Connector HRS DF62C-4S-2.2C designed for high voltage proof and mechanical operation in AC DC electrical systems

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This product is a connector designed for AC/DC voltage applications up to 250V. It offers various current ratings based on wire gauge (AWG), supporting AWG 22 at 3A/pin, AWG 24 at 2A/pin, and AWG 26-30 at 1A/pin. The connector is built to withstand a wide operating temperature range from -35C to +105C and is suitable for applications requiring robust electrical and mechanical characteristics.

Product Attributes

Brand: HIROSE ELECTRIC CO., LTD.
Applicable Connector: DF62B-4EP-2.2C(##)
Applicable Contact: DF62-22SC*, DF62-2428SC*, DF62-30SC*
Certifications: UL, C-UL
Standards: JIS C 5402 (unless otherwise specified)

Technical Specifications

ITEM	TEST METHOD	REQUIREMENTS	QT	AT
CONSTRUCTION GENERAL EXAMINATION	VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING.		X	X
MARKING	CONFIRMED VISUALLY.		X	X
INSULATION RESISTANCE	500 V DC.	1000 M MIN.	X	-
VOLTAGE PROOF	650 V AC FOR 1 min.	NO FLASHOVER OR BREAKDOWN.	X	-
MECHANICAL OPERATION	30 TIMES INSERTION AND EXTRACTION.	NO DAMAGE, CRACK OR LOOSENESS OF PARTS.	X	-
VIBRATION	FREQUENCY 10 TO 55 Hz, SINGLE AMPLITUDE 0.75 mm, AT 10 CYCLES FOR 3 DIRECTION.	NO DAMAGE, CRACK OR LOOSENESS OF PARTS.	X	-
SHOCK	490 m/s DURATION OF PULSE 11 ms AT 3 TIMES EACH FOR 3 BOTH AXIAL DIRECTIONS.	NO DAMAGE, CRACK OR LOOSENESS OF PARTS.	X	-
DAMP HEAT (STEADY STATE)	EXPOSED AT 40 2 , 90 TO 95 %, 96 h. (AFTER LEAVING THE ROOM TEMPERATURE FOR 12h.)	INSULATION RESISTANCE: 1000 M MIN. NO DAMAGE, CRACK OR LOOSENESS OF PARTS.	X	-
RAPID CHANGE OF TEMPERATURE	TEMPERATURE -55 +85 TIME 30min 30min UNDER 5 CYCLES. (THE TRANSFERRING TIME OF THE TANK IS 23 min) (AFTER LEAVING THE ROOM TEMPERATURE FOR 12h.)	INSULATION RESISTANCE: 1000 M MIN. NO DAMAGE, CRACK OR LOOSENESS OF PARTS.	X	-

Operating Conditions

Parameter	Range	Notes
OPERATING TEMPERATURE	-35 C TO +105C	NOTE1: INCLUDE THE TEMPERATURE RISING BY CURRENT.
STORAGE TEMPERATURE	-10 C TO +60C	NOTE3: APPLY TO THE CONDITION OF LONG TERM STORAGE FOR UNUSED PRODUCTS BEFOR PCB ON BOARD, AFTER PCB ON BOARD, OPERATING TEMPERATURE AND HUMIDITTY RANGE IS APPLIED FOR INTERIM STRAGE DURING TRANSPORTATION.
OPERATING HUMIDITY	20% TO 80%	NOTE2: NO CONDENSING
STORAGE HUMIDITY	40% TO 70%	NOTE3: APPLY TO THE CONDITION OF LONG TERM STORAGE FOR UNUSED PRODUCTS BEFOR PCB ON BOARD, AFTER PCB ON BOARD, OPERATING TEMPERATURE AND HUMIDITTY RANGE IS APPLIED FOR INTERIM STRAGE DURING TRANSPORTATION.