Power Transmission Poles

Electrical Galvanized Power Transmission Poles For 69kv Electrical Line COST ----- Install cost The electrical part was designed can be installed within 6 minutes by using the non-screw connector, which definitely reduce your installation time and create lot of savings on the labor cost. The arm was designed can be connected with the pole by two arc fixing plate with two long screws. The new solar panel bracket was composed by sleeve, angle iron and U-steel fixed by screw, It

33kv transmission line steel pole tower & Power Transmission Poles Specification Item TIP DIAMETER BUTT DIAMETER THICKNESS Pole Shape (m) (MM) (MM) (MM) 8 sides 11.8m/5KN 150 355 3 11.8m/6.5KN 180 400 3 11.8m/8KN 190 440 3 11.8m/10KN 190 450 3.5 11.8m/12.5KN 220 500 3.5 11.8m/16KN 230 560 3.5 11.8m/20KN 240 585 4 11.8m/25KN 260 655 4 11.8m/32KN 260 660 5 11.8m/40KN 260 670 6 16m/5KN 150 375 4 16m/6.5KN 180 420 4 16m/8KN 190 460 4 16m/10KN 190 510 4 16m/12.5KN 220 525 4 12

33KV 18m Galvanized octagonal Power Transmission Poles design steel tower Specifications 1. Protecion class: IP65 2. Light source: 100W-400W high-pressure sodium lamp 3. Rated voltage and frequency: 220V(±10%)/50Hz 4. Caliber: 60mm 5. Protecting class against eletric shock: Type I 6. Lamp in die-cast aluminum, coated with powder polyes ter after anti-corrosive treatment 7. A lamp body with a built-ray lens 8. Fasteners screws, all stainless steel 9. Applicable height: 6m-12m

36M Galvanized Power Transmission Steel Poles For Power Line Support in Africa Specification: 1) Steel materials conform to ASTM A36 with Q235(S235,SS400),Q345(S355JR), Q460,etc 2) Welding: Welding complies with CSA and AWS, AWS D1.1 standard.The welders have got corresponding certificate after testing and inspection. 3) Finish: Hot-dip galvanized in accordance with ASTM A123. 4) Pole Height: All available 5) Pole shape: Conical, Round, Polygonal---Octagonal, Dodecagonal,

Hot Dip Galvanized Power Transmission Poles For Electrical Line Project Specification: 1) Steel materials conform to ASTM A36 with Q235(S235,SS400),Q345(S355JR), Q460,etc 2) Welding: Welding complies with CSA and AWS, AWS D1.1 standard.The welders have got corresponding certificate after testing and inspection. 3) Finish: Hot-dip galvanized in accordance with ASTM A123. 4) Pole Height: All available 5) Pole shape: Conical, Round, Polygonal---Octagonal, Dodecagonal, Hexadecago

17M 1200DAN Power Transmission Distribution Galvanized Steel Pole AWS D1. Load Specification To assure our products qualified ,we take steps as follows : 1. Management team : We have employ the foreign export to take chaege of the overall managemnt ,especailly the technical managemnt and quality management . 2. Introducing ISO management ,We are awared ISO 9001:2008 certificate. 3. QC Inpection:It is our company policy that all the finish product should be inspected by our

1500kg Load Weight Galvanized Steel Pole With Rung Clip 65FT Q345 Material Specifications: Suit for 11M 836kg Load Weight Transmission Distribution Galvanized Steel Pole With Rung Clip Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Torlance of the dimenstion +- 2% Power 10 KV

17M-36M AWS D1.1 Galvanized Steel Power Transmission Poles WPS Welding Certification Descripition of material: 1. Poles are made by the high-quality metal plants,which were molded into the multi-row cone-shaped vertical steel barwith hot galvanized anti-corrosion treatment 2. Light plate frame is made by high-quality stainless steel 3. Fastened bolts and nuts of stainless steel Specifications: Height From 9 meter to 100 meter Suit for Electric Power Transmission and

African Bitumen 35 M Double Circuit Galvanized Steel Power Pole 10 KV - 550 KV Transmission Line Specifications: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Torlance of the dimenstion +- 2% Power 10 KV ~550 KV Safety Factor Safety factor for

10m 15m Tapered Galvanised Steel Pole for electrical power transmission poles Material High-quality steel Q235/SS400 from BAOSTEEL Group Welding Technique Automatic submerged arc welding Surface Treatment Hot dip galvanizing and powder painting Welding Standard GB11345 Grade Ⅱ Thickness of Zinc Coating ≥ 86um Adhesive Force of Zinc Coating GB2694-88 Anti-wind Capacity 36.9m/s Anti-corrosion Lifetime ≥20 years Coating Layer Thickness ≥100um Adhesive force GB9286-880 Hardness

Galvanized Steel Poles 6.9kv Power Line Pole / Steel Utility Poles For Mining Industry To assure our products qualified ,we take steps as follows : 1. Management team : We have employ the foreign export to take chaege of the overall managemnt ,especailly the technical managemnt and quality management . 2. Introducing ISO management ,We are awared ISO 9001:2008 certificate. 3. QC Inpection:It is our company policy that all the finish product should be inspected by our

12m 1500Dan Galvanized Steel Pole For Power Line Distribution Project Company Information Established in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on. We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV

Polygonal Power Transmission ASTMA 572 GR65 Steel Galvanized Pole AWS D1.1 Welding Standard Specification To assure our products qualified ,we take steps as follows : 1. Management team : We have employ the foreign export to take chaege of the overall managemnt ,especailly the technical managemnt and quality management . 2. Introducing ISO management ,We are awared ISO 9001:2008 certificate. 3. QC Inpection:It is our company policy that all the finish product should be

Electrical S500MC Galvanized Steel Pole For 110kv Transmission Line Project Specification: 1) Steel materials conform to ASTM A36 with Q235(S235,SS400),Q345(S355JR), Q460,etc 2) Welding: Welding complies with CSA and AWS, AWS D1.1 standard.The welders have got corresponding certificate after testing and inspection. 3) Finish: Hot-dip galvanized in accordance with ASTM A123. 4) Pole Height: All available 5) Pole shape: Conical, Round, Polygonal---Octagonal, Dodecagonal,

11.9m - 600dan Metal Power Utility Octagonal Electric Galvanized Steel Pole Power Line Pole For Double Circuit To assure our products qualified ,we take steps as follows : 1. Management team : We have employ the foreign export to take chaege of the overall managemnt ,especailly the technical managemnt and quality management . 2. Introducing ISO management ,We are awared ISO 9001:2008 certificate. 3. QC Inpection:It is our company policy that all the finish product should be

8m 5KN Galvanized Steel Pole For Power Distribution Line Exported To Africa Specification: 1) Steel materials conform to ASTM A36 with Q235(S235,SS400),Q345(S355JR), Q460,etc 2) Welding: Welding complies with CSA and AWS, AWS D1.1 standard.The welders have got corresponding certificate after testing and inspection. 3) Finish: Hot-dip galvanized in accordance with ASTM A123. 4) Pole Height: All available 5) Pole shape: Conical, Round, Polygonal---Octagonal, Dodecagonal,

14m Power Transmission Distribution Galvanized Plumbing Pipe AWS D1.1 For Transmission All of our material are purchased from famous mill factory to assure the quality. 1.A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory ,otherwise we have our reason to refuse the material . 2.Before put into production ,all the material must pass the chemical and physical analysis to make sure that they have meet

27M 20KN Load Power Transmission Distribution Galvanized Steel Pole With AWS D1.1 Welding Standard Specification To assure our products qualified ,we take steps as follows : 1. Management team : We have employ the foreign export to take chaege of the overall managemnt ,especailly the technical managemnt and quality management . 2. Introducing ISO management ,We are awared ISO 9001:2008 certificate. 3. QC Inpection:It is our company policy that all the finish product should be

Hot Dip Galvanized 17M Electric Steel Power Tubular Pole Gr50 Transmission Line Poles Specification for Electric Pole from Milky Way Steel Material The material is in accordance with NF EN 10025 Standard and NF EN 10149 Standard,it has the following property. -Yield Strength=355N/mm2 -Toughness remains the same under 20 degrees below zero. -Galvanization is in accordance with NFA35503 Standard Class 1.Steel Material GradeChina GBAmerica ASTM ASMEJapan JISEuropenENGemanyDINEng

Power Transmission Distribution Galvanized Steel Pole AWS D1.1 Welding Standard ASTM Galvanization To assure our products qualified ,we take steps as follows : 1. Management team : We have employ the foreign export to take chaege of the overall managemnt ,especailly the technical managemnt and quality management . 2. Introducing ISO management ,We are awared ISO 9001:2008 certificate. 3. QC Inpection:It is our company policy that all the finish product should be inspected by