Decanter Centrifuge

Decanter Centrifuge for MBR Sludge Treatment Description The Decanter Centrifuge for MBR Sludge Treatment is designed for efficient solid-liquid separation of membrane bioreactor sludge generated from advanced wastewater treatment systems. It provides continuous sludge dewatering by separating concentrated biological solids from water, helping reduce sludge volume, improve sludge handling efficiency, and support downstream treatment such as drying, disposal, or resource

Decanter Centrifuge for Talc Slurry Recovery Description The Decanter Centrifuge for Talc Slurry Recovery is designed for continuous solid-liquid separation, talc powder recovery, slurry thickening, and process-water clarification. It is suitable for talc powder processing, talc washing, grinding slurry, classification overflow, mineral beneficiation wastewater, and fine talc recovery from process water. The centrifuge separates talc solids, fine mineral particles, clay, and

Decanter Centrifuge for Pigment Slurry Dewatering Description The Decanter Centrifuge for Pigment Slurry Dewatering is designed for continuous pigment recovery, slurry thickening, wash-water clarification, and filter-press feed preparation. It is suitable for titanium dioxide, iron oxide, carbon black, inorganic pigments, mineral pigments, and compatible organic pigment slurries. Typical Applications Titanium dioxide slurry thickening Iron oxide pigment dewatering Carbon

Decanter Centrifuge for Feldspar Slurry Dewatering Description The Decanter Centrifuge for Feldspar Slurry Dewatering is designed for continuous slurry thickening, feldspar fines recovery, filter-feed preparation, and process-water clarification. It can be installed after feldspar washing, grinding, desliming, classification, flotation, or tailings treatment. Feldspar ores commonly contain quartz, mica, clay, kaolin, and iron-bearing impurities, so the centrifuge configuratio

PDC Titanium Decanter Separator Centrifuge For calium hypochlorate Brief Introduction PDC Titanium Decanter Separator Centrifuge For calium hypochlorate is a horizontal, continuously working and continuously spiral discharging sedimentation centrifuge. It is used in a variety or industries for separating all kinds of solid liquid suspension, defecating liquid phase with graded grains, and dehydrating sludge such as: polyoxyethylene, sulfurous acid tansuanbei, strontium

Applications When developing the range of PDC three-phase decanters for processing crude palm oil Peony focused on efficient, reliable separation of liquid, dry solids (cake) and oil for maximum oil recovery with minimum oil losses. The PDC range includes decanters suitable for every size of oil mill, from 30 to approximately 90 tons of fresh fruit bunches (FFB) per hour, and for a variety of crude palm oil applications including: • Combined clarification and purification of

olid Liquid Separation Drilling Separator - Centrifuge For Manure Sluge Competitive Advantages automatic continuous operation Water level adjustable Highest efficiency and lowest power consumption PLC control Screw conveyor full tiled. Specifications Model Diameter (mm) Bowl Speed (rpm) G-force Capacity (m3/h) Main Power (kw) Weight (kg) Overall Size (L × W × H) (mm) PNX-409 250 5500 3493 0.2~2 15/4 1020 2500 × 650 × 760 PNX-414 355 4000 3175 1~10 18.5/7.5 2035 2765 × 920 ×

Solid - Liquid Separation Decanter Centrifuge for Drilling Mud Treatment Equipment Competitive Advantages automatic continuous operation Water level adjustable Highest efficiency and lowest power consumption PLC control Screw conveyor full tiled. Specifications Separation principle Taking advantage of the principle that the light liquid, heavy liquid and solid phase, with different density and mutually insoluble in the mixed liquid, gain different sedimentation speed in the

Design features: The machine can be mainly used for all kinds of suspension which contains fine particle with diameter of 0.005-15mm, the concentration of 1 - 40% and temperature of not more than 100 ℃. Also can be used for the separation of 3-phase mixture in which the solid’s density is higher than the liquid, and there is density difference (liquid-liquid-solid), and the separation of liquid-solid suspension and particles, especially for the suspension separation in which

Design features: The machine can be mainly used for all kinds of suspension which contains fine particle with diameter of 0.005-15mm, the concentration of 1 - 40% and temperature of not more than 100 ℃. Also can be used for the separation of 3-phase mixture in which the solid’s density is higher than the liquid, and there is density difference (liquid-liquid-solid), and the separation of liquid-solid suspension and particles, especially for the suspension separation in which

Automatic Continuous Solid Liquid Decanter Centrifuge Drilling Mud Centrifuge Competitive Advantages automatic continuous operation Water level adjustable Highest efficiency and lowest power consumption PLC control Screw conveyor full tiled. Specifications Model Diameter (mm) Bowl Speed (rpm) G-force Capacity (m3/h) Main Power (kw) Weight (kg) Overall Size (L × W × H) (mm) PNX-409 250 5500 3493 0.2~2 15/4 1020 2500 × 650 × 760 PNX-414 355 4000 3175 1~10 18.5/7.5 2035 2765 ×

Solid Liquid Separation Drilling Decanter Centrifuge For Drilling Fluid / Oil Field Competitive Advantages automatic continuous operation Water level adjustable Highest efficiency and lowest power consumption PLC control Screw conveyor full tiled. Specifications Model Diameter (mm) Bowl Speed (rpm) G-force Capacity (m3/h) Main Power (kw) Weight (kg) Overall Size (L × W × H) (mm) PNX-409 250 5500 3493 0.2~2 15/4 1020 2500 × 650 × 760 PNX-414 355 4000 3175 1~10 18.5/7.5 2035

Titanium Decanter Centrifuge Model PDC14-3-W Used for Chemical, Food, Salt, Mining Product Description Titanium has good stability in acidic, alkaline, neutral salt aqueous solution and oxidizing media, better than the existing stainless steel and other non-ferrous metals corrosion resistance. Titanium good corrosion resistance and stability, determine the application of titanium in the industry is very wide. Our equipment with large processing capacity, low energy consumptio

Titanium Decanter Centrifuge Model PDC14-3-W Used for Chemical, Food, Salt, Mining Product Description Titanium has good stability in acidic, alkaline, neutral salt aqueous solution and oxidizing media, better than the existing stainless steel and other non-ferrous metals corrosion resistance. Titanium good corrosion resistance and stability, determine the application of titanium in the industry is very wide. Our equipment with large processing capacity, low energy consumptio

Design features and benefits: Low, medium and high capacity PDC three-phase decanter centrifuges are designed for efficiency, simple installation, easy maintenance and ease of operation. Special features include: • High performance combined with low energy consumption • Critical parts made from wear resistant material • New control system, Basic Core Controller*, that makes operation simple with easy control and optimization of the dryness level of the solids phases • Compact

Description Horizontal centrifuge characteristics: All parts coming into contact with the product are made of stainless steel. 3-phase AC motor for controlled torque starting via frequency converter Bowl speed is adjustable via VFD to obtain the required G-force for optimized separation Pond depth in the bowl is adjustable for optimized balance between liquid clarity and solids dryness Conveying speed is adjustable for optimized balance between liquid Low personnel costs due

Design features and benefits: Low, medium and high capacity PDC three-phase decanter centrifuges are designed for efficiency, simple installation, easy maintenance and ease of operation. Special features include: • High performance combined with low energy consumption • Critical parts made from wear resistant material • New control system, Basic Core Controller*, that makes operation simple with easy control and optimization of the dryness level of the solids phases • Compact

Design features: The machine can be mainly used for all kinds of suspension which contains fine particle with diameter of 0.005-15mm, the concentration of 1 - 40% and temperature of not more than 100 ℃. Also can be used for the separation of 3-phase mixture in which the solid’s density is higher than the liquid, and there is density difference (liquid-liquid-solid), and the separation of liquid-solid suspension and particles, especially for the suspension separation in which

Design features and benefits: Low, medium and high capacity PDC three-phase decanter centrifuges are designed for efficiency, simple installation, easy maintenance and ease of operation. Special features include: • High performance combined with low energy consumption • Critical parts made from wear resistant material • New control system, Basic Core Controller*, that makes operation simple with easy control and optimization of the dryness level of the solids phases • Compact

Wheat Starch Plant Wheat Flour Decanter Separator Wheat Starch Decanter Centrifuge Tri-Decanter Design features and benefits: The machine can be mainly used for all kinds of suspension which contains fine particle with diameter of 0.005-15mm, the concentration of 1 - 40% and temperature of not more than 100 ℃. Also can be used for the separation of 3-phase mixture in which the solid’s density is higher than the liquid, and there is density difference (liquid-liquid-solid),