K color support with bright, vivid display quality
- ST7789 drive IC with 4-wire SPI interface
- 240*240 pixel resolution with 220 PPI density
- Compact square form factor: 27.72*27.72mm active area
- 3.3V operating voltage with backlight brightness control
- Wide operating temperature range: -20°C to 70°C
- Compatible with Arduino, ESP32, STM32, and Raspberry Pi
Typical Applications
- Maker projects and open-source hardware visual panels
- Wearable devices: smart watches, fitness trackers
- Industrial instruments and medical equipment displays
- Smart home and IoT terminal status screens
- Consumer electronic auxiliary displays
Product Images
Frequently Asked Questions
I want the LCD display 8 digits and the outline size is 65x30x2.8mm. Is this possible?
Yes, we can accommodate custom specifications. Please provide your detailed specification document or drawing. If you don't have specifications, you can send samples and we'll recommend suitable products or create custom solutions based on your requirements.
This LCD is what we want, but it's too big. Do you have smaller sizes?
For segment type LCD modules requiring size or display content modifications, we can create new LCD glass modules with custom tooling to meet your specific requirements.
This LCD display is HTN type, but I want STN type. Can you make it?
Yes, we can modify the display type according to your specifications and requirements.
Can you customize a new LCD module for us?
Absolutely. Please provide your drawing specifications. If you don't have drawings, please specify the outline size, display information (glass thickness, polarizer, display type, connector mode, temperature ranges, supply voltage, viewing direction, drive conditions), and we'll create a custom solution.
What is the lead time for tooling?
Typically 15 to 25 days after drawing confirmation and tooling charge payment. We'll provide exact timelines once your drawing specifications are confirmed.
Can you send samples for evaluation?
Yes, sample orders are available for quality checking and testing.
What is the production lead time?
For standard products in stock, lead time is one day after payment. For mass production of special orders, lead time is approximately 15-30 days. We'll notify you immediately if we can complete production earlier.
Product Demonstration
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Dongguan Bibuke Electronic Technology Co., Ltd.
Location
Shangyu Commercial Centre Chang'an, Dongguan, Guangdong, China 523881
Contact Person
Jack