Steel Round Bar

DIN1.7147 SAE5120 20MnCr5 Annealed Steel Round Bar With Black Grinded Peeled Rough Polished Product Description Forged 20CrMn Alloy Steel Solid Bar 20mncr5 1.7147 Round Steel Bar 1: DIN 1.7147 steel introduction 1.7147 is a European standard carburized steel (surface hardening steel) with high strength toughness and good hardenability. Small quenching deformation, low temperature toughness and good machinability, but low welding performance. It is generally used after

Hot Rolled Alloy 20MnCr5H DIN 1.7147 SAE5120 Alloy Steel Round Bar With Quenched and Tempered Product Description 20MNCr5 DIN1.7147 Alloy steel round bar Round Bars: Dia.10 - 300mm with UT Assurance Flat / Square Bars/Hex Bars:Thickness Max.600mm Shafts, Rollers, Blocks: Customized or According to Drawing 20MnCr5 steel (DIN 1.7147 material) 20MnCr5 steel (1.7147 material) is an European standard carburized steel (case hardening steel) with high strength and toughness and good

20MnCr5H 1.7147 Material SAE5120 Quenched and Tempered Alloy Steel Round Bar Product Description 20MNCr5 DIN1.7147 Alloy steel round bar Round Bars: Dia.10 - 300mm with UT Assurance Flat / Square Bars/Hex Bars:Thickness Max.600mm Shafts, Rollers, Blocks: Customized or According to Drawing 20MnCr5 steel (DIN 1.7147 material) 20MnCr5 steel (1.7147 material) is an European standard carburized steel (case hardening steel) with high strength and toughness and good hardenability.

EN 10084-2008 DIN 1.7131 200mm Alloy Steel Round Bar 16mncr5H Steel SAE 51204 Grade : 16MnCr5 Number: 1.7131 Standard: EN 10084 : 2008 Case hardening steels. Technical delivery conditions EN 10132 - 2 : 2000 Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Case hardening steels Classification: Case hardening steels Equivalent grades: Go here 16MnCr5 EN 10084-1998, Number: 1.7131 Comparison of steel grades JUS Č.4320 DIN 16MnCr 5; ZF 6 BS

S45C Cold Drawn Round Bar SAE1045 Cold Rolled Rod 18.3*2500mm All bars are cleaned by shot blasting before drawing, then pulled through a carbide die, straightened, saw cut to length, oiled, and shipped. Cold drawing results in a product with higher tensile and yield strength, smoother surface finish, and a closer size tolerance. 1.Cold Drawn Steel Bar Processing: EAF + LF + VD + CONCASTING BILLETS + HOT ROLLED + SHOT BLASTING +(ANNEALING) + COLD DRAWN + OILING + BUNDLING +

S45C Cold Drawing Round Bar SGD400-D Polished Bright Round Bar Dia 12MM 16MM * 6000 Cold drawn steel bar is made from special quality hot rolled steel bar. It is drawn through a die reducing the cross-sectional area of the bar and giving it a smooth surface. Shapes: According to the shapes of the die, the finished product can get a round, hexagonal, square, flat and other cross section. Advantage: Cold drawn bars have greater size accuracy, straightness and increased tensile

Steel Round Bar 31CrMoV09 Q+T 1.8519 Alloy Rod 30-500mm Hot Rolled and Forged Nitriding Steel Rod Main Grade we can supply for forged steel bars Steel series Representative steel type Carbon Steel series AISI 1020,1045,A36,S355JR,S355JO Petroleum machinery series AISI4150,AISI4140,AISI4130, 30CrMo,4145H Tool mold series 1.2714,5CrMnMo,5CrNiMoV, 1.2738,1.2311,1.2312 1.2714 H13 Bearing series 52100,GCr15,SUJ2 Marine series 4140,42CrMo,SCM440, 709M40 Car series SAE8620,20CrNiMo,

Hot Rolled Round Bar 40cr JIS SCr440 DIN 1.7035 Alloy Structure Steel Forged Steel Soild Bar 40Cr hot rolled steel round bars Chemical and Mechanical Chemical composition C(％) 0.37～0.44 Si(％) 0.17～0.37 Mn(％) 0.50～0.80 P(％) ≤0.030 S(％) ≤0.030 Cr(％) 0.80～1.10 Mechanical Properties The mechanical properties of annealed GB 40CR alloy steel are outlined in the table below Tensile Yield Bulk modulus Shear modulus Poisson’s ratio Izod Impact KSI KSI KSI KSI ft.lb 76900 55800 20300

42CrMo Hot Rolled Forged Round Bar OD 460mm 42CrMo4 DIN1.7225 Quenching and Tempering Heatment Product Description 1020 1045 4140 4340 8620 Carbon Alloy Steel Round Bar our steel round bar and plate to many different counties every month, such as Malaysia, Singapro, Vietnam, India, Korea, Indonesia, Australia, Ireland, Italy, Greece, Israel, Dubai, Saudi Arabia, Mexco, Colombia, Argentina, Peru, South Africa... 1: Main Product: GB GB/T 1299 JIS JIS G4404 DIN (W-Nr.) DIN EN

Cold Drawn Hexagonal Bar Material S45C SAE1045 Hexagonal Steel Bar S17 Length 3M Product Description SAE1020 SAE1045 S20C S45C A36 cold drawn hexagonal steel bar AISI 1008 1018 Cold drawn steel round bar, square bar, hexagonal steel bars SAE 1020 1045 Cold drawn carbon steel bars. Supplier of high quality cold drawn steel bars from Sizes 5mm to 120mm 1.Cold Drawn Steel Bar Processing: EAF + LF + VD + CONCASTING BILLETS + HOT ROLLED + SHOT BLASTING +(ANNEALING) + COLD DRAWN +

SAE 4340 Alloy Steel Round Bar Dia 300mm Length 3000mm DIN 1013 Oil Quenched and Tempered SAE AISI 4340 Steel (UNS G43400) AISI 4340 steel (UNS G43400) is an ultra-high strength medium carbon low alloy steel, which combines deep hardenability, high ductility, toughness and strength, and has high fatigue resistance and creep resistance. It is not particularly affected by tempering and embrittlement, and exhibits good strength retention at high temperatures and is not easily

Hot Rolled CS Round Bar 20 MM X 6000 MM Grade S355 JR S355J2 EN 10084 : 2008 S355J2 is carbon manganese, high yield non alloy steel. It is called S355 because of the average minimum yield for this material is 355 Mpa. S355J2 1.0577 Carbon Steel Rod has excellent strength and weldability. It can be easily welded to other weldable steel. Due to its low carbon equivalent EN 10250 S355j2 Structural Steel Square Bar it provides good cold-forming properties and it is generally

Steel Round Bar 40Cr 80mm Length 6M SCr440 ASTM 5140 Alloy Round Rod 40Cr hot rolled steel round bars information 40Cr alloy structural steel has higher tensile strength, yield strength and hardenability than No. 40 steel, but its weldability is limited and there is a tendency to form cracks. 40Cr is a medium carbon modulated steel, cold heading die steel. The steel is moderately priced and easy to process. After proper heat treatment, certain toughness, plasticity and wear

Nitriding Steel Round Bar D 470 mm Material 1.8519 31CrMoV9 QT Forged Steel Soild Rod Detail Page Product Name 31CrNoV9 33CrMoV12-9 34CrAlNi7-10 41CrAlMo7-10 1.8519 1.8522 1.8550 1.8509 alloy steel bar/rod Material 31CrNoV9 33CrMoV12-9 34CrAlNi7-10 41CrAlMo7-10 1.8519 1.8522 1.8550 1.8509 Standard AISI,ASTM,GB,DIN,EN,BS,JIS Technique Hot rolled,cold rolled Surface No.1,2B,BA Diameter 3-480mm or as required Length 3000mm,4000mm,5800mm,6000mm,12000mm or as required Tolerance ±5

16MnCr5,16MnCr5 Chemical composition,16MnCr5 steel grades,if you need EN 10084 : 2008 Case hardening steels. Technical delivery conditions ,please contact us. Grade : 16MnCr5 Number: 1.7131 Standard: EN 10084 : 2008 Case hardening steels. Technical delivery conditions EN 10132 - 2 : 2000 Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Case hardening steels Classification: Case hardening steels Equivalent grades: Go here 16MnCr5 EN 10084-1998,

40Cr Steel Specification Φ20x2500mm Cold Drawn Alloy Steel 1.7035/1.7045 For CNC PRECISION AUTOMATIC General Information Product Name Grinding Rods HS Code 72283090 Size Range Length: 1000-6000mm, Diameter: 30-200mm Specification 45#, 50Mn, 60Mn, 65Mn, B2, B3, B4, B6, BL, BG Surface Hardness 45-60HRC Impact Value ≥12J/cm2 Dropping Test 10,000-20,000 times Packaging Bundles, Bags, Steel drums, Containers Size Diameter (mm) Length (mm) 30-200 1000-6000 Chemical Composition (%)

42CrMo Steel Specification Φ16x2500mm Cold Drawn Alloy Steel 42CrMo4 Normalized Quenched 1: AISI 4140 steel introduction AISI 4140 is defined as a low alloy steel which has 1% Cr-Mo as strengthening alloy elements.Compared with AISI 4130, it has a higher carbon content with good balance of strength, toughness ,abrasion and impact resistance and heat treatment capabilities,but poor in weldability characteristics.AISI 4140 is generally supplied in quenched and tempered

DIN 1.7131 AISI 5115 Eqivalent Material Alloy Steel 16MnCr5 Steel Round Bar Used For Bearing 16mncr5 1.7131 5115 alloy steel bar 1: 16MnCr5 steel introduction 16MnCr5 steel are alloyed case hardening engineering steels for parts which require core tensile strength of 800 - 1100 N/mm² and good wearing resistance. It is an engineering material typically used to manufacture piston bolts, camshafts, levers and other vehicle and mechanical engineering components. 2: 16MnCr5 Steel

Product Description 18CrNiMo7-6 18CrNiMo7 18NCD6 1.6587 820A16 Forged Steel Round Square bar UT Tested 1.18CrNiMo7-6 18CrNiMo7 18NCD6 1.6587 820A16 forged steel bar sizes we can offer; Round bar: 200-1000mm Square bar:150×150-600×600mm 2.Supply condition for 18CrNiMo7-6 18CrNiMo7 18NCD6 1.6587 820A16 Forged steel bars: Black /Rough Machined /Rough turned 3.Futhur heat treatment for 18CrNiMo7-6 18CrNiMo7 18NCD6 1.6587 820A16 forged steel : Normalized Annealed Q&T(Quenched

Alloy Material Grade 34crnimo6 DIN1.6582 EN 10083 -3 34crnimo6 Alloy Steel Bar 34crnimo6 Astm 34CrNiMo6 hot rolled steel round bars Application EN DIN 34CrNiMo6 steel is used to make tools which demands good plasticity and high strength. It is usually selected to make the big size and important parts, such as heavy machinery axle,turbine shaft blade, high load of transmission parts, fasteners, crank shafts, gears, as well as heavily loaded parts for motor construction etc.