Magnetic RJ45 Jack

Specifications of 7499210121A 100base-TX RJ45 Jack: Parameter Specification Part Number 7499210121A Speed 100BASE-TX Datasheet Contact us Turns Ratio (Primary: Secondary) 1CT:1CT Inductance 350 µH Insulation Test Voltage 1500 V (RMS) Configuration 1x1 Tab Direction Down PoE Support Yes (PoE) Temperature Range -40°C to +85°C Moisture Sensitivity Level MSL 1 Mating Cycle 750 EMI Finger No Mounting Angle Right Angle Gold Plating Thickness 50 µ" Length 21.25 mm Width 16.00 mm

74981104400​ Specifications: Property Value Manufacturer LINK-PP Part Number 74981104400 Product Series WE-RJ45 LAN Number of Ports 1 x 1 Ethernet Standard 10/100/1000 Base-T Mounting Type THR (Through Hole Reflow) Orientation 90° Angle (Right) LEDs Green/Yellow - Green/Yellow Shielding Shielded, Tab-Up Number of Contacts 8P8C (8 Position, 8 Contact) Operating Temperature -40 °C to +85 °C Turns Ratio (Tx/Rx) 1:1 / 1:1 Inductance (OCL) 350 µH min. @ 100 kHz, 100 mV, 8 mA DC

7498111124 RJ45 MagJack Specifications: The 7498111124 is a WE-RJ45LAN series Through Hole Reflow RJ45 Connector with integrated magnetics, suitable for 1000BASE-T Ethernet applications. This product complies with IEEE 802.3ab standards and is RoHS and REACH compliant. Specification Details Connector Type THR RJ45 Magnetic Connector Number of Ports 1 Part Number 7498111124 Speed 10/100/1000Base-T Tab Down PoE Non Improved CMRR NO Shielding Shielded With EMI Fingers Mounting

7498111123 1000BASE-T THR Mount RJ45 Connector Overview The WE-RJ45LAN series 7498111123 RJ45 connectors with 1000BASE-T integrated magnetics are designed for seamless and efficient integration into Ethernet interfaces. The 7498111123 model, specifically engineered for Through Hole Reflow (THR) soldering, combines an RJ45 connector with an integrated transformer and common mode choke. This compact design is approximately 50% smaller than discrete magnetics solutions,

1-1840744-3 Magjack Descriprion : The 1-1840744-3 is a high-performance Integrated Connector Module (ICM) designed for robust Ethernet connectivity. By integrating magnetics directly into the RJ45 interface, this compact module ensures superior signal integrity, EMI/RFI suppression, and space efficiency, making it ideal for next-generation networking and industrial systems. Key Features ★ Integrated Magnetics Combines the RJ45 jack with internal magnetic components including

Specifications of 1-184727-6 RJ45 Magjack: Specification Details Connector Type RJ45 with Integrated Magnetics Number of Ports Single (1X1 Configuration) Application 1000BASE-T Gigabit Ethernet Circuit Type Gigabit Current LED Configuration Green/Yellow Tab Direction Up Housing Material Thermoplastic, Black, UL 94V-0 Rated Shield Material Copper Alloy with Nickel Plating Contact Material Phosphor Bronze with Gold Plating LED Current Constant Current at Approx. 20mA Operating

7498111001A Magjack Specification: Parameter Value Part Number 7498111001A Type 1000BASE-T MagJack Description 1000Base-T RJ45 Connector with Integrated Transformer PoE Support No Ports 1 Tab Direction Up LED No LED Auto MDIX Yes Operating Temp. -40 °C to +85 °C Application IEEE 802.3ab Compliant for 1000Base-T Electrical Specifications (@25°C) Parameter Specification Inductance (OCL) 350 µH min @ 100 kHz, 100 mV, 8 mA DC Bias Turns Ratio (TR) 1:1 (TX), 1:1 (RX) @ 100 kHz /

Properties of 1-1840648-4 Magjack Parameter Specification Part Number 1-1840648-4 Product Type Integrated Connector Module (ICM) Number of Ports 2x1 Port Configuration Stacked Supported Speed 10/100/1000BASE-T Duplex Mode Full Duplex Mounting Type Through-Hole Mount Height Profile Standard EMI Tabs Yes LED Yes LED Type GY/GY Isolation Voltage 1500 Compliance Standard IEEE 802.3 Operating Temperature Range 0 ~ +70 Flammability Rating UL 94V-0 Length 28.12mm Width 17.16mm

Overview The 1-1840052-9 is a 2x1 integrated connector module (ICM) designed for Gigabit Ethernet applications, with LED indicators for network status monitoring. This compact, high-performance module integrates magnetics, RJ45 connectors, and signal conditioning into a single package, simplifying PCB design for networking equipment. Key Specifications Parameter Specification Model 1-1840052-9 Configuration 2x1 (Dual-Port) Data Rate 10/100/1000 Mbps (Gigabit) LED Indicators

Technical Specifications of 1-1840026-1 RJ45 with USB Combo: Parameter Specification Part Number 1-1840026-1 Connector Type RJ45 with Dual USB Type-A Ethernet Speed 10/100BASE-T LED Indicators Green Mounting Style Through-Hole (THT) Orientation Right Angle (Horizontal) Tab Direction Up Shielding Yes Operating Temperature Range 0°C to +70°C Compliance RoHS Compliant 1-1840026-1 RJ45 Magjack with Dual USB Drawing: Networking Equipment Applications: • Storage • Switches •

Materials Specifications of 1-1840052-1 RJ45 2X1: Plastic Housing: Black, thermoplastic flammability rating UL 94V-0. Shield: Brass, preplated with 0.76mm minimum semi-bright nickel. Post-plated with 2.54mm minimum solder or pure tin on solder tails. Contacts: Phosphor bronze, 1.27mm gold overall nickel. Underplate with select 1.27mm min gold on wipe area, with min gold over 0.76mm min palladium-nickel at mating interface and 2.54mm min matte tin on solder tails. Undiffused

Features of S11-ZZ-0401 2.5G RJ45 Connector: High-Speed Data Transmission: Supports 2.5G Base-T data rates, enabling efficient bandwidth-intensive networking in applications like networking devices, industrial controls, and high-speed data systems. 2. Through-Hole Mounting: ensures secure PCB integration and robust mechanical stability for industrial and commercial use. 3. Latch Orientation: Tab Down latch configuration simplifies cable insertion/removal and optimizes cable

HR913129C Magnetic RJ45 Connector Specifications : Items Shielded RJ45 Connector Material Specification Housing PA66 GF Black UL94V–0 Shield 30u" Nickel over 0.20mm Thickness Brass Insert PA66 GF Black UL94V–0 Phosphor Bronze 0.35mm Thickness Plating Area: 30u" gold over 50u" nickel Solder Area: 100u" tin over 50u" nickel Mechanical Performance Mating force 5 lbs Maximum Unmating force 5 lbs Maximum Plug to Jack Retention force 20 lbs Minimum Operating life 750 Cycles Mi

Descriptions of Amphenol RJ45 Connector The RJMG201K21120FR Modular Jack with Integrated Magnetics is fully RoHS compliant. Designed to meet IEEE802.3ab standards, this Magnetic Jack operates within a standard temperature range of 0°C to 70°C, and an extended range of -40°C to 85°C. Low mode conversion and improved EMI performance for reliable data transmission. With features like low mode conversion, improved EMI performance, and easy PCB assembly, it provides a comprehensiv

RJ45 Durability Testing Rating & Material Specification: 1. Durability: 750 Insertions 2. Mating Force: 5 lbs./2.268 kgs. 3. Shield Material: Brass Shield Finish: 30µ inches Nickel over 4. Contact Material: Phosphor Brass Contact Plating Area: 50µ inches Nickel over selective gold plating 6µ inches 5. Housing Material: UL 94V-0 Thermoplastic J1B1211CCD 10/100 BASE-T RJ45 Connector Features: Shielded with EMI Finger Through Hole Solder Mounting Suitable for CAT 5 & 6 Fast

Key Features of RJ45 Jack with Magnetics​: ​Low mode conversion DlP type Shielded and improved EMl performance Green - Yellow LEDs Integrated Magnetics 6u" Gold plating of contact area Meets a wide range of cable performance requirements up to Cat 6a Facilitates easy PCB assembly Provides DC isolation Operating Temperature :-40°C T0 +85°C Storage Temperature :-40°C T0 +85°C JACK CAVITY CONFORMS TO FCC RULES AND REGULATIONSPART 68 REFLOW SOLDERING TEMPERATURE: 250°C FOR 10

MultiPort RJ45 Connector Materials: 2301997-7 RJ45 with Magnetics using high-quality materials. The housing and insert are made from LCP (Liquid Crystal Polymer) rated UL94 V-0 for flame resistance. The shield is brass with nickel plating for corrosion resistance. The contact material is a copper alloy, with selective gold plating (minimum 0.76 μm or 30 μinch) over 1.27 μm (50 μinch) of nickel in the contact area. The solder pins are plated with tin over nickel, and the

74991114412 Wave Soldering Specifications: Profile Feature Pb-Free Assembly Sn-Pb Assembly Preheat Temperature Min 100 °C 100 °C Preheat Temperature Typical 120 °C 120 °C Preheat Temperature Max 130 °C 130 °C Preheat Time ts from Ts min to Ts max 70 seconds 70 seconds Ramp-up Rate 150 °C max 150 °C max Peak Temperature 250 °C - 260 °C 235 °C - 260 °C Time of actual peak temperature max. 10 seconds max. 5 seconds each wave max. 10 seconds max. 5 seconds each wave Ramp-down

LINK-PP RJ45 ICMs Description: Featuring a popular footprint and compatible package to industry RJ45 Integrated Connectors standards, the LINK-LPJG48831A52NL is an RJ45 Integrated Connector 1G Base-T with a 1x4 Port configuration and Shielded EMI Finger long body with RoHS compliant. These through-hole components provide reliable performance and maintain signal integrity that Meets IEEE 802.3 specifications. The LPJG48831A52NL RJ45 Integrated Connectors are designed for

7499010211A WE-RJ45 LAN Specifications: Single Port RJ45 8P8C Jack with 10/100 Base-T Integrated Magnetics, Green/Yellow, Tab Down, RoHS LINK-PP Part Number LPJ4011BBNL Application-Lan ETHERNET(NoN PoE) Part Number 7499010211A Contact Mating Area Plating GOLD 6u"/15u"/30u" Cores per Port 4 Diodes NO DIODES LED Option GREEN/YELLOW Latch TAB DOWN Number of Ports 1X1 PCB Mount Angle SIDE ENTRY Package Height (mm) 13.40 Package Length (mm) 21.30 Package Width (mm) 15.90 Pin Type