EMT Conduit And Fittings

EMT Conduit And Fittings Pre-Galvanized Metal Pipe , Electrical cable conduit Product Description: Electrical conduit provides very good protection to enclosed conductors from impact, moisture, and chemical vapors. Production Standard: ANSI C80.3 Size : from 1/2” -- 4” Length: 3.05m (10 FT) or up to customer’s requirement Surface treatment: Pre-Galvanized or Hot dip galvanized(HDG). Material : carbon steel coil and galvanized steel strip Package: emt conduits are tied into

0.5 Inch - 4 Inch EMT Conduit Fittings Clamp Service Entrance Caps Product Description: Service Entrance Cap 1 Material: Aluminum 2 Type: Threaded type or Clamp type 3 Size: 1/2 inch—4inch 4 Apply: connecting EMT conduit / IMC conduit Field Names: Service entrance caps, weather heads, service entrance heads, service entrance kits, cobra heads, weather caps, utility service caps, meter heads, service heads. Application: These service entrance caps attach to the end of plain

UL Standard Steel Galvanized EMT Set Screw Coupling / Coupler​ Description: EMT Set Screw Coupling EMT set screw couplings are used in dry locations to connect the ends of two EMT conduits together to extend the raceway. Topele's steel set screw couplings provide concrete tight connections when taped and properly secured with the included set screws, and are rated for electrical applications above 600 volts. Their heavy gauge steel construction maintains mechanical protection

UL Listed 90 Degree EMT Conduit And Fittings Pre-galvanized Steel EMT Conduit Elbows Description: Size: 1/2" to 4" Material: Corrosion-resistant galvanized steel Field Names: 90 degree elbow, pre bent 90 degree elbow, TW elbow, EMT elbow. Large radius for easy wire pulling Optimal EMI shielding characteristics For indoor use only interior coating provides a smooth raceway for fast, easier wire-pulling Enables a 90° change of directions in a run of EMT conduit Application:

Galvanized Steel EMT Tube / EMT Conduit And Fittings From 1 / 2” to 4” Descrition: 1.product name : EMT Tube/EMT PIPE/EMT CONDUIT/EMT TUBO ANSI C80.3 2.Standard: ANSI C80.3 3.Tade Size : from 1/2” to 4” 4.Length: 3.05meters, or according to customer’s requirement 5.Usage: emt conduit pass through the electrical wires with the purpose of protection for the electrical raceway system 6.Surface finished: Pre-Galvanized or Hot dip galvanized(HDG). 7.Material : STEEL Q195 8.Package

Aluminum Clamp Service Entrance Cap / Service Entrance Heads Quick Detail: Service Entrance Cap-clamp type 1 Material: Aluminum 2 Type: Threaded or Clamp 3 Size: 1/2 inch—4inch 4 Apply: EMT conduit Field Names: Service entrance caps, weather heads, service entrance heads, service entrance kits, cobra heads, weather caps, utility service caps, meter heads, service heads. APPLICATION: These service entrance caps attach to the end of plain EMT conduits that are being used to

1/2" to 2" 90 Degree Zinc Die Cast IMC / Rigid Pull Elbow IMC Conduit And Fittings IMC/RIGID Pull Elbow Set screw zinc IMC inside corner 1. Material: Zinc 2. Size:1/2', 3/4', 1' 3. Used to connect two IMC conduit in corner Application: These set-screw IMC pull elbows are used when 90° turns are needed in conduits and when wires must be pulled through elbows before making the turn into the electrical junction box or enclosure. Field Names: Pull elbow, IMC handy ells, IMC set

Donut Washers EMT Conduit And Fittings Zinc Plated Steel Reducing Washers Description: Reducing Washer Material: Zinc Plated Steel Size: 3/4"x1/2" to 4"x2-1/2" Field Names: Reducing washers, donut washers, doughnut washers. Application: These reducing washers are used when connectors are smaller than the knockout hole they are intended to fill in a box or enclosure. Specifications: RDW3412 3/4"-1/2 " RDW134 1"-3/4" RDW11412 1-1/4"-1/2" RDW11434 1

EMT Conduit And Fittings Zinc Die Cast Set-screw EMT Pull Elbows Description: 1.Material: Zinc die cast 2.Type: EMT TO EMT EMT TO BOX 3.Size: 1/2"-2" Applications: These set-screw EMT pull elbows are used when 90° turns are needed in conduits and when wires must be pulled through elbows before making the turn into the electrical junction box or enclosure. Field Names: Pull elbow, EMT handy ells, EMT set-screws ells, Jakes, EMT Jakes. Material: Die-cast zinc Specifications:

2 , 3 , 4 Conduit Fittings Set-Screw Type Die Cast EMT Zinc Coupling Description: TOPELE zinc emt couplings are used in dry location to connect the ends of two unthreaded EMT conduits together. TOPELE EMT zinc set-screw couplings provide concrete tight connections when taped. Additionally, These set-screw couplings eliminate the need to thread bald conduits to fit old threaded couplings. EMT conduit couplings are pure zinc material for excellent corrosion protection in damp

Galvanized Steel EMT Conduit Strap /Plain Saddle Strap Two Holes / Zinc Plated EMT Conduit Fittings Description: Application:for securing and mounting conduit, tubing, & cable in corrosive environments Material: Galvanized Steel Size:1/2" to 4" EMT Two Hole Strap Available Stainless Steel Two Hole Straps Field Names:Galvanized Steel EMT Conduit Strap /Plain Saddle Strap Two Holes / Zinc Plated EMT Conduit Fittings EMT Two hole strap, two hole conduit strap, EMT 2 hole Strap.

Carbon Steel Galvanized EMT Conduit Tube , Electrical Metallic Tubing Description: 1.product name : emt tube ANSI C80.3 2.Standard: ANSI C80.3 3.Tade Size : from 1/2” to 4” 4.Length: 3050mm or according to customer’s requirement 5.Usage: emt conduit pass through the electrical wires with the purpose of protection for the electrical raceway system 6.Surface finished: Pre-Galvanized or Hot dip galvanized(HDG). 7.Material : carbon steel coil 8.Package: emt conduits tied into

1/2" To 4" EMT Conduit And Fittings Steel Set Screw EMT Conduit Coupling American Standard Description: TOPELE emt steel couplings are used to connect the ends of two unthreaded EMT conduits together. TOPELE EMT steel set-screw couplings provide concrete tight connections when taped. Additionally, these set-screw couplings eliminate the need to thread bald conduits to fit old threaded couplings. EMT steel couplings are steel and with zinc-plate surface for excellent corrosion

Steel Material EMT Conduit And Fittings EMT Compression Insulated Connector Description: EMT steel Connector American Standard, NPT Thread Size: 1/2" to 4" Material: Steel TOPELE steel emt connectors are used to bond EMT conduit to electrical junction boxes or enclosures. TOPELE EMT steel connectors provide concrete tight connections when taped and properly secured with the included locknut, and are rated for electrical applications above 600 volts. Their heavy gauge steel

Zinc Plated Steel EMT Compression Coupling , EMT Coupling 1/2" To 4" Inch Description: TOPELE EMT compression couplings are used to connect the ends of two unthreaded EMT conduits together. TOPELE EMT compression couplings provide concrete tight connections when taped. Additionally, these couplings eliminate the need to thread bald conduits to fit old threaded couplings. EMT compression couplings are steel and with zinc-plated surface for excellent corrosion protection in

High Quality Hot Sale EMT Steel Compression Connector / 1/2" to 4" Electrical EMT Conduit Fittings Description: TOPELE connectors are used to join,EMT conduit to a box or enclosure in Raintight environments. The design prevents water seepage into conduit, box or enclosure. steel compression connectors are used to bond EMT conduit to electrical junction boxes or enclosures. TOPELE EMT steel cellpadding="0" cellspacing="0"> CCN-50/S 1/2" CCN-75/S 3/4" CCN

1/2" to 2" EMT Conduit And Fittings Zinc Set Screw EMT Inside Corner Pull Ebows Description: Set screw zinc emt inside corner 1. Material: Zinc 2. Size:1/2', 3/4', 1' 3. Used to connect two EMT conduit in corner Application: These set-screw EMT pull elbows are used when 90° turns are needed in conduits and when wires must be pulled through elbows before making the turn into the electrical junction box or enclosure. Field Names: Pull elbow, EMT handy ells, EMT set-screws ells,

4 Inch EMT Conduit And Fittings Aluminum Threaded / Clamp Entrance Cap Description: Service Entrance Cap-clamp type 1 Material: Aluminum 2 Type: Threaded or Clamp 3 Size: 1/2 inch—4inch 4 Apply: EMT conduit Field Names: Service entrance caps, weather heads,service entrance heads, service entrance kits, cobra heads,weather caps, utility service caps, meter heads, serviceheads. Application: These service entrance caps attach to the end of plain EMT conduits that are being used

EMT Compression Coupling Zinc,Set-screw EMT Conduit Fittings Zinc Die Cast EMT Compression Coupling Description: EMT compression Coupling - Zinc American Standard Size: 1/2" to 4" Material: Zinc Die Cast TOPELE emt compression couplings are used in dry location to connect the ends of two unthreaded EMT conduits together. TOPELE EMT zinc compression couplings provide concrete tight connections when taped. Applications: EMT couplings: Joins steel EMT conduit to EMT conduit

Electrical Conduit And Fittings Set Screw Aluminum Die Cast EMT Couplings Description: TOPELE aluminum emt couplings are used in dry location to connect the ends of two unthreaded EMT conduits together. TOPELE EMT aluminum set-screw couplings provide concrete tight connections when taped. Additionally, These set-screw couplings eliminate the need to thread bald conduits to fit old threaded couplings. EMT conduit couplings are pure aluminum material for excellent corrosion