Stainless Steel Bright Annealed Tube

AISI GB DIN JIS EN ASTM stainless steel tube Hot Rolled with annealing surface 1. Commodity: Cold Drawn 310S stainless steel tube 2. Brand: JISCO, LISCO, TISCO 3. Grade: 310S 4. Certification: ISO,SGS BV 5. Surface: Annealed & Pickled, Bright Annealed,Polished or as requested 6. Thickness: 2.5mm-4mm 7. Outer Diameter: 25mm-57mm 8. Length: 2-12m or as customer request 9. Standard: ASTM , AISI ,GB ,DIN ,JIS ,EN Specifications Specifications: 1.PRODUCT Stainless 310S Seamless

Tensile Strength Stainless Steel Round Bar S32205 With Corrosion Resistance Duplex 2205 is a nitrogen enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steels. “Duplex” describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. The structure of 2205 duplex stainless steel consists of austenite pools surrounded by a

Bright Annealed Stainless Steel Seamless Pipe Tube fixed length Quick Detail: Bright annealed stainless steel seamless pipe/tube Suitable for pressurized pipes Certificate: PED&ISO BRIGHT ANNEALED SEAMLESS STAINLESS STEEL PIPE. 1.Technical Standard: ASTM A213/A213M-OSC GB13296-91 seamless stainless steel tubes for boiler and heat exchanger 2.Characteristics of Product: high precision, smooth surface,good corrosion resisting and high temperature/pressure resisting 3.Applicatio

ASTM A688 TP304/304L/304LN , TP316/316L/316LN Welded Austenitic Stainless Steel Feedwarter Heater Tubes Size range: O.D.: 4.0-230mm W.T.:1-30mm L: according to customer requirement Material and Manufacture: Tubes are made from Flat-rolled steel by automatic welding process. Subsequent to welding and prior to final heat treatment, the tubes are cold drawn or cold rolled The tubes are ready for U-bending after annealed, according to customer's drawing and design. Suface

Stainless Steel Bright Annealed Boiler Tube TP304 TP304L TP316L TP321 1.Technical Standard: ASTM A213/A213M-OSC GB13296-91 seamless stainless steel tubes for boiler and heat exchanger 2.Characteristics of Product: high precision, smooth surface,good corrosion resisting and high temperature/pressure resisting 3.Application: be suitable for pressurized pipes in varoious kinds of boiler and heat exchanger etc. 4.Specification: Grade:304/304L/316/316L/316Ti/321 ETC, DIN/EN grades

cold-drawn pickling Stainless Steel Heat Exchanger Tube, A249 A269 Tube Specifications 1. 100% Guaranteed cold rolled material 2. ASTM A249/A269 Bright Anneal or Anneal Pickle 3. Attractive price for 304 &316L PRODUCT NAME: STAINLESS STEEL HEAT EXCHANGER TUBE Name STAINLESS STEEL HEAT EXCHANGER TUBE Standard ASTM, GB, JIS, DIN, EN, AISI, ISO Material Grade TP304 TP304L TP316 TP316L TP347 TP347H TP321 TP321H TP310 TP310S TP410 TP410S TP403 S31803/S32205 S32750 S32760 Outer

ASME SA249 / ASTM A249 Stainless Steel Welded Tubing, bright annealed , Plain End , TP321, TP321H YUHONG SPECIAL STEEL deal with Stainless steel pipe and tube already more than 10 years, every year sell more than 80000 tons of stainless steel seamless pipe and tube. Our client already cover more than 45 countries. Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes oF A 249 / SA 249 1.1 This specification covers nominal

Cold Drawn Annealed Stainless Steel Tubing ASTM A312 / A213 TP310 TP310S Quick Detail: 1.Technical Standard: ASTM A213/A213M-OSC GB13296-91 seamless stainless steel tubes for boiler and heat exchanger 2.Characteristics of Product: high precision, smooth surface,good corrosion resisting and high temperature/pressure resisting 3.Application: be suitable for pressurized pipes in varoious kinds of boiler and heat exchanger etc. 4.Specification: Grade:304/304L/316/316L/316Ti/321

Seamless Stainless Steel Bright Annealed Tube ASTM A312 / A213 / A269 Quick Detail: Bright annealing tubing will have a better surface condition and mechanical properties,which is used widely by special industry ,BA tube is highly depended on the equipment thus the cost will be expensive. 1.Technical Standard: ASTM A213/A213M-OSC GB13296-91 seamless stainless steel tubes for boiler and heat exchanger 2.Characteristics of Product: high precision, smooth surface,good corrosion

ASTM A213 Seamless Stainless Steel Bright Annealed Tube , Cold Drawn / Cold Pilgered Quick Detail: Bright annealing tubing will have a better surface condition and mechanical properties,which is used widely by special industry ,BA tube is highly depended on the equipment thus the cost will be expensive. 1.Technical Standard: ASTM A213/A213M-OSC GB13296-91 seamless stainless steel tubes for boiler and heat exchanger 2.Characteristics of Product: high precision, smooth surface

Annealed Cold Rolled S32750 2507 Seamless Stainless Steel Tube / Pipe , 10 mm to 323.8mm OD Descrition: 1. Arts and crafts Cold rolled, Cold drawn, Fully annealed, Passivation 2. Standard ASTM/ASME A790 3. Material grade duplex stainless steel S32750 2507 tube 4. OUTSIDE DIAMETER 10 mm to 323.8mm 5. NPS 1/4" to 12" 6. THICKNESS 1mm to 15mm 7. Length 1,000mm to 12,000mm or as your requirements End type Plane End and Beveled End, all capped with caps 8. Surface Treatment A.

Quick Detail: Bright annealing tubing will have a better surface condition and mechanical properties,which is used widely by special industry ,BA tube is highly depended on the equipment thus the cost will be expensive. 1.Technical Standard: ASTM A213/A213M-OSC GB13296-91 seamless stainless steel tubes for boiler and heat exchanger 2.Characteristics of Product: high precision, smooth surface,good corrosion resisting and high temperature/pressure resisting 3.Application: be

304 / 304L / 316 / 316L Stainless Steel Bright Annealed Tube for Heat Exchanger Quick Detail: Bright annealing tubing will have a better surface condition and mechanical properties,which is used widely by special industry ,BA tube is highly depended on the equipment thus the cost will be expensive. 1.Technical Standard: ASTM A213/A213M-OSC GB13296-91 seamless stainless steel tubes for boiler and heat exchanger 2.Characteristics of Product: high precision, smooth surface,good

TP304 / 304L / 316L / 310S Bright Annealed Stainless Steel Tube High Precision Specification: 1. Grade:304/304L/316/316L/316Ti/321 2. OD:6MM-210MM 3. WALL: 1MM-10MM Bright annealing tubing will have a better surface condition and mechanical properties,which is used widely by special industry ,BA tube is highly depended on the equipment thus the cost will be expensive. 1.Technical Standard: ASTM A213/A213M-OSC GB13296-91 seamless stainless steel tubes for boiler and heat

Specification: 1-Out diameter:6 to 89mm 2-Thickness:0.5 to 8mm 3-Grades:304,304L,316,316L,321,310S.. 3.0 um Ry or better internal surface finish for 6mm and larger sizes Highly consistent chemistry and dimensions Bright annealed with high-quality protective gasses Excellent for welding Suitable for bending, flaring, and other forming needs Length: unfixed length or fixed length Marking: Material grade, standard,specification,heat No. Mill test certification: according to En

Description. Mesh-belt Type Stainless Steel Bright Annealing Furnace(Steel belt) Main application and structural features: 1,Adopting ammonia dissociation atmosphere as protective atmosphere, workpieces is non-oxidizing heated ,cooled in the condition of high temperature, reaching bright treatment effect. 2,Suitable for the powder metallurgical sintering, brazing (brazing, silver soldering, etc.) of various precision parts , copper alloy parts, magnetic materials’ bright

UNS S31803 S32750 Stainless Steel Bright Annealed Tube high precision Quick Detail: Bright annealed stainless steel seamless pipe/tube Suitable for pressurized pipes Certificate: PED&ISO BRIGHT ANNEALED SEAMLESS STAINLESS STEEL PIPE. 1.Technical Standard: ASTM A213/A213M-OSC GB13296-91 seamless stainless steel tubes for boiler and heat exchanger 2.Characteristics of Product: high precision, smooth surface,good corrosion resisting and high temperature/pressure resisting 3

ASTM A213 ASTM A249 304 Stainless Steel Heat Exchanger Tube , OD 15.9mm-139.8mm Quick Detail: Size Random: 6mm to 50.8mm Thickness Random: 0.5mm to 3.0 mm Length Random: 6000mmm Surface Finish: 2B Finish, BA Finish, No.1 Finish etc. Tube Standard: ASTM A249 , ASME SA249 304 Nickel Content: Above 8% 316L Nickel Content: Above 10% 321 Nickel Content: Above 9% ... Specifications Grade 200Series And 300 Series Length Nomal is 6/5.8m,or according to customer's demand Size OD ( 6mm

TP304, TP304L, TP316, TP316L, TP316Ti Stainless Steel Bright Annealed Tube with Cold Press Characteristic: With cold press (mainly cold rolling), the gas protects heat treatment, with high precision: ID:Ra≤0.4μm,OD:Ra≤0.8μm；Mainly for precision instrument, Hydraulic pressure system, exhaust gas system etc. Standard: ASTM/ASME A/SA213, A/SA269, DIN17458/17457, EN10216-5/10217-7. After negotiation, we can supply pipe with customers’ requirement. Material Grade: TP304, TP304L,

Pickled / Bright Annealed Stainless Steel Seamless Tube , ASME SA213 TP316 / 316L Specification: ASME SA213/A213: Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater and Stainless Steel Heat Exchanger Tubes. ASTM A249 / A249M: Welded Austenitic Steel Boiler,Superheater Heat-Exchanger & Condenser Tubes. More Standard:DIN 17456 , DIN 17458, EN10216-5, GOST 9940-81, GOST 9941-81, JIS-G3463,... American Standard Austenitic Steel: TP304,TP304L,TP304H, TP304N, TP310S