2.00MM Pitch PHB Connector Double Row Type HCTL HC-PHB-2*9EY-05 Suitable for Electrical Applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification covers the 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE, designed for electrical applications requiring reliable connections. It details product performance, test methods, and inspection requirements, ensuring interchangeability with same specification products.

Product Attributes

Brand: HCTLDZ ()
Origin: Shenzhen, China
Certifications: UL94V-O (for Housing Plastic and Plastic Wafer)
Color: Nature (for Housing Plastic and Plastic Wafer)

Technical Specifications

Item	Requirement	Test Mode
4. Appearance and Dimension
Appearance	Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling.	General Principles
Dimension	According to drawings	General Principles
Exchangeable	Exchangeable with same specification products.	General Principles
3. Use Condition
Ambient Temperature	-25 +85	General Principles
Applicable Wire Sizes	AWG #22#28	General Principles
Applicable PC board thickness	1.6mm	General Principles
5. Material
Terminal Contact	Brass, 0.50mm thickness, Tin plating: 2.55m	N/A
Housing Plastic	Nylon66, UL94V-O, Color: Nature	N/A
Plastic Wafer	Nylon66, UL94V-O, Color: Nature	N/A
Contact Pin	Phosphor bronze, 0.2mm thickness, Tin plating: 35m	N/A
6. Electrical Performance
Rated Voltage	250V AC/DC	Test Mode
Rated Current	2A AC/DC	Test Mode
Withstand Voltage	No breakdown or flashover	Apply 800V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors
Contact Resistance	Initial value 20m	A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector (Does not include wire resistance)
Insulation Resistance	1000 M	Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance
7. Mechanical Performance
Terminal crimping Wire strength	50N (AWG#22), 30N (AWG#24), 20N (AWG#26), 13N (AWG#28)	Axial pullout force per contact at a rate of 253mm per minute
Fixed terminals And hole seat	12N	Pullout force of terminal from hole seat at a rate of 253mm per minute along the wire direction
Single contact insertion force	5N	Inserting force test at a rate of 253mm per minute
Seat pull-out force	15N	Force applied to the pin end at a rate of 253mm per minute until the needle exits the seat
Pin Retention Force	N/A	N/A
Durability	Contact Resistance 40m; Appearance: No damage	Mate connectors up 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test
Vibration	Current Interruption: 1 sec Max; Contact Resistance 40m; Appearance: No damage	Amplitude: 1.5mm p-p; Frequency: 10-55-10Hz/minute; Period: 2 hours for each direction (X, Y, Z axis)
8. Endurance Characteristics
Thermal Aging	Contact Resistance 40m; Appearance: No damage	Temperature: 852; Period: 96 hours continuously
Temperature Rise	N/A	Measure the temperature rise of contact when the maximum rated current is passed
Humidity	Contact Resistance 40m; Insulation Resistance 1000m; Appearance: No damage	Temperature: 402; Relative humidity: 90-95% (RH); Period: 96 hours continuously
Temperature Cycling	Contact Resistance 40m; Insulation Resistance 1000m; Withstand Voltage: No breakdown or flashover; Appearance: No damage	One cycle: -553C (30min) -> room temp (10-15min) -> 853C (30min) -> room temp (10-15min); Total cycles: 5
Salt Spray	Contact Resistance 40m; Appearance: No damage	Temperature: 353; Concentration: 51%; Period: Stamping before tin plated for 24 hours OR Stamping after tin plated for 8 hours
Solder Ability	Soldering Area: 90 %	Solder temperature: 2455C; Immersion period: 3 0.5S
Resistance to soldering heat	Appearance: No damage	Manual soldering: Soldering temperature: 350 5; Soldering time: 3 0.5S (Position 1.5mm from end of conductor or fixed piece) Wave soldering: Soldering temperature: 260 5C; Soldering time: 5 0.5S