Copper Nickel Alloy Wire

Enamelled Manganin Constantan Copper Resistance Wire for Precision Instrument (CuNi40/CuNi44/CuNi45) 1) General Description: Constantan (CuNi 44 Alloy): A Copper-Nickel alloy. High specific resistance alloy used in wire-wound precision resistors, potentiometers, volume control devices, winding heavy-duty industrial rheostats and electric motor resistances. Also used as thermocouple alloy with Copper (Type T), Iron (Type J), and Ni-Cr (Type E). It is available with grade wires

Copper Nickel Low Resistance Alloys CuMn3 (NC012 / ISA 13 ) for Thermal Overload Relay 1. Description Cupronickel, also can be called copper nickel alloy, is an alloy of copper, nickel and strengthening impurities, such as iron and manganese. CuMn3 Chemical Content(%) Mn Ni Cu 3.0 Bal. Mechanical Properties Max Continuous Service Temp 200 ºC Resistivity at 20ºC 0.12 ± 10% ohm*mm2/m Density 8.9 g/cm3 Temperature Coefficient of Resistance < 38 ×10-6/ºC EMF VS Cu (0~100ºC) -

CuNi19 Resistance Wire Copper Nickel Heating Element /Cable Swg Wire for Resistor Alloy Wire Temperature Control Tankii Alloy Material Co.,Ltd is one of the best copper nickel alloy cuni19 manufacturers and suppliers in China, welcome to buy discount and low price nc25B from us, and also welcome to check the price and quotation with our factory. CuNi19 (Common Name:CuNi19,NC25) CuNi19 is a copper-nickel alloy (Cu81Ni19 alloy) with low resistivity for use at temperatures up to

Stranded Copper Nickel CuNi Alloy CuNi34 Resistance Wire with High Quality 1. Description Cupronickel, also can be called copper nickel alloy, is an alloy of copper, nickel and strengthening impurities, such as iron and manganese. CuNi34 Chemical Content(%) Mn Ni Cu 1.0 34 Bal. Mechanical Properties Max Continuous Service Temp 350 ºC Resistivity at 20ºC 0.40 ± 5% ohm*mm2/m Density 8.9 g/cm3 Temperature Coefficient of Resistance < 0 ×10-6/ºC EMF VS Cu (0~100ºC) -39 μV/ºC

Cu Ni Wire / Strip (CuNi1/CuNi2/CuNi6/CuNi8/CuNi10/CuNi14/CuNi19/CuNi23/CuNi30, CuNi34, CuNi44) Material: CuNi1, CuNi2, CuNi6, CuNi8, CuNi10, CuNi14, CuNi19, CuNi23, CuNi30, CuNi34, CuNi44 in form of strip/heet/plate/falt wire/ribbon Copper Nickel Resistance Alloy-CuNi10 Chemical Content, % Ni Mn Fe Si Cu Other ROHS Directive Cd Pb Hg Cr 10 0.3 - - Bal - ND ND ND ND Mechanical Properties Max Continuous Service Temp 250ºC Resisivity at 20ºC 0.15±5%ohm mm2/m Density 8.9 g/cm3

Cupronickel C70600 / C71000 / C71300 / C71500 Alloy Seamless Copper Nickel Alloy Pipe Product Description Our copper nickel alloy pipes and tubes are with nickel for main add elements in copper base alloy, a silver white, with metallic luster, named copper. Copper-nickel between each other can be infinitely dissolved, thus forming a continuous solid solution, namely regardless of the number of out of proportion to each other, while the constant for alpha - Single-phase alloy.

Pure Nickel Uns No2201 / No 2200 Micro capillary Tube / Pipe for Heat Exchanger Pure Nickel 201: Shanghai Tankii Alloy material Co., Ltd specialized in production of Resistance Heating alloy, nickel chromium alloy, iron chromium aluminum alloy, nickel aluminum alloy, manganin, copper nickel alloy, thermocouple wire, pure nickel and other precision alloy material in the form of round wire, ribbon wire, sheet, tape, strip, rod and plate. Commercially wrought Nickel 201 ( UNS

7/0.102mm 7/0.175mm Silver Plated Copper Clad Steel Stranded Wire Silver-plated copper-clad steel wire (hard wire) Product standard: refer to ASTM B501-04, ASTM B355-95 or according to customers’ requirements Item Diameter(mm) 0.10

Nickel plated / Tinned Flat Ribbon / flat wire for Copper Cable Electrical Wire Flat Wire Tinned copper wire, nickel plated flat wire, tinned flat wire, etc. Application: Mainly used in special cables such as radio-frequency cables, phase-stable cables, electronics, medical, communications, aerospace, military and other fields. Products comply with IEC national standards, GB national standards, JIS Japanese standards, CS Canadian standards, ASTM American standards. Size:

Tinned Copper Wire / Tin Plated Copper Wire for Electronicl Components Tinned Copper Wire/ Tin Plated Copper Wire Product standard: refer to GB / T4910-2009 or according to customer requirements Item Diameter(mm) 0.05≦d≦0.09 0.09

Enameled Tin / Nikcel / Silver Plated Copper Alloy Ribbon/ Flat Wire for cable Silver Plated Copper Alloy Wire Product standard: refer to JB / T 3135-2011, ASTM B289-99 or according to customer requirements Item Diameter(mm) 0.016 0.02 0.025 0.03 0.04 0.05 Tolerance(mm) ±0.001 ±0.001 ±0.002 ±0.002 ±0.002 ±0.002 Conductivity(%) ≧70 Elongation(%) ≧6 ≧10 Tensile Strength(MPa) / Coating Thickness(um) ≧0.3 Appearance No scratches, oil stains, exposed copper, oxidation, etc.

Nickel Plated Copper Lead / Wire / Stranded wire for Type-K Thermocouple Cable Shield Nickel Plated Copper Wire Product standard: refer to GB / T 11019-2009, ASTM B355-95 or according to customers’ requirements Item Diameter(mm) 0.05≦d≦0.10 0.10

FeCrAl 0Cr25Al5 Fecral Flat Wire Heating Wire for Civil Heating Appliance Resistance heating wire includes pure nickel, chromel alloy, Fe-Cr-Al alloy and copper nickel alloy. Resistance heating wire is produced by smelting, steel rolling, forging, annealing, drawing, surface treatment, resistance control test, etc. Grade 1Cr13Al4 TK1 0Cr25Al5 0Cr20Al6Re 0Cr23Al5 0Cr19Al3 0Cr21Al6Nb 0Cr27Al7Mo2 Nominal composition % Cr 12.0-15.0 22.0-26.0 23.0-26.0 19.0-22.0 22.5-24.5 18.0-21

CuNi23 CuNi Alloy Good Corrosion Resistance Flat Annealed Ribbon/ Strip Introduction: CuNi23Mn is a copper-nickel alloy (CuNi alloy) with medium resistivity for medium-low temperature resistances. The alloy is suitable for use at temperatures up to 400°C (750°F). It is very malleable and has a good resistance to corrosion until temperatures of 400°C. Ideal applications areas are all types of resistances used at low temperature, typically used in heating cables, fuses,

FeCrAl 0Cr25Al5 Fecral Flat Wire Heating Wire for Civil Heating Appliance Resistance heating wire includes pure nickel, chromel alloy, Fe-Cr-Al alloy and copper nickel alloy. Resistance heating wire is produced by smelting, steel rolling, forging, annealing, drawing, surface treatment, resistance control test, etc. Chemical Content, % C P S Mn Si Cr Ni Al Fe Other Max 0.06 0.025 0.020 0.50 ≤0.6 23.0-26.0 ≤0.60 4.5-6.5 Balance - It is widely used for making heating equipment

FeCrAl 0Cr25Al5 Fecral Flat Wire Heating Wire for Civil Heating Appliance Resistance heating wire includes pure nickel, chromel alloy, Fe-Cr-Al alloy and copper nickel alloy. Resistance heating wire is produced by smelting, steel rolling, forging, annealing, drawing, surface treatment, resistance control test, etc. It is widely used for making heating equipment like industrial furnace, civil heating appliance, various electrical resistors and locomotive braking resistor. Name

CuNi44 Cooper Nickel CuNi40 Fresistancelat Wire resistance for resistor ISO 9001 Constantan Wire Definition Resistance alloy with moderate resistivity and low temperature coefficent of resistance with a flat resistance/temperature curve over a wider range than the "manganins". Constantan also shows better corrosion resistance than the man ganins. Uses tend to be restricted to ac circuits. Constantan is also the negative element of the type J thermocouple with Iron being the

CuNi44 wire/Constantan wire/Eureka wire/6J12 wire copper nickel alloy Chemical Content, % Ni Mn Fe Si Cu Other ROHS Directive Cd Pb Hg Cr 44 1.50% 0.5 - Bal - ND ND ND ND Mechanical Properties Max Continuous Service Temp 400ºC Resisivity at 20ºC 0.49±5%ohm mm2/m Density 8.9 g/cm3 Thermal Conductivity -6(Max) Melting Point 1280ºC Tensile Strength,N/mm2 Annealed,Soft 340~535 Mpa Tensile Strength,N/mm3 Cold Rolled 680~1070 Mpa Elongation(anneal) 25%(Min) Elongation(cold rolled)

Ni200 99.96% Pure Nickel Wire 36AWG Superfine wire Or Stranded Wire Used For Leads of Electronic Components Tankii Pure nickel wire has the characteristics of good strength, good plasticity, poor thermal conductivity and high resistivity at high temperature. Nickel wire purity up to about 99.6%. Fineness up to 0.025mm. Pure nickel wire production cycle: 3 to 7 days The state: hard /half hard/soft Tankii nickel mechanical properties are close to carbon steel, the alkali

N6 99.96% Pure Nickel Wire 0.1mm 0.2mm Used For Resistance Heating Wire Tankii Pure nickel wire has the characteristics of good strength, good plasticity, poor thermal conductivity and high resistivity at high temperature. Nickel wire purity up to about 99%. Fineness up to 0.025mm. Pure nickel wire production cycle: 3 to 7 days The state: hard /half hard/soft Tankii nickel mechanical properties are close to carbon steel, the alkali resistance performance of corrosion in metal