PU Sandwich Panel Production Line

High Speed Discontinuous PU sandwich Panel Production Line for Wall and Roof Technical Data uncoiler type of uncoiler:manual material of coil:color coating coil thickness of sheet:0.3~0.8mm width of coil: 1000mm,1200mm weight of coil:≤ 5 t inside diameter of coil:480~520mm apply guard film type of apply guard film:automatic into shearing type of shearing:electrical shearing driven power: 0.75 kw edge forming machine for wall design of profile:see drawing attached type of

Material Thickness 0.27 - 0.4mm PU Sandwich Panel Production Line Manual Uncoiling Working flow Decoiler—feedingdevice—mainforming—PUinjection---straightendevice—punching—FlysawCutting ---run out table Main specification Forming stands: about 46 stands Roller material GCr15: model steel, HRC50-54 Axial diameter: Φ40mm Main axial material: No 45 steel HRB260-280 Driving part is gear box transmission Frequency conversion decelerating Delta PLC control: fix length control ±1mm

Capacity Quality CE Certificated PU Foamed Sectional Door Panel production line Technical Parameter NO. ITEM UNIT PARAMETERS REMARK 1 PANEL MATERIAL TYPES Pre-painted steel; Aluminum; Platinum CUSTOMIZED Hardness MPa ≤350 Thickness mm 0.4-0.8 Coil width mm ≤1250 Coil ID mm 500.600 Coil Weight T 5.8.10 2 FOAM MATERIAL EPS POLYURETHANE CUSTOMIZED 3 Length of sandwich panel: m 3-15 4 Length of sandwich panel: mm ≤1050 CUSTOMIZED 4 Length of sandwich panel: mm ≤200 CUSTOMIZED 5

PU sandwich panel production line Technical Parameter 1.1 Roll Forming Machine a) Motow power: up panel 4Kw, down panel 7.5Kw b) roll forming speed: 5-8m/min c) roller material: 40Cr, surface chrome coated, thickness 0.4mm--0.8mm d) The way of width adjust: straight track, silk pole, reducer motor adjustable e) width adjustable range: 600-1250mm f) sheet thickness: 0.4-0.8mm g) structrue: arm type adjustable, support roller in the middle h) shaft diameter: 50mm 1.2 Uncoiler a

PU sandwich panel production line Technical Parameter NO. Item Unit Parameters Remark 1 Panel Material Types Pre-painted steel; Aluminum; Platinum Customized Hardness MPa ≤350 Thickness mm 0.4-0.8 Coil width mm ≤1250 Coil ID mm 500.600 Coil Weight T 5.8.10 2 Foam Material EPS Polyurethane Customized 3 Length of Sandwich Panel: mm ≤1050 Customized 4 Width of Sandwich Panel: mm ≤200 Customized 5 Speed of Output m/min 3-7 6 Pressure of Foam Injection bar 150-200 7 Length of

PU sandwich panel production line Technical Parameter 1.1 Uncoiler a) motor power: 3Kw b) hydraulic power: 2.2Kw c) raw material: color steel sheet, aluminum sheet d) innder diameter of coil: 500mm- 600mm d) outer diameter of coil: 1200mm e) coil weight: 10T f) sheet thickness: 0.4-0.8mm g) sheet width: 1250mm f) uncoil speed: 1.5-12m/min g) hydraulic pressure: 6.3Mpa 1.2 Coil Car a) hydraulic cylinder lift stroke: up panel 0.5m, down panel 0.5m b) coil car stroke: 2.5m c)

Technical Parameter Polyurethane energy-saving fire protection continuous sandwich panel production line is the equipment mainly produce pu foam sheet. It can produce all kinds of polyurethane flame-retardant panel with the surface of aluminum sheet, color steel, non-woven, kraft paper or aluminum foil. At the same time, after extended function, it could also produce sandwich panel for steel structure. The material thickness, width are according to customer‘s requirements.

0.3-0.8mm 40-42 Kg/m2 Continuous Sandwich Panel Production Line with PLC Control System Technical Parameter Length of panel: 16m Width of panel: 100-600mm Thickness of panel: 10mm Speed of Production line: 3-4m/min ( frequency conversion to adjust speed ) Core Density (Kg/m2):40-42 Thermal Conductivity (W/m°K):0.018 – 0.020 Tensile Strength (KP a) :300–500 Bending Strength (KP a): 550–560 Shear Strength (KP a):120–300 Modulus of Elasticity (Mp a):3.0 – 8.5 Water Absorption :

High Speed 3-8m/min 950mm Width Discontinuous PU Sandwich Panel Production Line with Ce Certification Discontinuous PU Sandwich Panel Discontinuous PU Sandwich Panel Production Line is a good choice with Economy investment, flexible size panel, high qualty 1.Machine is to make the sandwich panel with the color steel sheet or galvanized sheet and the core of polyurethane discontinuously. 2.The multi-layered laminator is consisted of the press and the rail stands. Two

Technical Parameter Length of panel: 6m,12m,15m Width of panel: 500-1250mm Thickness of panel: 40mm-250mm Speed of Production line: 8m/min ( frequency conversion to adjust speed ) Core Density (Kg/m2):40-42 Thermal Conductivity (W/m°K):0.018 – 0.020 Tensile Strength (KP a) :300–500 Bending Strength (KP a): 550–560 Shear Strength (KP a):120–300 Modulus of Elasticity (Mp a):3.0 – 8.5 Water Absorption :

PU sandwich panel production line Technical Parameter 1.1 Uncoiler a) motor power: 3Kw b) hydraulic power: 2.2Kw c) raw material: color steel sheet, aluminum sheet d) innder diameter of coil: 500mm- 600mm d) outer diameter of coil: 1200mm e) coil weight: 10T f) sheet thickness: 0.4-0.8mm g) sheet width: 1250mm f) uncoil speed: 1.5-12m/min g) hydraulic pressure: 6.3Mpa 1.2 Coil Car a) hydraulic cylinder lift stroke: up panel 0.5m, down panel 0.5m b) coil car stroke: 2.5m c)

PU sandwich panel production line Technical Parameter 1.1 Uncoiler a) motor power: 3Kw b) hydraulic power: 2.2Kw c) raw material: color steel sheet, aluminum sheet d) innder diameter of coil: 500mm- 600mm d) outer diameter of coil: 1200mm e) coil weight: 10T f) sheet thickness: 0.4-0.8mm g) sheet width: 1250mm f) uncoil speed: 1.5-12m/min g) hydraulic pressure: 6.3Mpa 1.2 Coil Car a) hydraulic cylinder lift stroke: up panel 0.5m, down panel 0.5m b) coil car stroke: 2.5m c)

PU sandwich panel production line Technical Parameter 1.1 Uncoiler a) motor power: 3Kw b) hydraulic power: 2.2Kw c) raw material: color steel sheet, aluminum sheet d) innder diameter of coil: 500mm- 600mm d) outer diameter of coil: 1200mm e) coil weight: 10T f) sheet thickness: 0.4-0.8mm g) sheet width: 1250mm f) uncoil speed: 1.5-12m/min g) hydraulic pressure: 6.3Mpa 1.2 Coil Car a) hydraulic cylinder lift stroke: up panel 0.5m, down panel 0.5m b) coil car stroke: 2.5m c)

PU sandwich panel production line Technical Parameter 1.1 Uncoiler a) motor power: 3Kw b) hydraulic power: 2.2Kw c) raw material: color steel sheet, aluminum sheet d) innder diameter of coil: 500mm- 600mm d) outer diameter of coil: 1200mm e) coil weight: 10T f) sheet thickness: 0.4-0.8mm g) sheet width: 1250mm f) uncoil speed: 1.5-12m/min g) hydraulic pressure: 6.3Mpa 1.2 Coil Car a) hydraulic cylinder lift stroke: up panel 0.5m, down panel 0.5m b) coil car stroke: 2.5m c)

PU sandwich panel production line Technical Parameter 1.1 Uncoiler a) motor power: 3Kw b) hydraulic power: 2.2Kw c) raw material: color steel sheet, aluminum sheet d) innder diameter of coil: 500mm- 600mm d) outer diameter of coil: 1200mm e) coil weight: 10T f) sheet thickness: 0.4-0.8mm g) sheet width: 1250mm f) uncoil speed: 1.5-12m/min g) hydraulic pressure: 6.3Mpa 1.2 Coil Car a) hydraulic cylinder lift stroke: up panel 0.5m, down panel 0.5m b) coil car stroke: 2.5m c)

Light Weight Aluminum Sheet Continuous PU/EPS Sandwich Panel Production Line With 3-6m/min The production line is used to producing the sandwich panel that both the top and lower layer are color steel plate (or galvanized sheet,aluminum sheet and the core material is PU foam .Mainly composed with metal roll forming machine PU foaming system ,finished sandwich panel handling devices and controlling system of fill line . The finished products include wall panel ,roof panel

High Speed Certificated PU Formed Sandwich Panel Line Capacity EPS Panlel Machine 1. Machine Components No Name Qty 1 Hydraulic Uncoiler(option) 1 set 2 Roof Panel Machine 1 set 3 Hidden Wall Panel Machine 2 sets 4 Z-Lock Wall Panel Machine 1 set 5 Discontinuous PU Sandwich panel Press machine(6M PANEL) 1 set 6 Discontinuous PU Sandwich panel Press machine(12M PANEL) 1 set 7 Aluminum Edge Mold 50mm Each per 6m 6 sets 8 Aluminum Edge Mold 50mm Each per 12m 6 sets 9 Stretch

12m/min High Speed PU Sandwich Panel Production Line Full Configuration PU Sandwich Panel Technical Parameter 1.1 Uncoiler a) motor power: 3Kw b) hydraulic power: 2.2Kw c) raw material: color steel sheet, aluminum sheet d) innder diameter of coil: 500mm- 600mm d) outer diameter of coil: 1200mm e) coil weight: 10T f) sheet thickness: 0.4-0.8mm g) sheet width: 1250mm f) uncoil speed: 1.5-12m/min g) hydraulic pressure: 6.3Mpa 1.2 Coil Car a) hydraulic cylinder lift stroke: up

Working Speed 3-5m/min Garage door PU sandwich panel machine production line Machine Weight 30Tons Technical Parameter Production type: Automatic continuous making Material spec: thickness 0.30-0.6mm, ≤G250 color steel sheet, aluminum. Production width: (400~600) mm can be adjustable Material of compound panel: double layer are metal sheet Main motor power: ≥20.5kw Main power: 128kw, pressure: 380V, 50HZ Structure of forming machine: up layer forming machine and down layer

PU Foaming Sandwich Panels Heat-Presering Ceiling Panle Line with Aluminum Foil Facing Technical Parameter 1. PU foam thickness: 18mm 2. Linear Speed of production:2-5 m/min 3. Maximum Roller Forming speed:15 m/min 4. Main Power of production: ≥ 35KW 5. Cutting:pneumatic piston driving, non-stop cutting via sliding table 6. Raw Material of sheet: Aluminum Coil, corbon steel coil 7. Thickness of sheet material: 0.5-0.8mm Advantage for PU Ceiling 1. Reasonable Price 2. High