Nicr Alloy

0.025mm, Karma, NiCr20AlSi, ISAohm 80, Presicion Resisitance alloy Round Wire / Ribbon Karma alloy is made up of copper, nickel, Aluminum and Iron as the main components. The resistivity is 2~3 times higher than MENTONG. It has lower temperature coefficient of resistance(TCR), lower thermal EMF versus copper, good permanence of resistance for a long period of time and strong anti-oxidation. Its working temperature range is wider than MENTONG (-60~300℃). It is suitable for

0.09x110mm, Karma, NiCr20AlSi, presicion Resisitance alloy Strip / Tape / Belt Karma alloy is made up of copper, nickel, Aluminum and Iron as the main components. The resistivity is 2~3 times higher than MENTONG. It has lower temperature coefficient of resistance(TCR), lower thermal EMF versus copper, good permanence of resistance for a long period of time and strong anti-oxidation. Its working temperature range is wider than MENTONG (-60~300℃). It is suitable for making fine

3*30mm 50x2mm Nichrome Strip Ni80cr20 NiCrC Ni60Cr15 Ni60Cr20 NiCr60/15 NiCr60/20 for Electric Heating Element Resistance Wire made of Nickel Chrome Alloys, Nickel Chrome Iron Alloys, Iron Chrome Aluminium Alloys, Copper Nickel Alloys. Mainly used in heater, heating element and resistor, etc. NiCr 80/20, NiCr 70/30, NiCr 60/15, NiCr 35/20 CrAl 15-5, CrAl 20-5, CrAl 25-5, etc... Constantan, Alloy 30, Alloy 60, Alloy 90, etc. Electric Resistivity from 0.02 u ohm/m-1.53 u ohm/m

72x0.5mm 140x0.5mm Nichrome Resistance Heating Alloy Ni80cr20 Wire / Strip MWS-650/ 675 /800 Product Description Grade: Ni80Cr20 ,also called Nikrothal 8,MWS-650,NiCrA,Tophet A,HAI-NiCr 80,Chromel A,Alloy A,N8,Resistohm 80, Stablohm 650,Nichorme V,Nikrothal 80 etc. Chemical Content(%) C P S Mn Si Cr Ni Al Fe Other Max 0.03 0.02 0.015 0.60 0.75~1.60 20.0~23.0 Bal. Max 0.50 Max 1.0 - Mechanical Properties of nichrome wire Max Continuous Service Temperature: 1200ºC Resisivity 20

Ni80 NiCrA NiCrAA Industrial Furnace Nichrome 80 20 Heating Strip (2.0mm*20mm) Ni80Cr20 is a nickel-chromium alloy (NiCr alloy) characterized by high resistivity, good oxidation resistance and very good form stability. It is suitable for use at temperatures up to 1200°C,and hold a superior service life compared to Iron chromium alumium alloys. Typical applications for Ni80Cr20 are electric heating elements in home appliances,industrial furnaces and resistors(wirewound

(ni80cr20/ni70cr30/ni60cr15/ni35cr20/ni20cr25/ ni30cr20) Nickel Chrome Resistance Heating Strip for Electric Heating Element 1.Nickel chrome wire Strip Bar includes: Cr25Ni20,Cr20Ni35,Cr15Ni60,Cr20Ni80 etc. 2.FeCrAl wire strip includes: OCr13Al4,OCr19Al3,OCr21Al4,OCr20Al5,OCr25Al5,OCr21Al6,OCr21Al6Nb,OCr27Al7Mo2. 3.Copper Nickel wire Strip includes: CuNi1,CuNi2,CuNi5,CuNi8,CuNi10,CuNi14,CuNi19,CuNi23,CuNi30,CuNi34,CuNi44. 4.Constantan Strip includes: CuNi44 CuNi45 CuNi40. 5

Cu-Ni Alloy Ribbon ISO-TAN, 2.0842 CuNi44 CuNi40 Flat Resistance Ribbon Wire 3.0x0.26mm Introduction sometimes cupro-nickels, there exists a range of different cooper nickel alloys that possess different properties and hence are suited to a range of different applications. 1. CE and ROHS cerfication; 2. Small orders are accepted; 3. Factory direct sale; 4. Timely delivery; 5. Samples are available; Features 1. Good resistance to corrosion; 2. Good malleability performance; 3.

nickel chromium resistance alloy Ni80Cr20 Ni70Cr30 Ni60Cr15 Ni35Cr20 Ni30Cr20 nicr flat wire and strip Common Name: Ni60Cr15, Chromel C, Nikrothal 60, N6, HAI-NiCr 60, Tophet C, Resistohm 60, Cronifer II, Nichrome, Alloy C, Alloy 675, Nikrothal 6, MWS-675, Stablohm 675, NiCrC Ni60Cr15, is a nickel-chromium alloy (NiCr alloy) characterized by high resistivity, good oxidation resistance ,good form stability and good ductility and excellent weldability. It is suitable for use at

nickel chromium resistance alloy Ni80Cr20 Ni70Cr30 Ni60Cr15 Ni35Cr20 Ni30Cr20 nicr flat wire and strip NiCr 80/20 :Chromel A, Nikrothal 80, N8, Nichrome V, HAI-NiCr 80, Tophet A, Resistohm 80, Cronix 80, Protoloy, Nikrothal 8, Alloy A, MWS-650, Stablohm 650 1--Product Description The nichrome resistance wire resistivity is steady, the temperature coefficient is small, the inoxidizability is good, the service life is long, the reasonable price and so on a series of merits, are

0.6x0.2mm 0.5X0.1mm Bright nichrome Ribbon Ni80cr20 NiCr 80/20 NiCr60/15 NiCr70/30 Flat Wire NiCr 80/20 :Chromel A, Nikrothal 80, N8, Nichrome V, HAI-NiCr 80, Tophet A, Resistohm 80, Cronix 80, Protoloy, Nikrothal 8, Alloy A, MWS-650, Stablohm 650 Product Description Ni80Cr20 is a nickel-chromium alloy (NiCr alloy) characterized by high resistivity, good oxidation resistance and very good form stability. It is suitable for use at temperatures up to 1200°C,and hold a superior

Copper Nickel Alloy Foil Constantan Strip/CuNi40 Tape/ CuNi44 Alloy foil 0.05x300mm Constantan Product Details: Grade: 6J40 also known as cuni40 Nature: With 40% nickel, 1.5% copper manganese alloy Constantan is a type of resistance alloy, which is made up of copper and nickel as the main components. It has a low temperature coefficient of resistance (TCR), and a wide operating temperature range (below 500°C). It has good properities on mechanical working, high resistance of

0.05x200mm CuNi40Mn1.5 Copper nickel alloy CuNi40 constantan heating tape / strip / foil / coil constantan Product Details: Grade: 6J40 also known as cuni40 Nature: With 40% nickel, 1.5% copper manganese alloy Constantan is a type of resistance alloy, which is made up of copper and nickel as the main components. It has a low temperature coefficient of resistance (TCR), and a wide operating temperature range (below 500°C). It has good properities on mechanical working, high

0.02x100mm Copper Alloy Resistance Constantan Flat Strip and foil CuNi40 Chemical Content, % Ni Mn Fe Si Cu Other ROHS Directive Cd Pb Hg Cr 40 1.5 - - Bal - ND ND ND ND Mechanical Properties Max Continuous Service Temp 500℃ Resisivity at 20℃ 0.48±5%ohm mm2/m Density 8.88 g/cm3 Thermal Conductivity 20℃,W/(m. ℃) 22.9 Melting Point 1280℃ Tensile Strength,N/mm2 Annealed,Soft 390 Mpa Tensile Strength,N/mm3 Cold Rolled 685~980 Mpa Elongation(anneal) 15%(Min) Elongation(cold rolled

electrical resistivity CuNi constantan Constan CuNi44 / Cu56Ni44 / CuNi44Mn1 Strip / foil 0.05*200mm Chemical Content, % Ni Mn Fe Si Cu Other ROHS Directive Cd Pb Hg Cr 44 1% - - Bal - ND ND ND ND Mechanical Properties Max Continuous Service Temp 400℃ Resisivity at 20℃ 0.49±5%ohm mm2/m Density 8.9 g/cm3 Thermal Conductivity -6(Max) Melting Point 1280℃ Tensile Strength,N/mm2 Annealed,Soft 340~535 Mpa Tensile Strength,N/mm2 Cold Rolled 680~1070 Mpa Elongation(anneal) 25%(Min)

Stable Resistance Copper Nickel Alloys CuNi44 NC050 Eureka Resistance Strip / Foil 0.02x100mm​ Chemical Content, % Ni Mn Fe Si Cu Other ROHS Directive Cd Pb Hg Cr 44 1% - - Bal - ND ND ND ND Mechanical Properties Max Continuous Service Temp 400℃ Resisivity at 20℃ 0.49±5%ohm mm2/m Density 8.9 g/cm3 Thermal Conductivity -6(Max) Melting Point 1280℃ Tensile Strength,N/mm2 Annealed,Soft 340~535 Mpa Tensile Strength,N/mm2 Cold Rolled 680~1070 Mpa Elongation(anneal) 25%(Min)

Heating resistance alloy electric flat ribbon wire ni80 cr20 nichrome 80/20 ribbon wire NiCr 80/20 :Chromel A, Nikrothal 80, N8, Nichrome V, HAI-NiCr 80, Tophet A, Resistohm 80, Cronix 80, Protoloy, Nikrothal 8, Alloy A, MWS-650, Stablohm 650 1--Product Description The nichrome resistance wire resistivity is steady, the temperature coefficient is small, the inoxidizability is good, the service life is long, the reasonable price and so on a series of merits, are the industry

NiCr 80/20 nichrome Ribbon Ni80cr20 Flat Wire 0.5X0.1mm NiCr 80/20 :Chromel A, Nikrothal 80, N8, Nichrome V, HAI-NiCr 80, Tophet A, Resistohm 80, Cronix 80, Protoloy, Nikrothal 8, Alloy A, MWS-650, Stablohm 650 Ni80Cr20 is a nickel-chromium alloy (NiCr alloy) characterized by high resistivity, good oxidation resistance and very good form stability. It is suitable for use at temperatures up to 1200°C,and hold a superior service life compared to Iron chromium alumium alloys.

Nichrome Heating Resistance Strip Foil Ni60Cr15 TANKII ALLOY PRODUCT FEATURES All our raw material is made from prime material, not recycle material. We have more than 25 years experience in manufacturing resistance heating alloys. In the market, not all the NiCr alloys are with standard chemical composition and stable resistance. Professional and reliable is the soul of our business. APPLICATION Metal sheathed tubular elements,such as hot plates, grills, toaster ovens and

0.05mm*50mm Nichrome Resistance Ni60cr15 Foil for Etch Resistors TANKII ALLOY PRODUCT FEATURES All our raw material is made from prime material, not recycle material. We have more than 25 years experience in manufacturing resistance heating alloys. In the market, not all the NiCr alloys are with standard chemical composition and stable resistance. Professional and reliable is the soul of our business. APPLICATION Heating Element Hot Cutting Wire Heat Sealers Resistors

Nickel Nicr80/20, Ni80cr20, Cr20ni80, Karma, Evanohm, Silver, Constantan, Tape/Strip Foil ASTM B603,DIN17470,JISC2520,GB/T1234-9001 Ni80Cr20 Tape Nichrome Grade: Ni70Cr30,Ni80Cr20, Ni60Cr15, Ni35Cr20, Ni30Cr20 NiCr 80/20 also called Chromel A, Cr20Ni80, N8, Nichrome V, HAI - NiCr 80, Tophet A, Resistohm 80, Cronix 80, Protoloy, Alloy A, MWS-650, Stablohm 650, NCHW1 NiCr 80:20 – Industrial furnaces (upto 1200°C), electric cooking equipment, precision resistors. NiCr 70:30 –