Fiber Optic Media Converters

1000 Base Fiber Optic Media Converter , 1000 Base-Tx & 1000 Base-Fx Converter Quick Detail: Selectable optical link-loss alarm Selectable four transmitting modes Comply with IEEE 802.3 100BASE-FX/TX, IEEE802.3 10BASE-T, Standard Comply with IEEE 802.1Q VLAN TAG, Spanning Tree standard Supports 10/100M, full/half duplex auto-negotiation Supports auto MDI/MDIX crossover Supports transmission distance up to 120km Same card on rack mounted and desktop Supports over-sized packets

Custom Single-mode Fiber Optic Media Converter 100Mbps / 10Mbps Specifications: Performance parameters 1. Delicate module to ensure high performance Reliable data transfer, long life 2. Auto adapt half duplex/full duplex 3. Auto adapt 10Mbps/100Mbps 4. Auto adapt cross and straight connection at Ethernet 5. Built-in storage and transmiss, 1MB buffer, multi-protocol 6. Max data package:1600 bytes 7. MTBF>50000h 8. Power supply:DC9-48V/500mA 9. SC interface(ST,FC optional)

1U 12 Slots Mini Fiber Media Converter Chassis Rack With Dual Power Supply The 1U 12 slots Fiber media converter rack is specially designed for mini Fiber Media Converters. The chassis can install multiple mini media converters business ,which provides for space saving and easy cabling. The chassis works with dual redundant power supply AC , DC optional. Key Features Suitable for standard 19 inch rack 1U , maximum 12 slots capacity Supports several module type media

Multi / Single Mode Fiber Optic Media Converter Transmission 1000 Base-SX / LX The mini 1000Base-LX to 1000Base-SX optical mode converter offers protocol transparent connectivity between different wavelengths or fiber modes for speed from 100Mbps to 1250Mbps. Protocol independence allows for use in broad range of applications including Fast Ethernet, Gigabit Ethernet, OC-12 and Fiber Channel. Features: Supporting inter-conversion between 1000 Base-T and 1000 Base-SX/LX.

1000Base-Tx to 1000Base-Fx Fiber Optic Media Converter to RJ45 Quick Detail: Complies with IEEE 802.3 10 Base-T standard. Complies with IEEE 802.3u 10/100 Base-TX/FX standard. Complies with IEEE 802.3X standard. 10/100/1000Mbps port with full/half duplex auto-negotiation Back pressure flow control for full duplex Converter mode with auto-change-forward(Switch)function Back pressure flow control for full/half duplex IEEE802.3X. Automatic identification of MDI/MDI-X cross-line.

Pigtail FC/APC 1.5M 0.9mm, Yellow Fiber Optic Cable FC Pigtail SM Green Boot Fiber Optic pigtail has connector at one end, the other end is fiber optic cable which be cut off. Then it connect by splice with other cable core. It is widely used in fiber optic terminal box, ODF rack , cabinet to connect with fiber optic media converter/transceivers(use coupler,patch cord too) Features Conforms to ANSI, Bellcore,TIA/EIA,IEC,etc International and domestic standards Fiber

A Fiber optical fiber media converter B SC Optical fiber media converter C External dual fiber D Distance:120km WDM Fast Ethernet fiber optic media converter 20Km SC B type BiDirectional FEATURES a) Inner power or external power optional b) Inner power adopt single slot configuration c) Media converter module could be used with rack mount d) Power supply AC 220V or DC -48V e) Auto identify MDI/MDIX f) Full/half duplex negotiational g) Extend fiber-optic distance up to 120km

Multimode Ethernet Fiber Transceiver SC Fiber Optic Media Converter Long Distrance Quick Detail: Model Number: 10/100BASE Band width:100M ROHS: Yes Specifications Fast Ethernet Media Converter 1. Meet The Long Distrance 2. High-speed 3. Certificated By ROHS.FCC.CE Structure Features: Adopt pluggable design, easy installation, support hot-plug Adopt wall mount design, easy to maintain In the front panel, there is power interface, switch, fiber port, RJ45 port and LED indicator

10/100Base-Tx to 100Base-Fx Fiber Optic Media Converter used in Network Quick Detail: Electrical & Mechanical: --Operating Voltage: AC100V~260V --Power Dissipation: ≤5W --Size:94mm(L)*70mm(W)*26mm(H) Connectors: --Optical: SC --Power: Terminal Block --Electrical: RJ45 ports Led Indicators: --Optical Link/Data Activity --Electrical Link/Data Activity Data: --Data Interface: Ethernet --Data Rate:10/100Mbps --IEEE802.3Compliant --Full Duplex or Half Duplex Electrical Environment

1MB , 10 / 100TX to SC Fiber Optic Media Converter DC9 / 48V Specifications: Performance parameters 1. It uses a high-quality photoelectric integration module to provide good optical properties and electrical properties to ensure reliable data transmission, with a long working life. 2. Support full-duplex or half duplex mode, and with auto-negotiation capability. 3.10 Mbps and 100Mbps auto-adapt. 4. Ethernet ports support automatic cross-identification. 5. With store and

10M and100M Ethernet Fiber Optic Media Converter Full-duplex Specifications: Support full-duplex or half-duplex mode, with auto-negotiation capability 10Mbps and 100Mbps are auto-adapt Electricity and Ethernet ports support automatic cross-identification Built-in store forwarding mechanism; 1MB cache; multiple protocols supported Support the maximum transmission packet size of 1600 bytes of data In line with Telecom operating standard, MTBF 50,000 hours or more Working power

10 / 100TX to SC Fiber Optic Media Converter - 1 TCP / IP Port Description: This unit is special designed for data transmision between 100Base-TX and 100Base-FX or FL . Especially suit for smart building or optical to room Auto adapt 10Mbps/100Mbps, easy to upgrade. Extend STP:100M to Optical fiber:100KM, easy for your connection to Server, repeater, hub, terminal Specifications: Performance parameters 1. Delicate module to ensure high performance Reliable data transfer, long

F / H Duplex Fiber Optic Media Converter With RS-232 RS-485 RS-422 Interface Compatible with the Recommended Standards of RS-232C, RS-422 and RS-485, FR-316 interface converter can convert the single-ended RS-232 signal into balance differenced RS-422 or RS-485 signal. Also, there is a rapid transient voltage suppression protector for protection of RS-422/RS-485 interface with advanced TVS(TRANSIENT VOLTAGE SUPP R ESSOR) technology adopted. Under normal conditions, the TVS

16slots 2 U Rack Mount Fiber Optic Media Converter with automatic switch Quick Detail: Structure: 2 U Rack mounted Operating humidity: 5%~95%(no-condensing) Power output: DC 5V 1A Power consumption: 5W Power input: AC 85~265V 50/60Hz Operating temperature: -10C~55C Description: Rack Mounted chassis is a centralized and economical equipment of gather Ethernet media converter together. It covers two styles, 14 slots and 16 slots and used in plant room with centralized dual

Multimode Industrial Fiber Optic Media Converter 1 TCP / IP Port Specifications: Performance parameters 1. It uses a high-quality photoelectric integration module to provide good optical properties and electrical properties to ensure reliable data transmission, with a long working life. 2. Support full-duplex or half duplex mode, and with auto-negotiation capability. 3.10 Mbps and 100Mbps auto-adapt. 4. Ethernet ports support automatic cross-identification. 5. With store and

Standalone Dual Fiber Media Converter 2U 14 Slots for gigabit The 2U 14 slots Fiber media converter rack is specially designed for mini Fiber Media Converters. The chassis can install multiple mini fiber optic converters business ,which provides for space saving and easy fiber internet cables. The chassis works with dual redundant power supply AC , DC optional. Key Features Suitable for standard 19 inch rack 2U height, maximum 14 slots capacity Supports several module type

Fiber Optic Media Converter , Single-mode 20km And SC / FC Specifications: Performance parameters 1. The quality optical integration module provides excellent optical and electrical properties. It ensures reliable data transmission and long working life. 2. It supports both full-duplex and semi-duplex modes, and it also possesses auto-negotiation capability. 3.10Mbps and 100Mbps adjust automatically. No manual adjustment required. 4. Electrical interface supports fully

External Switching Power 1000M SFP Fiber Optical Media Converter with IEEE802.3 Standard Supporting inter-conversion between 1000 Base-T and 1000 Base-SX/LX. Supporting full-duplex and half-duplex and its auto-sensed. Supporting automatic cross connection of twisted pair interfaces, facilitating system commissioning and installation. Supporting the transmission of extra-long VLAN packets. Supporting Quality of service and ensuring the transmission of VOIP packets. Supporting

100Base FX Mini Fiber Optic Media Converter Multimode 2Km SC IEEE802.3u Quick Details: •Key Features •- 10/100Base-TX UTP to 100Base-FX Fiber Optic media convertion •- Support IEEE802.3 10Base-T, •IEEE802.3u 100Base-TX/FX standards •- Choice of SC, BiDi or other connectors for •multimode and single-mode •- DIP switch to set different configurations •- LFP (Link Fault Pass-through) support •- Compact package size The mini 10/100Base-TX to 100Base-FX Fiber Optic Media Converter

Multi-mode Fiber Optic Media Converter - IP Port , 10 / 100 Mbps Specifications: 1. Delicate module to ensure high performance Reliable data transfer, long life 2. Auto adapt half duplex/full duplex 3. Auto adapt 10Mbps/100Mbps 4. Auto adapt cross and straight connection at Ethernet 5. Built-in storage and transmiss, 1MB buffer, multi-protocol 6. Max data package:1600 bytes 7. MTBF>50000h 8. Power supply:DC9-48V/500mA 9. SC interface(ST,FC optional) Description: This unit is