EMT Conduit And Fittings

Aluminum / Zinc Die Cast Flexible Conduit And Fittings 1/2" to 1" SCREW IN FLEX CONDUIT CONNECTOR MATERIAL:ZINC DIE CAST or aluminum die cast SIZE:3/8”—1” Zinc Die Cast Interior Flex Connector Application: Screw-In Connector, Die Cast Zinc. For use with Armored Cable/Flexible Metal Conduit. connectors screw in to the interior ridges of flexible metal conduits and provide a smooth pulling surface for wires when connected to electrical junction boxes or enclosures. Specificatio

Steel Die Cast EMT Conduit And Fittings EMT Compression Insulated Connector Description: EMT steel Connector American Standard, NPT Thread UL Standard 514B Size: 1/2" to 4" Material: Steel TOPELE steel emt connectors are used to bond EMT conduit to electrical junction boxes or enclosures. TOPELE EMT steel connectors provide concrete tight connections when taped and properly secured with the included locknut, and are rated for electrical applications above 600 volts. Their

IMC Conduit And Fittings Zinc Plated Steel 1 / 2”— 4”One-hole Conduit Strap IMC Pipe / Conduit Strap-one hole Material: Zinc Plated Steel SIZE: 1/2”—4” Field Names: IMC Conduit straps, IMC conduit one-hole strap, IMC conduit clip, IMC one hole strap Applications: These conduit straps are used to mount IMC conduits to any surface. Specifications: Part number Type Size Std. Conduit EMT/IMC OSP-50 1/2” EMT/IMC OSP-75 3/4” EMT/IMC OSP-100 1” EMT/IMC OSP-125 1-1/4” EMT/IMC OSP-150

UL Steel EMT Conduit And Fittings NPT Thread Zinc EMT Compression Connectors Description: EMT Compression Connector American Standard, NPT Thread UL Standard 514B Size: 1/2" to 4" Material: Zinc Die Cast TOPELE emt compression connectors are used in dry locations to bond unthreaded EMT conduit to electrical junction boxes or enclosures. TOPELE EMT compression connectors provide concrete tight connections when taped Its steel construction maintains mechanical protection and

Donut Washers EMT Conduit And Fittings Zinc Plated Steel Reducing Washers Description: Reducing Washer Material: Zinc Plated Steel Size: 3/4"x1/2" to 4"x2-1/2" Field Names: Reducing washers, donut washers, doughnut washers. Application: These reducing washers are used when connectors are smaller than the knockout hole they are intended to fill in a box or enclosure. Specifications: RDW3412 3/4"-1/2 " RDW134 1"-3/4" RDW11412 1-1/4"-1/2" RDW11434 1

EMT Conduit Pipe Fittings , Galvanized Steel One Hole Conduit Strap Introduction of the EMT one hole strap One hole steel conduit strap is applied in conduit fixing. It can fasten conduit steadily to the wall with one screw tightened one side. 1 Rich sizes(refer to the details) available to accommodate EMT conduit in different specifications 2 Smooth surface provide easy installation and visual enjoyment. 3 High grade material provide high quality product Application of the

514B Zinc Plated Steel EMT Compression Coupling , EMT Coupling 1/2 Inch To 4 Inch Description: TOPELE EMT compression couplings are used to connect the ends of two unthreaded EMT conduits together. TOPELE EMT compression couplings provide concrete tight connections when taped. Additionally, these couplings eliminate the need to thread bald conduits to fit old threaded couplings. EMT compression couplings are steel and with zinc-plated surface for excellent corrosion

EMT Conduit and Fittings EMT Conduit and Fittings - EMT products including EMT, IMC, Rigid Steel Conduit and some fittings like Elbow, Connector, Coupling, Straps, Outlet Box, Galvanized Flexible Conduit, Liquid Tight Conduit and Fittings, Strut Channel and Fittings etc.

Aluminum EMT Conduit And Fittings Quick Detail: Service Entrance Cap-clamp type 1 Material: Aluminum 2 Type: Threaded or Clamp 3 Size: 1/2 inch—4inch 4 Apply: EMT conduit Field Names: Service entrance caps, weather heads, service entrance heads, service entrance kits, cobra heads, weather caps, utility service caps, meter heads, service heads. APPLICATION: These service entrance caps attach to the end of plain EMT conduits that are being used to bring over-head power to

EMT Conduit And Fittings Carbon Steel Galvanized Tube , Electrical Metallic Tubing UL Standard Description: Electrical metallic tubing (EMT), sometimes called thin-wall, is commonly used instead of galvanized rigid conduit (GRC), as it is less costly and lighter than GRC. Tade Size : from 1/2” to 2” Length: 3050mm or according to customer’s requirement Surface finished: Pre-Galvanized or Hot dip galvanized(HDG). Material : carbon steel coil Package: emt conduits tied into

514B Zinc Plated Steel EMT Compression Coupling , EMT Coupling 1/2 Inch To 4 Inch Description: TOPELE EMT compression couplings are used to connect the ends of two unthreaded EMT conduits together. TOPELE EMT compression couplings provide concrete tight connections when taped. Additionally, these couplings eliminate the need to thread bald conduits to fit old threaded couplings. EMT compression couplings are steel and with zinc-plated surface for excellent corrosion

Carbon Steel Galvanized EMT Conduit And Fittings 3 Inch EMT Accessories Description: 1.Product Name : EMT Pipe 2.Standard:UL797 & ANSI C80.3 3.Tade Size : From 1/2” to 4” 4.Length: 3050mm (10 feet) or according to customer’s requirement 5.Usage: EMT conduit pass through the electrical wires with the purpose of protection for the electrical raceway system 6.Surface Finished: Pre-Galvanized or Hot dip galvanized(HDG). 7.Material : Carbon Steel Coil 8.Package: EMT conduits tied

Pre-galvanized Steel Elbow EMT Conduit And Fittings , EMT Conduit Elbows Description: Size: 1/2" to 2" Material: Pre-galvanized steel Field Names: 90 degree elbow, pre bent 90 degree elbow, TW elbow, EMT elbow. Application: These 90 EMT elbows are used to connect steel EMT conduits together allowing 90 degree bends. Specifications: EELB50 1/2" EELB75 3/4" EELB100 1" EELB125 1-1/4" EELB150 1-1/2" EELB200 2" EELB300 3" EELB400 4" Competitive Advant

UL514B EMT Conduit And Fittings Zinc Die Cast Set-screw EMT Pull Elbows With Gasket Description: 1.Material: Zinc die cast 2.Type: EMT TO EMT EMT TO BOX 3.Size: 1/2"-2" 4.Standard: UL514B Applications: These set-screw EMT pull elbows are used when 90 turns are needed in conduits and when wires must be pulled through elbows before making the turn into the electrical junction box or enclosure. Field Names: Pull elbow, EMT handy ells, EMT set-screws ells, Jakes, EMT Jakes.

UL Steel EMT Pipe Fittings , NPT Thread Zinc EMT Compression Connectors Description: EMT Compression Connector American Standard, NPT Thread UL Standard 514B Size: 1/2" to 4" Material: Zinc Technics: Casting TOPELE emt compression connectors are used in dry locations to bond unthreaded EMT conduit to electrical junction boxes or enclosures. TOPELE EMT compression connectors provide concrete tight connections when taped Its steel construction maintains mechanical protection

1/2" To 4" EMT Conduit And Fittings Steel Set Screw EMT Conduit Coupling American Standard Description: TOPELE emt steel couplings are used to connect the ends of two unthreaded EMT conduits together. TOPELE EMT steel set-screw couplings provide concrete tight connections when taped. Additionally, these set-screw couplings eliminate the need to thread bald conduits to fit old threaded couplings. EMT steel couplings are steel and with zinc-plate surface for excellent corrosion

UL Steel EMT Conduit And Fittings NPT Thread , EMT Compression Connector - Steel Description: TOPELE emt compression connectors are used in dry locations to bond unthreaded EMT conduit to electrical junction boxes or enclosures. TOPELE EMT compression connectors provide concrete tight connections when taped Its steel construction maintains mechanical protection and solid grounding of the conduit to the designated electrical junction box or enclosure. They eliminate the need

Clamp Connector / Cable connector/ Clamp NM Connector/BX connector 3/8"--1" Description: 1/2” Zinc Set Screw Romex connector Size:1/2' 3/4' 1' Made of zinc Type:set screw Connect cable to steel outlet boxes Field Names: UF connector, underground feeder connector, service entrance cable connector, snap in cable connector.clamp connector, cable clamp connector Applications: Use the TOPELE 1/2-1 in. Set Screw Clamp Connectors to connect underground electrical service feeder

UL514B EMT Conduit And Fittings Zinc Die Cast Set-screw EMT Pull Elbows Description: 1.Material: Zinc die cast 2.Type: EMT TO EMT EMT TO BOX 3.Size: 1/2"-2" 4.Standard: UL514B Applications: These set-screw EMT pull elbows are used when 90 turns are needed in conduits and when wires must be pulled through elbows before making the turn into the electrical junction box or enclosure. Field Names: Pull elbow, EMT handy ells, EMT set-screws ells, Jakes, EMT Jakes. Material: Die

EMT compression Coupling-Zinc , Set-screw EMT Conduit And Fittings Zinc Die Cast EMT Compression Coupling Description: TOPELE emt compression couplings are used in dry location to connect the ends of two unthreaded EMT conduits together. TOPELE EMT zinc compression couplings provide concrete tight connections when taped. EMT compression Coupling American Standard UL Standard 541B Size: 1/2" to 4" Material: Zinc Die Cast Applications: EMT couplings: Joins steel EMT conduit to