Low Voltage 20V/1A/20W Keithley 2401 Sourcemeter Keithley Source Measure Unit
![]() |
...Source Measure Unit Description of Keithley 2401 Keithley’s Standard Series 2400 Source Measure Unit (SMU) Instruments offer four-quadrant precision voltage and current source/load coupled with measurement. Each SMU instrument is both a highly stable DC power source and a true instrument-grade 6½-digit multimeter. The power source......
Shenzhen Meigaolan Electronic Instrument Co. Ltd
|
IMU50 MEMS Low-Cost High-Precision Inertial Measurement Unit IMU RS232/RS485/TTL
![]() |
... of the moving carrier. It is suitable for inertial attitude measurement in motion or vibration state. It adopts MEMS accelerometers and gyroscopes with high reliability, and the error source is greatly eliminated through nonlinear compensation,...
Wuxi Bewis Sensing Technology LLC
|
Built In MEMS Gyroscope IMU Inertial Measurement Unit Based On MEMS
![]() |
...Measurement Unit (IMU) Based On Micromachining Technology (MEMS) The IMU200B-IMU is an inertial measurement unit (IMU) based on micromachining technology (MEMS) with built-in high-performance MEMS gyroscope and MEMS accelerometer, which outputs 3 angular velocities and 3 accelerations. Product features Three-axis digital gyroscope: ± 500º/s dynamic measuring......
Shenzhen Fire Power Control Technology Co., LTD
|
LSM6DS3TR Sensor IC 1.25mA 6-Axis iNEMO Inertial Measurement Unit LGA-14L Package
![]() |
...Measurement Unit LGA-14L Package Product Description Of LSM6DS3TR LSM6DS3TR is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope performing at 1.25 mA (up to 1.6 kHz ODR) in high performance mode and enabling always-on low-power features for an optimal motion experience for the consumer. LSM6DS3TR supports main OS......
ShenZhen Mingjiada Electronics Co.,Ltd.
|
Inertial Navigation Grade Electronic Gyroscopes Used In Measurement Units And Systems
![]() |
Inertial Navigation Grade Electronic Gyroscopes Used In Measurement Units And Systems This product is an inertial angle rate sensor based on the optical Sagnac effect for measuring the rotational angular velocity of the carrier along the sensitive axis......
Xi'an Kacise Optronics Co.,Ltd.
|
Packing Material Haze Measurement Unit 110 - 240V Power 10nm Wavelength Interval
![]() |
Packing Material Plastic Film Transparency Meter for Haze and Transmittance Transparency Meter Technical Data Type Haze Meter CS-700 Light Source CIE-A,CIE-C,CIE-D65 Standards ASTM D1003/D1044,ISO13468/ISO14782 Parameters HAZE,Transmittance(T) Spectral ......
CHNSpec Technology (Zhejiang)Co.,Ltd
|
ICM-20648 I2C SPI IMU Inertial Measurement Unit TDK InvenSense
![]() |
...20648 ELECTRONIC INTEGRATED CIRCUITS IMU-Inertial Measurement Unit DMP-Enabled 6-Axis Integrated Solution for 1.APPLICATIONS •Wearable Devices •Smartphones and Tablets •IoT Applications •Motion-based game controllers •3D remote controls for ......
Shenzhen Hongxinwei Technology Co., Ltd
|
NHG60M Digital Gloss Meter Gloss Measurement Units Connected To PC With Small Aperture
![]() |
...Measurement Units Connected To PC With Small Aperture Description NHG60M Digital Gloss Meter adopts small aperture 1.5*2mm, with 60° angle, manufactured according to ISO2813 and GB/T 9754. It is also compatible with the standards of ASTM D523, ASTM D2457. NHG60 conforms to JJG696 first class gloss meter working requirement, corresponding with CIE 1931(2°) under CIE C light source......
Shenzhen ThreeNH Technology Co., Ltd.
|
1HV - 4000HV Digital LCD Screen Automatic Hardness Tester 0.25μm Minimum Measuring unit, diamond vicker hardness
![]() |
Thermal Printer Glossy And Graceful Exterior Micro Vickers Hardness Testing Machine Specification: 1. The optical system designed by our senior optical engineer not only meet the definition of hardness testing requirements, but also can observe the micro ......
Dongguan Liyi Environmental Technology Co., Ltd.
|
NHG268 Micro Tri Gloss Meter , 2000gu Gloss Measurement Units Connect To PC
![]() |
NHG268 Tri-Angle Intelligent Gloss Meter 2000gu with GQC6 Glossy Quality Control Software Brief Introduction: NHG268 gloss meter features with 20, 60 and 85° angle, manufactured according to ISO2813 and GB/T 9754. It is also compatible with the standards......
Shenzhen ThreeNH Technology Co., Ltd.
|