IEC60811-3-1 High Temperature Indentation Device Equipped With 30 PCS Weights
|
IEC60811-3-1 High Temperature Indentation Device Equipped With 30 PCS Weights IEC 60811-3-1 clause 8.2.3 Position of the test piece in the test apparatus The indentation device shall be the same as specified in Sub-clause 8.1.3 and shown in Figure 1. The ......
Guangzhou HongCe Equipment Co., Ltd.
|
Figure 1 120 ° High Temperature Indentation Device IEC 60811-508
|
... Technical Parameters: Item Parameters Model SN2141A Standard IEC 60811-508 Figure 1, IEC 60811-3-1 Figure 1 and etc. Weights 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000g, each of 3 pieces, totally are 30 pieces Station 3 stations Depth of cut 0.7±0.......
Sinuo Testing Equipment Co. , Limited
|
HDX1310 High Temperature Indentation Device IEC Test Equipment
|
IEC Test Equipment High Temperature Indentation Device For wire and cable products Standard: IEC60884-1-2002 ‘Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements’ clause 30.1 IEC60598-2-20 ‘Luminaires -Part 2-20:......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
High Temperature Indentation Device
|
Product details: Conforming to many standard requirements, this testing apparatus is used to test the heat resistance of the insulation material. It has a rectangular blade (see figure 41a) with an edge 0,7 mm wide, to be used in the case of round pins, or......
HK LEE HING INDUSTRY CO., LIMITED
|
Two Stations Cable Testing Machine High Temperature Indentation HDX1310
|
... support 4,The load weight is composed of a rectangular knife + weight +tray), rectangular knife and tray are 120g, and equip with two sets of a standard weight of 1~1kg. Standard:IEC60884-1-2002 clause 30.1 figure 41,IEC60598- 2-20 clause 20.15, EN60811-3...
shanghai kerang technology co ltd
|
Indentation Device Safety Test Equipment IEC60811 SUS304 For Insulation Sheaths
|
...Indentation Device for Testing Cable Insulation Sheaths 1. Introduction The indentation device is designed according to IEC60811-508:2012 figure 1, the device is consisted by blade, supporting mandrel and loads.It is applied to test the indentation produced by the insulation sheath of the plug or cable under high temperature and pressure, the device......
Pego Electronics (Yi Chun) Company Limited
|
Li-SOCl2 High Temperature Battery For Diesel Cylinder Inspection Devices
|
...High Temperature Battery For Diesel Cylinder Inspection Devices International Standard 1/2AA Nominal Capacity(mAh) 700 Max Size(mm) Φ14.5×25.0 Standard Discharge Current(mA) / Weight(g) 10 Max Continuous Current(mA) 10 Nominal Voltage(V) 3.6 Max Pulse Current(mA) 50 1. Battery Characteristic High and Stable Voltage Single cell rated voltage 3.6V, load voltage 3.4~3.6V in high temperature Flat discharge curve Wide Operating Temperature...
HCB Battery Co., Ltd
|
Short 8" Black Synthetic Hair Extensions Highlight With High Temperature Fiber
|
...High Temperature Fiber Description: Material High Temperature fiber Color Natural colors: 1#,1B,2#,4#,30#,33#... Light color: 27#,613#,144#... Bright color: RED,118#,T1557,T2608,T0953… Color can be customized Lenght 8inch Weight 100g/pack Packing Packaging cardboard inside ,PVC bag outside Or be OEM Minimum Order 30pcs......
Guangzhou HuanFei Trade Limited Liability Company
|
Shell High Temperature Self-Weight Deformation Testing Device
|
... of High Temperature Self-Weight Deformation". The electric furnace part uses mullite fiber furnace chamber material instead of the traditional furnace body refractory ......
DONGGUAN LONROY EQUIPMENT CO LTD
|
High Temperature 3.6V Primary Li Socl2 Battery ER14335 2/3AA Size ER14335S For Tracking TPMS Product
|
...: Title: high temperature li-socl2 battery ER14335S IEC: 2/3AA size Nominal Voltage: 3.6 Volt Max.Dimension: 14.5×33.2mm Weight: 14g Standard Current: 50 mA Continuous Discharge Current: 150 mA Operating Temperature(c): -20~+150 °C Terminate Voltage:...
Guangzhou Serui Battery Technology Co,.Ltd
|