Copper Nickel Alloy Wire

High Practicality Pure Nickel Wire N200/N201 Nickel 212 Used in Resistor Element Grade:Ni200,Ni201,N4,N6High ductilityExcellent corrosion resistance good mechanical strength Nickel foil and nickel strip for battery Pure nickel grade: Ni200,Ni201, N4,N6 Alloy Description Nickel 200/201 is most widely used grade, generally specified for transistor caps, anodes for electronic tubes, leads of electronic components / Lead-in-Wires for lamps and for Wire-Mesh. Also used in strip

Super Pure Nickel Strip Ni200 for Lithium Battery Pack Material Nickel 201 is a low carbon variety compared with Nickel 200, possessing low annealed hardness and a very low work-hardening rate, desirable for cold forming operations. It is highly resistant to corrosion by neutral and alkaline salt solutions, fluorine and chlorine, but in oxidising salt solutions severe attack will occur.The applications of pure nickel includes food and synthetic fiber processing equipment,

Quality Supplier Resistance Alloy Nichrome Strip Nicr7030 for Electric Heating Elements Resistance Wire made of Nickel Chrome Alloys, Nickel Chrome Iron Alloys, Iron Chrome Aluminium Alloys, Copper Nickel Alloys. Mainly used in heater, heating element and resistor, etc. NiCr 80/20, NiCr 70/30, NiCr 60/15, NiCr 35/20 CrAl 15-5, CrAl 20-5, CrAl 25-5, etc... Constantan, Alloy 30, Alloy 60, Alloy 90, etc. Electric Resistivity from 0.02 u ohm/m-1.53 u ohm/m Operate Temperature

Cu Ni Wire (CuNi1/CuNi2/CuNi6/CuNi8/CuNi10/CuNi14/CuNi19/CuNi23/CuNi30, CuNi34, CuNi44) Material: CuNi1, CuNi2, CuNi6, CuNi8, CuNi10, CuNi14, CuNi19, CuNi23, CuNi30, CuNi34, CuNi44 in form of strip/heet/plate/falt wire/ribbon Characteristic Resistivity ( 200C μΩ.m) Max.working Temperature ( 0C) Tensile Strength (Mpa) Melting point (0C) Density ( g/cm3) TCR x10-6/ 0C (20~600 0C) EMF vs Cu (μV/ 0C) (0~100 0C) Alloy Nomenclature NC020(CuNi14) 0.2 300 ≥310 1115 8.9

Cu Ni Wire (CuNi1/CuNi2/CuNi6/CuNi8/CuNi10/CuNi14/CuNi19/CuNi23/CuNi30, CuNi34, CuNi44) Material: CuNi1, CuNi2, CuNi6, CuNi8, CuNi10, CuNi14, CuNi19, CuNi23, CuNi30, CuNi34, CuNi44 in form of strip/heet/plate/falt wire/ribbon Characteristic Resistivity ( 200C μΩ.m) Max.working Temperature ( 0C) Tensile Strength (Mpa) Melting point (0C) Density ( g/cm3) TCR x10-6/ 0C (20~600 0C) EMF vs Cu (μV/ 0C) (0~100 0C) Alloy Nomenclature NC020(CuNi14) 0.2 300 ≥310 1115 8.9

Dia 0.03-1.0mm C17200 Alloy M25 rod Copper Beryllium Wire for Contact Bridges Beryllium copper wire is a type of wire that is made from an alloy of copper and beryllium. It is also known as copper beryllium, beryllium bronze, or spring copper. Beryllium copper is valued for its high strength, conductivity, and corrosion resistance, which makes it suitable for various applications. Here are some key characteristics and uses of beryllium copper wire: Strength and durability:

Thermocouple Resistance Alloy Constantan Strip Copper Nickel CuNi 44 Foil Model NO. CuNi 44 Carbon Content Low Carbon PCD No ET No Hole No use resistor Component applicable temperature range 5~500ºC density 8.88 g/cm3; Resistivity 0.49 thickness 0.005mm Min, Width 1.0mm Min. surface Bright shape strip/tape/ribbon/flat strip Transport Package Stainless Steel Tube, Bubble Film Specification Rohs Trademark TANKII Origin China HS Code 7502109000 Production Capacity 1000 Kgs/Month

Copper Nickel Alloy Wire/Ribbon Popular Items: CuNi2, CuNi6, CuNi10, CuNi23, CuNi30 CuNi40 Product Description Nickel 23 Manganese 0.5 Copper Bal. Typical Mechanical properties(1.0mm) Yield strength Tensile Strength Elongation Mpa Mpa % 170 350 25 Typical Physical properties Density (g/cm3) 8.9 Electrical resistivity at 20ºC (Ωmm2/m) 0.30 Temperature factor of resistivity(20ºC~600ºC)X10-5/ºC

Enameled wire with high insulation and temperature resistance up to 200 degrees Celsius Product Description These enameled resistance wires have been broadly used for standard resistors, automobileparts, winding resistors, etc. using the insulation processing best suited for these applications, taking full advantage of the distinctive features of enamel coating. Furthermore, we will carry out enamel coating insulation of precious metal wire such as silver and platinum wire

Painted / Enameled /Enamelled Manganin Wire CuMn12Ni Microfilament Product Description These enameled resistance wires have been broadly used for standard resistors, automobile ,parts, winding resistors, etc. using the insulation processing best suited for these applications, taking full advantage of the distinctive features of enamel coating.Furthermore, we will carry out enamel coating insulation of precious metal wire such as silver and platinum wire upon order. Please

Enamelled Constantan resistor copper nickel alloy Wire TANKII Nickel-Copper alloy wire used mainly for its medium range electrical resistivity and very low temperature-coefficient of resistance.Applications include power resistors, shunts, thermocouples and wire-wound precision resistors having operating temperatures up to 400 degree.The copper-based low resistance heating alloy is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage

180/200/220 Temperature Class Enameled Wire Description: Enameled Type Polyester Modified Polyester polyester-imide Polyamide-imide polyester-imide /Polyamide-imide Insulation Type PEW/130 PEW(G)/155 EIW/180 EI/AIW/200 EIW(EI/AIW)220 Thermal class 130, CLASS B 155, CLASS F 180, CLASS H 200, CLASS C 220, CLASS N Standard IEC60317-0-2 IEC60317-29 MW36-A IEC60317-0-2 IEC60317-29MW36-A IEC60317-0-2 IEC60317-29 MW36-A IEC60317-0-2 IEC60317-29 MW36-A IEC60317-0-2 IEC60317-29 MW36-A

Enameled Resistance Wire (NiCr A) Product Description These enameled resistance wires have been broadly used for standard resistors, automobileparts, winding resistors, etc. using the insulation processing best suited for these applications, taking full advantage of the distinctive features of enamel coating. Furthermore, we will carry out enamel coating insulation of precious metal wire such as silver and platinum wire upon order. Please make use of this production-on-order.

Enamelled Manganin CuMn12Ni Alloy insulated wire Product Description These enameled resistance wires have been broadly used for standard resistors, automobileparts, winding resistors, etc. using the insulation processing best suited for these applications, taking full advantage of the distinctive features of enamel coating.Furthermore, we will carry out enamel coating insulation of precious metal wire such as silver and platinum wire upon order. Please make use of this

Enamelled Karma NiCr20AlSi Resistance Alloy Wire Product Description These enameled resistance wires have been broadly used for standard resistors, automobileparts, winding resistors, etc. using the insulation processing best suited for these applications, taking full advantage of the distinctive features of enamel coating.Furthermore, we will carry out enamel coating insulation of precious metal wire such as silver and platinum wire upon order. Please make use of this

Enameled Manganin Wire /6j12 for Resistor Enameled copper wire is a kind of magnet wire with insulation coating, widely used in motors, transformers, inductors, coils, relays and other electrical and electronic components. It features excellent heat resistance, dielectric strength, adhesion, flexibility and chemical resistance. Insulation : Polyurethane (PU/UEW), Polyester (PEW), Polyester-imide (EIW), Polyimide (PIW), Polyamide-imide (PAI) Temperature Class : 130°C, 155°C,

K Type Bare Wire High Oxidation Resistance 10-38 Swg Thermocouple Extension Shanghai Tankii Alloy Material Co., Ltd. offers Tankii 10~38 SWG K type thermocouple element bare wire. This NiCr-Ni/NiAl (Type K) thermocouple wire is widely used in basemetal thermocouples, especially at temperatures above 500°C. It boasts strong resistance to oxidation compared to other base metal thermocouples, providing high EMF against Platinum 67, excellent temperature accuracy, sensitivity,

1.6mm Fecral Thermal Spray Wire Used in Industry for Thermal Spray Coating FeCrAl is a high-resistivity iron-chromium-aluminium alloys for use up to 1400º C (2550º F). With the well-bonding coating and high temperature oxidation resistance. So they can use in variety of industry. They can equivalent to: TAFA Alcro PMET731 Typical Uses and Applications Applications where good corrosion and oxidation Resistance is required Applications for wear resistance such as erosion and

High Resistivity Nickel Chromium Alloy NiCr80/20 Flat Wire Product Description Grade: Ni80Cr20 ,also called MWS-650,NiCrA,Tophet A,HAI-NiCr 80,Chromel A,Alloy A,N8,Resistohm 80, Stablohm 650,Nichorme V etc.Chemical Content(%) C P S Mn Si Cr Ni Al Fe Other Max 0.03 0.02 0.015 0.60 0.75~1.60 20.0~23.0 Bal. Max 0.50 Max 1.0 - Mechanical Properties of nichrome wire Max Continuous Service Temperature: 1200ºC Resisivity 20ºC: 1.09 ohm mm2/m Density: 8.4 g/cm3 Thermal Conductivity:

Fecral Alloy Wire (CrAl 23/5) Nominal Analysis23.00 Cr, 5.00 Al, Bal. FeMax contineous working temperature: 1250ºC.Melting Temperature: 1500ºCElectrical Resistivity: 1.35 ohm mm2/mThis kind of fecral alloy wire is usually used extensively as heating elements in industrial furnaces and electrical kilns.Has less hot strength than Tophet alloys but much higher melting point.SHANGHAI TANKII ALLOY MATERIAL CO., LTDFECRAL AND ALCHROME ALLOY PRODUCER IN CHINA, MOST PROFESSIONAL IN