Steel Round Bar

16MnCr5 Steel Round Bar Hot Rolled Alloy Bar EN10084 DIN 1.7131 Special Alloy RodGrade :16MnCr5Number:1.7131Classification:Alloy special steelStandard:EN 10084: 2008 Case hardening steels. Technical delivery conditionsEN 10132-2: 2000 Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Case hardening steelsEN 10263-3: 2001 Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for case hardening steelsEN 10297

SAE8620H Alloy Round Bar SAE 8620 Alloy Steel Round Bar | UNS G86200 Bar SAE8620H Alloy Solid Round Bar SAE 8620 is one of alloy construture steel according to Chinese Standard. Standard Code: A50202. The steel round bar is high hardenability, without fragility after tempering,good weldability.Nice machinability and Cold strain plasticity. HR 8620 steel bar is a low carbon nickel chromium molybdenum alloy with good carburized properties, formability, and weldability. This

ASTM SAE4340 90mm Dia Alloy Round Bar SNCM439/40CrNiMoa Alloy Round Steel Bar SNCM439/4340/40CrNiMo Round Steel Bar SNCM439/4340/40CrNiMo Round Steel Bar SNCM439/4340/40CrNiMo Round Steel Bar SNCM439/4340/40CrNiMo Round Steel Bar grade SNCM439/4340/40CrNiMo application widely used in the areas as ss fasteners , chains , kitchen and sanitary wares , furniture handles , handrails , electroplating and electrolyzing pendants , foods, electron , petroleum , construction and

SAE4340 GB 40CrNiMoA EN 10028-3 Alloy Steel Round Bar OD 300mm DIN 1.6511 Alloy Forged Rod 1.Supply Form & Size & Tolerance Supply Form Size(mm) Process Tolerance Round Φ6-Φ100 Cold Drawn Bright/Black Best H11 Φ16-Φ350 Hot Rolled Black -0/+1mm Peeled/ground Best H11 Φ90-Φ1000 Hot Forged Black -0/+5mm Rough Turned -0/+3mm Flat/Square/Block Thickness :120-800 Hot Forged Black -0/+8mm Width:120-1500 Rough Machined -0/+3mm Remark:Tolerance can be customized as per requests 2

Product Introduction 4340 alloy steel bar is used heavily in the aerospace industry due to its ultra-high strength. When heat treated it is known for its toughness while preserving good fatigue strength. For highly stressed parts it is excellent choice. It can be machined by all customary methods. This material is available in both vacuum melt (VM) and air melt (AM) 4340 is a very high strength steel alloy which is hardened and tempered before supplying and has nickel,

ASTM SAE4340 Alloy Steel Round Bar Annealed +Quenched SNCM439 Forged Round Rod AISI/ASTM 4340 Alloy Steel Round Bar SAE AISI 4340 Steel Properties, Heat Treatment SAE4340 Alloy Steel 40CrMnNiMo8-4 is another alloy which displays superior mechanical properties. This material is available in the Annealed or Quenched and Tempered conditions. 4340 is used many industries including oil and gas exploration, gear manufactring etc. Comparable Standards: AISI/SAE DIN W.Nr. AFNOR JIS

SAE8620H Alloy Round Bar SAE 8620 Alloy Steel Round Bar | UNS G86200 Bar SAE8620H Alloy Solid Round Bar SAE 8620 is one of alloy construture steel according to Chinese Standard. Standard Code: A50202. The steel round bar is high hardenability, without fragility after tempering,good weldability.Nice machinability and Cold strain plasticity. HR 8620 steel bar is a low carbon nickel chromium molybdenum alloy with good carburized properties, formability, and weldability. This

SAE1045 S45C SAE1020 Cold Drawn Steel Round Rod Carbon Steel Bar 18.3*2500mm All bars are cleaned by shot blasting before drawing, then pulled through a carbide die, straightened, saw cut to length, oiled, and shipped. Cold drawing results in a product with higher tensile and yield strength, smoother surface finish, and a closer size tolerance. 1.Cold Drawn Steel Bar Processing: EAF + LF + VD + CONCASTING BILLETS + HOT ROLLED + SHOT BLASTING +(ANNEALING) + COLD DRAWN + OILING

1.EN Steel 34CrNiMo6 Supply Range Round Steel Bar Sizes: diameter 10mm – 3000mm Steel Flat and Plate: 10mm-1500mm thickness x 200-3000mm width Other steel shape and sizes available according to your requirements. Surface finish: Black, machined, peeled, turned or according to other customers’ pecial requirements. RFQ OF 34CRNIMO6 STEEL 2.EN 34CrNiMo6 Steel Standards And Equivalents BS EN 10083 -3: 2006 34CrNiMo6 / 1.6582 ASTM A29: 2004 4337 BS EN 10250 – 3: 2000 3. EN/DIN

Product Description 1.[ Structural steel 17CrNiMo6 1.6587 bar& rod] Introduction: Heat treated : 1386°C - 1317°C Yield Rp0.2 (MPa) Tensile Rm (MPa) Impact KV/Ku (J) Elongation A (%) Reduction in cross section on fracture Z (%) As-Heat-Treated Condition Brinell hardness (HBW) 157 (≥) 187 (≥) 22 24 44 Solution and Aging, Annealing, Ausaging, Q+T,etc 443 Temperature (°C) Modulus of elasticity (GPa) Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal

Useful information of SAE 1045 Carbon Steel Flat Bar SAE 1045 Carbon Steel Flat Bar Chemical Composition Chemical composition %: C Si Mn S P Cr Ni Cu 0.27-0.34 0.17-0.37 0.70-1.00 ≤0.035 ≤0.035 ≤0.25 ≤0.30 ≤0.25 SAE 1045 Carbon Steel Flat Bar Mechanical Properties mechanical properties: Tensile strength σb (Mpa) Yield strength σb (Mpa) Elongation σb (%) reduction of area ψ (%) Hardness No heat treatment Impacting Energy Akv (J) Notched bar impact strength αkv (J/cm2) min min

Cold Drawn SAE1020 Round Bar ASTM A36 Cold Drawn Bright Round Bar 1045 quenched & tempered qt steel bar 1045 is a medium carbon steel for mechanical engineering and automotive components manufacturing. It can get high strength and high hardness after quenched and tempering. The similar material includes C43, C44, C45E, CK45, SAE1045, 080A42, S45C ETC. Quenching and Tempering, abbreviated as Q&T is a king of processing that strengthen or harden steel bars by heating the

Gcr15 Steel Round Bar SAE52100 Bearing Steel Bar EN 100Cr6 DIN 1.2067 GB/T 18254 GCr15 stainless steel belongs to bearing stell. Among various bearing steel, GCr15 has high cost performance. So GB/T 18254 GCr15 is widely used in the industrial field. GB/T 18254 GCr15 stainless steel can be produced into hot rolled round bars and square bars, cold-drawing bars,forged bars. We henan bebon can supply GB/T 18254 GCr15 all of shapes. Based on GB/T 18254 GCr15 stainless steel

AISI 8620 Steel is a low alloy nickel, chromium, molybdenum case hardening steel, generally supplied in the as rolled condition with a maximum hardness HB 255max. SAE steel 8620 offers high external strength and good internal strength, making it highly wear resistant. AISI 8620 steel has a higher core strength than grades 8615 and 8617. SAE 8620 alloy steel is flexible during hardening treatments, thus enabling improvement of case/core properties. Pre hardened and tempered

60Si2MnA Alloy Steel Round Bar 60Si2Mn Spring Steel Metal Material Solid Steel Rod GB 60SI2MN Spring steel stockholders and China suppliers. Otai Special Steel have more 16 years experience in GB 60SI2MN Spring Steel round bar, flat bar., rod bar, wire and plate supply.GB 60SI2MN Steel is a high quality Alloy Spring Steel, It belong to the high quality high carbon alloy Spring Steel. Quenched & Tempered Hardness is 28-34 HRc. 60SI2MN steel Annealing delivery hardenss less

38CrMoAl En41B Hot Rolled Steel Bar JIS SACM645 DIN 41CrAlMo7/ 34CrAlMo5 Products Name: Mould Steel MITTEL Steel Deals in different types of our advantage products include mould steel and Minerals & Metallurgy products. Similar Grade GB AISI DIN JIS EN TOCT ISO BS UNS 38CrMoAl 41CrAlMo7/ 34CrAlMo5 SACM645 38X2MЮA(38XMЮA) 41CrAlMo74 905M39/ 905M31 Chemical Composition C Si Mn P S Cr Mo Al 0.35-0.42% 0.20-0.45% 0.30-0.60% ≤0.035% ≤0.035% 1.35-1.65% 0.15-0.25% 0.70-1.10%

Gcr15 Alloy Steel Round Bar Bearing Steel Bar AISI 52100 DIN100Cr6 Quenching and Temperature GB GCr15 Bearing Steel MITTEL STEEL is GCr15 bearing steel stockholders and suppliers from china. more 16 years experience in GB GCr15 steel round bar, plate, flat bar, square, pipe/ tube supply. GB GCr15 bearing steel is GB standard Alloy Bearing steel, It belong to the high quality high carbon, alloy chromium,manganese steel. GB GCr15 properties is a chromium,manganese alloy steel

AISI 8620 Steel is a low alloy nickel, chromium, molybdenum case hardening steel, generally supplied in the as rolled condition with a maximum hardness HB 255max. SAE steel 8620 offers high external strength and good internal strength, making it highly wear resistant. AISI 8620 steel has a higher core strength than grades 8615 and 8617. SAE 8620 alloy steel is flexible during hardening treatments, thus enabling improvement of case/core properties. Pre hardened and tempered

40CrNiMoA SNCM439 Alloy Steel Round Bar Black Surface 160mm Alloy Steel Rod Forged steel round bar Grade: 40NiCrMoA Similar grade: 40NiCrMo8, 817M40, 4340 Chemical compostion: C: 0.37/0.44; Si: 0.15-0.35; Mn: 0.50/0.80; P: Max 0.025; S: Max 0.035 Cr: 0.60/0.90; Mo: 0.20/0.35; Ni: 1.60/1.90; Standard: UNI 7845: 1978 Temperature: Hot forging 1100-900 Soft Annealing: HB Max 250 Delivery state: Hot forged +Normalizing/Annealing+Rough Turned+ Quenching+ Tempering, . Or Only forged

16MnCr5,16MnCr5 Chemical composition,16MnCr5 steel grades,if you need EN 10084 : 2008 Case hardening steels. Technical delivery conditions ,please contact us. Grade : 16MnCr5 Number: 1.7131 Standard: EN 10084 : 2008 Case hardening steels. Technical delivery conditions EN 10132 - 2 : 2000 Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Case hardening steels Classification: Case hardening steels Equivalent grades: Go here 16MnCr5 EN 10084-1998,