Stainless Steel Round Bar

Hastelloy C276 Bar Hastelloy C276 Nickel Alloy Bar Nickel Alloy C276/ Inconel C276/ Hastelloy C276 (AMS 5750)- Bar Nickel Alloy C-276/Hastelloy® C-276 Bar UNS N10276 Nickel Alloy C-276 and Hastelloy® C-276, commonly known as UNS N10276, is generally considered the most versatile corrosion resistant alloy available, comprised of nickel, molybdenum, chromium, iron and tungsten. These elements combined results outstanding corrosion resistant properties particularly crevice and

1.4545 Stainless Steel Round Bar 15-5PH Polished Round Bar S15500 Forged Round Bar Type 15-5 PH is a martensitic precipitation-hardening stainless steel that provides high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C) and good toughness in both the longitudinal and transverse directions in both base metal and welds. Short-time, low-temperature heat treatments minimize distortion and scaling. Type 15-5 PH is the ferrite

316LVM (UNS S31673) Stainless Steel Round Bar 6-40 mm Heat Treatment Bright Surface Description Item Stainless steel round bar Steel grade 200/300/400 series Standard ASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456, DIN17457,DIN 17459,JIS G3459,JIS G3463,GOST9941,EN10216, BS3605, GB13296 Material 304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L, 316N,201, 316LVM Surface Polishing,annealing,pickling,bright Type hot rolled and cold rolled Delivery time Prompt

Nickel Alloy X-750/ Inconel X-750® Technical Data Sheet Chemical Composition Limits Weight % Ni +(Co) Cr Fe Ti Al Nb + (Ta) Mn Si S Cu C Co X-750 UNS N07750 70 min 14-17 5-9 2.25-2.75 0.40-1.0 0.70-1.2 1 max 0.50 max 0.01 max 0.50 max 0.08 max 1 max UNS N07752 is available in billets for forging. UNS N0772 has limits of 0.05% on both Carbon and Cobalt Alloy X-750 is a nickel-chromium alloy which has been made precipitation-hardenable by the additions of aluminum and titanium.

304F Stainless Steel Round Bar Free Cutting Bright Bar 304F Bright Rod 304F stainless steel bar belongs to the 304 series, the national standard (0Cr18Ni9). Because of its unique cut-off property, it belongs to a special type 304 material, hence the name 304F stainless steel rod. Of course, with the disclosure of technology, many manufacturers have also produced their own brand of 304F stainless steel bar. Not only has it made a stainless steel rod that is easy to cut and

303 Stainless Steel Round Bar Bright Rod Free Cutting SUS303 Stainless Steel Bar General Properties Alloy 303 is a non-magnetic, austenitic stainless steel that is not hardenable by heat treatment. It is the free machining modification of the basic 18% chromium / 8% nickel stainless steel. Alloy 303 was specially designed to exhibit improved machinability while maintaining good mechanical and corrosion resistant properties Due to the presence of sulfur in the steel compositio

Alloy 901 is an age-hardenable super alloy which contains Titanium and Aluminium for precipitation hardening and molybdenum for soild-solution strengthening. Alloy 901 has high yield strength and creep resistance at temperatures to about 1110°F (600°C). As Alloy 901 has a substantial iron content it enables alloy 901 to combine strength with good forging characteristics. Alloy 901 is commonly used for gas turbine engine discs, shafts, rings, casings and seals. Heat Treatment:

Nitronic 60 Stainless Steel Specifications: Nitronic 60/UNS S21800 1. Alloy form: Bar, Sheet, Plate, Tube, Pipe, Wire, Cake, Ring, Flange 2. Provide free inspection and certificate 3. MOQ: 200kg Product specific parameter standard S21800 AMS 5848 ASTM A193 ASTM A194 ASTM A240, ASTM A276 Nitronic 60 Typical Mechanical Properties (Room Temperature) s21800 Nitronic 60 Condition Ultimate Tensile ksi Yield Strength (0.2%) ksi Elongation % in 4D % Reduction of Area s21800 Under 0.5

ASTM AISI UNS S41400 Stainless Steel Rod , 414 Stainless Steel Forged Bar ASTM AISI 414 Round Bar UNS S41400 Stainless Steel Rod DATA SHEET - Alloy Steel - ASTM 414 / UNS S41400 ※ ※ MATERIAL CATEGORY: Martensite type - 13Cr-2Ni AISI Type 414 (UNS S41400) Category Steel Class Stainless steel Type Martensitic standard Common Names Chromium steel Designations United States: AMS 5615 , ASTM A276 , ASTM A314 , ASTM A473 , ASTM A511 , ASTM A580 , FED QQ-S-763 , SAE 51414 , SAE J405

150 mm and 170 mm Round Bars of Grade 1.2787 ESR Equvelant To AISI 431 Hardened And Tempered To 950-1050 C Degree Freq Type 431 Stainless Steel Hardenable Martensitic Stainless Steel Alloy Type 431 is a hardenable martensitic stainless steel alloy which has a combination of high tensile and torsional strength - this makes it well suited to shaft manufacture. The alloy is intended for use in applications requiring good strength and toughness combined with reasonable corrosion

Ground Polished Finish 416 430F 316 310 347 Stainless Steel Rod Product Description Ground Polished Finish 416 Stainless Steel Round Bar/Rod Manufacturer Product Name 416 Stainless Steel Bar and Rod Type Round bar,Angle bar,Channel bar,Square bar,Flat bar,I/H bar,Hexagonal bar and profiles Surface Black,bright,rough turned,centreless Ground etc Standard GB,AISI,ASTM,DIN,EN,SUS,UNS etc Grade 200 series: 201,202,202Cu,204Cu, 300 series: 301,303/Cu,304/L/H,304Cu,305,309/S,310/S

Product AISI 440A 440B 440c Stainless Steel Bar 440C Round Bars 440C Stainless Bar Bright Bar Technique Forged/Hot Rolled/Cold Drawn/Cold Rolled Type Round bar/rod, square bar, flat bar, hexagon bar, angle bar, channel bar, threaded bar Round & Hexagonal Diameter:2~800mm Length:5.8m,6m,or as required. Flat Thick:0.3-200mm Width:1-2500mm Length:2m,5.8m,6m,or as required Square Size:2*2-800*800mm Length:3m,5.8m,6m,or as required Angle Size:4*4*0.5-400*400*20mm Length:3m,5.8m,6m

Hot Rolled ASTM 440c 80mm Stainless Steel Metal Round Rod High Carbon AISI440C Black Bar product information Dia(Ø) 1mm to 400mm Length 1 mtrs to 8 mtrs Standards ASTM a276/479,Astm a182, Sb462, sS166, Sb564, Sb446, Sb408, Sb425, A516, A387, en -24, en8, DIN, JIS, ASME,gb Stainless Steel round bars Grades 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 S33, 316L, 317, 317L, 321, 347, 347H, 409, 410, 410S, 420, 430 Carbon and alloy steel 17-4ph(630gr), En24, En8, Is 2062 gr.

NIckel Inconel X750 Alloy Steel Round Bar UNS N07750 Precipitation-Hardenable Bar Products Description Product Name inconel x750 738lc 725 round bar Standard GB,AISI,ASTM,DIN,EN,SUS,UNS etc Material Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760,2304,LDX2101.LDX2404,LDX4404,904L Others: 153Ma,254SMo,253Ma,654SMo,F15,Invar36,1J22,N4,N6 etc Alloy : Alloy 20/28/31; Hastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N; Haynes: Haynes 230/556/188;

EN10088-3 /X2CrNiMoN25-7-4/DIN 1.4410 Super Duplex Stainless Steel Round Bar 2507 1.4410 /X2CrNiMoN25-7-4 Technical specifications of DIN 1.4410 stainless steel - Chemical composition,mechanical properties from steelmaking,forging,rolling,heat treatment,cold working.We also possess advanced precision machining equipments for further processing ※ DATA SHEET - Alloy Steel - DIN X2CrNiMoN25-7-4 / W-Nr 1.4410 ※ ※ MATERIAL CATEGORY: Common alloy steel - Martensitic and precipitati

GH4145 High Temperature Alloy Round Bar Inconelx-750 /UNS N07750 Forging Ring GH4145 alloy mainly γ "[Ni3 (Al, Ti, Nb)] with aging strengthened nickel-base superalloy, below 980 ℃ with good resistance to corrosion and oxidation resistance below 800 ℃ with high strength, below 540 ℃ has good resistance to relaxation properties, but also has good formability and weldability. the alloy is mainly used in the manufacture of aviation engines work below 800 ℃ and require higher

5Cr15Mov Stainless Steel Round Bar 5cr15mov Knife Steel Material DIN1.4116 X50CrMoV15 5Cr15MoV(GB) - Chinese equivalent of the German X50CrMoV15 steel, one of the most popular kitchen knife steels in mainstream German knives. Sometimes listed it as AISI 440A, but specs are considerably different, especially the Chromium content. Typically gets hardened to 54-56HRC, and the bigger the knife, softer the steel. There is no reason this alloy should be 54-55HRC even in the 8-10

440A 440B SUS440C Stainless Steel Round Bar Cold Drawn Bright Rod product information Item 440A 440B SUS440C Stainless Steel Round Bar Cold Drawn Bright Rod Standard ASTMA276,A479,A582,GB4226-84,GB/T1220-2007,JISG4311-91,JISG4318-98,EN 10095-99,GB4226-84,EN10088-3-2005,JISG4303-2005,etc Round & Hexagonal Dia:2~800mm Length:5.8m,6m,or as required. Flat Thick:0.3-200mm Width:1-2500mm Length:2m,5.8m,6m,or as required Square Size:2*2-800*800mm Length:3m,5.8m,6m,or as required

Aisi 431 Astm 431 Stainless Steel Round Bar For Construction Material Product Description 1.Stainless Steel Main Feature: Stainless steel is a production which not easy rust,acid resistance and corrosion resistance,so it is widely used in light industry,heavy industry,daily necessities and the decoration industry.My company long-term supply stainless steel products including:stainless steel tube&pipe, stainless steel bar, stainless steel plate&sheet, stainless steel wire etc.

Sus 431 1Cr17Ni2 Stainless Steel Round BAR Aisi 431 Rod OD 8 - 250mm For Construction Product Description Key Words stainless steel round bar, black bar , light bar , grinding bar Szie φ 8.0mm- φ 250mm Surface black , hot rolled hydrogen , bright , soft , hard Standard ASTM A313 , ASTM A580 Material 201, 301, 302, 303, 304, 304L, 316, 316L, 321, 309S, 309H, 310, 310S, 2205, 416, 420,,420J2,431, 430 ,665,667,669,904L,2205,2207etc. Length 1-8000mm or According to Request