Elevator Safety Components

Oil Buffer With Spring for Elevator Safety Components , Speed 2.0 m/s , SN-YHC6-275 Lift Oil Buffer With Spring Elevator Safety Parts 275 Mm Plunger Stroke Advanced technology, Simple structure The buffering curve is steady and continuous Average negative acceleration under heavy load The piston is chrome-plated to protect the buffer from rusting Withstand the salt spray test for 48 hours Part NO. Stroke (mm) Free hight (mm) Rated speed (m/s) Load (Kg) SN-YHC6/275 275 810 ≤2

Elevator Oil Buffer Elevator Safety Component With ≤1.0m/S Rated Speed The SN-LHB 100E oil buffer elevator safety component is engineered for elevators with rated speeds up to 1.0 m/s, providing reliable safety protection through advanced hydraulic damping technology. Product Features Solid structural design and precise engineering manufacturing for extended service life Low maintenance cost and reliable performance Rapid activation during elevator control loss situations

Lift Tension Device Elevator Safety Components With 6/8mm Rope Diameter Product Overview The SN-LTD07 lift tension device elevator safety component is a high-performance safety device designed specifically for elevator systems. It ensures operational stability by monitoring and adjusting wire rope tension in real time. Key Features Real-time monitoring and adjustment of wire rope tension Core components include mounting frame, support frame, tensioning assembly, and spring

Galvanized Elevator Wire Rope – 8x19S, 10mm–16mm, Bright/Uncoated, High-Breaking Load, ISO 4344, For Traction & Suspension Use Galvanized Elevator Wire Rope - 8x19S, 10mm-16mm, Bright/Uncoated, High-Breaking Load, ISO 4344, for Traction & Suspension Use Product Features Construction Characteristics: Adopts Ultra-High Molecular Weight Polymer Core (CGSF), pre-formed, bright (uncoated) surface, right-hand lay, ordinary (regular) lay. Application: Designed for traction use in

Elevator Polyurethane Buffer – High-Capacity Shock Absorber, Durable Elastomer, OEM Sizes Available for Safe End-Stop Protection The Elevator Polyurethane Buffer is a critical safety component designed for modern elevator systems. Engineered from high-grade polyurethane elastomer, this buffer provides reliable shock absorption during emergency stops or end‑travel overrun situations. Its advanced material composition delivers exceptional energy return, high load‑bearing

Hydraulic Oil Buffer for High-Speed Elevators, Carbon Steel/Stainless Steel, 150mm–600mm Stroke, Red/Yellow, CE/ISO, Crash Protection & Noise Reduction Introduction The elevator oil buffer is one of the most critical safety components in any vertical transportation system. Installed at the bottom of the elevator hoistway, this hydraulic device serves as the final line of defense against uncontrolled car or counterweight descent beyond the normal travel limits. When an

≤0.63 M/S Rated Speed Electronic Safety Gear For Elevator Lift Parts Parameter Value Allowable total permit system quality ≤1250kg Rated speed ≤0.63m/s Matching guide rail 10mm Operation mode Power-failure operation Executive standard Commissioned certification FAQ 1. Are the elevator wire ropes durable? The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a

1.0~1.75m/S Speed And φ200mm Sheave Diameter Elevator Governor Lift Safety Devices Covered specifications(Rated speed): 1.0m/s; 1.5~1.6m/s; 1.75 m/s Sheave diameter: φ200mm Wire rope diameter: standard φ6 mm Pulling force: ≥500N Tension device: Standard OX-200 Work location: Car side/counterweight side Uplink control: Drive main engine brake Downward control: safety gear FAQ 1. Are the elevator wire ropes durable? The elevator wire rope has special provisions and requirements

150~200N Early Warning Liting Force Safety Linkage Device Elevator Spares Mating safety gear: OX-210B,OX-088 Pulling form: solely pulling T echnical condition: rail guide top distance DBG≥650mm (UKS switch applicable) Advised pretension pulling force 1 50N-200N(depending on the actual needs) Parameter Unit SN-OX-210BT Installaion mode Installation ofcarvertical beamwithknapsackframe structure Pulling form Single pulling Matching safety gear OX-210B/OX-088 Early warning liting

≤2800kg P+Q Elevator Spares Safety Gear With ≤ 2.5m/S Lift Rated Speed Product Model Parameters Parameter Value Total lift weight (P+Q) (kg) ≤ 2800 Applicable lift rated speed (m/s) ≤ 2.5 Applicable guide rail types T-8K, T-13K, T-18K Suggested setting range for pull force required for safety gear action (N) 200–300 FAQ 1. Are the elevator wire ropes durable? The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load

Elevator overspeed governor for MR elevators (0.25-2.5m/s). Features 240mm sheave, 8mm rope diameter, 1000-2000N tension force. Works with one-way safety gear, AC220V/DC110V options. Certified with ISO9001/CCC/CE.

ISO9001-certified φ200mm cast iron elevator tension device. Durable, efficient, with 12-month warranty. Custom installation for pit or guide rail mounting.

150-200N Safety Linkage Device ensures elevator safety by preventing car movement unless all doors are closed and locked. Features double-pull mechanism, lower beam installation, and failsafe design that interrupts power if doors open or car isn't level.

LHB 100E oil buffer for elevators with 600-4600kg P+Q capacity and ≤1.0m/s speed. GB certified, durable design ensures passenger safety through rapid hydraulic deceleration during emergencies. One-year warranty.

0.25~0.63m/S Speed Super Heavy-Duty Elevator Safety Gear Industrial Lift Safety Clamp Type Rated speed(m/s) Tripping speed(m/s) P+Q(kg) Rail width(mm) A B C Certifications SN-SG-L16 0.25~0.63 0.29~0.8 ≤58000 31.75 604 534 347 GB SN-SG-L16A 0.25~0.63 0.29~0.8 ≤75000 31.75 730 670 391 GB FAQ Are the elevator wire ropes durable? The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of

Elevator Accessories Safety Brake Device 0.25~2.5m/S Rated Speed Safety brake device SN-SG- AK01ZA Type V(m/s) Rated speed (P+Q)1(kg) Allowable gross mass (mm) Width of guide rails (mm) Distance of the guide rail SN-SG- AK01ZA 0.25-2.50 1000-2800 10,16 960-2100 Recommend using guide shoe (N) Pressure on the front surface of guide rail (N) Pressure on the side surface of guide rail ( The optional guide shoe please see guide shoe section) DK2 ≤1000 ≤650 FAQ Are the elevator

≤1.75m/S Lift Safety Devices Elevator Buffer Suitable For Heavy-Duty Elevators Advanced spin-forming process High strength and lightweight characteristics G1 series can absorb stronger impact energy Suitable for heavy-duty elevators Parameter Table Product Series Product Model Rated Speed (m/s) Permitted P+Q (kg) Buffer stroke (mm) Free Height A Height Dimension (mm) Mounting Dimension (mm) Certification G 0 Series Buffer SN-HYF30GO ≤0.63 600-3500 30 126 90*90 4-Φ14 GB/CE SN

150mm Sheave Diameter Home Elevator Speed Governor For Lift Safety Devices Product Features Type Rated speed V(m/s) Rope tension force(N) Rope Dia.(mm) Sheave pitch Dia.(mm) SN-SG-XS150A/B/C ≤0.4 ≥600 Φ6 Φ150 FAQ Are the elevator wire ropes durable? The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than

≤0.63m/S Rated Speed Home Elevator Oil Buffer For Lift Safety Devices Type V(m/s)Rated speed (kg)Allowable gross mass H1 (mm)Stroke H(mm)Free height (L)Oil mass HY30 ≤0.63 500-1500 30 160 / L-HM68/0.1 FAQ 1. Are the elevator wire ropes durable? The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the

2.0,2.5m/s Speed Elevator Spares Elevator Overspeed Governor With Machine Room Product Features Rated speed V(m/s) Rope tension force(N) Rope Dia.(mm) Sheave pitch Dia.(mm) 2.0,2.5 700-1500 Φ8 Φ300 Tension device Lifting height H(m) Tensioning force(N) XS300Z.2A ≤120 480 XS300Z.2B 120