Stainless Steel Plates

S31254 254SMO Hot Rolled Alloys Stainless Steel Plates 1.5-3mm Thickness General Properties Alloy 254 SMO is a very high end, molybdenum and nitrogen alloyed super austenitic stainless steel with low carbon content. It demonstrates outstanding resistance to pitting, crevice corrosion stress cracking, and corrosion fatigue uniform corrosion. Alloy 254 SMO is substantially stronger than the common austenitic grades, with strength nearly twice that of 300 series stainless steel.

AISI 926 EN 1.4529 X1NiCrMoCuN25-20-7 Stainless Steel Plates Flat Shape 1.4529 Stainless Steel Plate AISI 926 EN 1.4529 (X1NiCrMoCuN25-20-7) Stainless Steel1.4529 Steel Grade :X1NiCrMoCuN25-20-7Number:1.4529Standard:EN 10088 - 2 : 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposesEN 10088 - 3 : 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire,

General Properties Alloy 17-4 is a chromium-copper precipitation hardening stainless steel that is used for applications requiring high strength and a moderate level of corrosion resistance. It is one of the most widely used precipitation hardening grades, as it has high strength hardness up to about 572°F while demonstrating good corrosion resistance in all heat treated conditions. Alloy 17-4 has adequate resistance to atmospheric corrosion or in diluted acid salts where its

Duplex Steel Plate Specifications Duplex Steel UNS S31803/S32205 Sheets, Plates, Coils Specification Specifications : ASTM A240 / ASME SA240 Standard : ASTM, ASME and API Thickness : 4.0mm – 100mm, 1 MM TO 200 MM THK IN 1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL., Specialize : Shim Sheet, Perforated Sheet, B. Q. Profile. Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)

Introduction Stainless steel grade 314 has excellent high-temperature resistance characteristics among the chromium-nickel steels series. The silicon content in this material improves oxidation and carburization resistance; however, it can become very brittle when subjected to prolonged temperatures of 649-816°C (1200- 1500°F). Chemical Composition Element Content (%) Iron, fe Balance Chromium, Cr 23-26 Nickel, Ni 19-22 Manganese, Mn 2 Silicon, Si 1.5-3 Carbon, C 0.25 Sulfur,

General Properties Alloy 310 is an austenitic stainless steel that combines excellent high temperature properties with good ductility and weldability. It is typically used for elevated temperature applications as its high chromium and nickel content provide solid corrosion resistance, excellent resistance to oxidation, and superior strength in temperatures up to 2100°F. Due to its high chromium and nickel content, it is superior to 304 or 309 stainless in most environments.

includes 316/316L (UNS S31600 / S31603), in sheet, sheet coil, plate, plate coil, bar, structural and tubular products. Generally, this grade is dual-certified to meet both 316 and 316L. Alloy 316/316L is ideally suited for applications requiring corrosion resistance superior to Type 304 and has good elevated temperature strength. Chemical Composition and Properties Chemical Composition Specification Grade Chemical Composition(wt%) C Mn Ni Cr Mo Ti ASTMJIS 316L/022Cr17Ni12Mo2

316L Stainless Steel Plate DIN1.4404 Metal Plate Laser Cutting and Bending 16 / 316L are austenitic stainless steels that contain molybdenum, which increases their resistance to many chemical corrodents and marine environments. 316L is an extra low carbon version of 316 stainless steel. These materials are more resistant to general corrosion and pitting/crevices than conventional austenitic stainless steels. They also offer higher creep, stress-to-rupture and tensile strength

Strip, Coil, Foil, Wire, ASTM A268, ASTM A240 APPLICATIONS Food processing, brewery and wine making equipment, hot-water tanks, heat-exchanger tubing and automotive components DESCRIPTION Type 444 is a low carbon, low nitrogen, ferritic stainless steel that provides pitting and crevice corrosion resistance superior to most ferritic stainless steels. Applications requiring superior corrosion resistance and resistance to chloride stress corrosion cracking are ideal for this

409L Stainless Steel Plate Stainless 409 ,Grade UNS40900 SUH409L Sheet 2D Finished 409 STAINLESS STEEL If you desire a stainless steel whose mechanical properties highly outshine its physical appearance than 409 stainless steel is your perfect match. 409 Stainless is ideally used in scenarios where a need for oxidation or even corrosion protection is wanted. As a titanium stabilized ferritic stainless steel, 409 is most commonly used in automotive exhaust systems where the

321 STAINLESS STEE This is a standard austenitic 18/8 stainless steel grade, (304), but stabilized by Titanium. The titanium within means the stainless steel is intergranular corrosion resistant after heating, (between 425-900 degrees Celsius). Remarkably high strength as well as scaling resistance and phase stability set 321 Stainless Steel apart from other similar grades. This grade is not, however, recommended for welding consumable, as the titanium component does not

Overview S32760, also called F55 or 1.4501, is a high-alloy super duplex stainless steel, featuring strong strength and corrosion resistance, mainly used in a variety of strong corrosion environments such as chemical processing, petrochemical and submarine equipment. Features of Inox F55 S32760 duplex steel also features strong resistance to chloride corrosion, high thermal conductivity and low coefficient of thermal expansion. Higher chromium, molybdenum and nitrogen content

254SMO Super Stainless Steel Plate UNS S31254 Sheet Smo 254 EquivalentCorrosion Resistance Overview 254SMo is an austenitic stainless steel, developed for use in halide-containing environments such as seawater. The superiority of this steel manifests itself especially in halide-containing acids. 254SMo also features good resistance to uniform corrosion. As its carbon content is less than 0.02%, it is called pure austenitic stainless steel; when its carbon content is less than

General Properties Alloy 825 (UNS N08825) is an austenitic nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. It was developed to provide exceptional resistance to numerous corrosive environments, both oxidizing and reducing. The nickel content of Alloy 825 makes it resistant to chloride stress-corrosion cracking, and combined with molybdenum and copper, provides substantially improved corrosion resistance in reducing environments when compared to

General Properties Alloy 347 (UNS S34700) is columbium stabilized austenitic stainless steel plate with good general corrosion resistance and somewhat better resistance in strong oxidizing conditions than 321 (UNS S32100). It has excellent resistance to intergranular corrosion after exposure to temperatures in the chromium carbide precipitation range of 800 – 1500°F (427 – 816°C). The alloy has good oxidation resistance and creep strength to 1500°F (816°C). It also possesses

904l Stainless Steel Plate 904l Stainless Steel Composition Alloy 904L (N08904) Stainless Steel Product Name: 904L Stainless Steel Sheet We accept all small/large quantity orders. 904L Grade: SUPER AUSTENITIC 904L Sheet/ SS 904L Sheet/ WNR 1.4539 Sheet/ UNS N08904 Sheet/ AISI 904L Sheet/ SUS 904L Sheet/ INOX 904L Sheet/ Alloy 904L Sheet/ URANUS B6 Sheet/ VdTÜV 421 Sheet/ SEW 400 Sheet/ 2RK65 Sheet/ RVS 904L Sheet/ SAE 904L Sheet/ NAS 255 Sheet/ AFNOR Z2 NCDU 25-20 / BS 904S13

S32750 (2507) is a duplex stainless steel that combines many excellent features of ferritic and austenitic steels. Due to its high chromium and molybdenum content, it embodies excellent resistance to pitting corrosion, crevice corrosion and uniform corrosion. The two-phase microstructure ensures that the steel has high resistance to stress corrosion cracking and high mechanical strength. Besides, it features strong resistance to chloride pitting, high thermal conductivity and

s32205 Duplex Stainless Steel Uns S31803 Duplex Uns S31803 SpecificationASTM A240 A480 ASME SA240/SA240M A 789, A 790,UNS S31803, S32205 Duplex steel 2205 /2205 Duplex Overview Duplex 2205 is a nitrogen enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steels. “Duplex” describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430

Stainless Steel Plate A Corrosion Resistant Austenitic Stainless Steel with a High Molybdenum and Nitrogen Content Developed for Use in Chloride Containing Environments. Available thicknesses for Alloy 317LMN: 3/16" 5/16" 3/8" 1/2" 5/8" 3/4" 4.8mm 7.9mm 9.5mm 12.7mm 15.9mm 19mm Alloy 317LMN (UNS S31726) is an austenitic chromium-nickel-molybdenum stainless steel with corrosion resistance superior to 316L and 317L. The higher molybdenum content, combined with an addi

1.Products Description General Description Carlson Alloy 2205 is a second-generation, nitrogen-alloyed duplex stainless steel (ferritic-austenitic). It offers an excellent combination of both strength and corrosion resistance over a wide range of applications. The approximate 50/50 ferrite-austenite structure provides excellent chloride pitting and stress corrosion cracking resistance, with roughly twice the yield strength of the standard austenitic stainless grades. The high