Forged Sleeves

Stainless Steel Pipe Alloy Steel Cylinder Short Introduce: Material:Carbon steel,alloy steel and stainless steel Max length:3000mm Max weight:15000kg Heat treatment: N,N+T,Q+T or as customer's requirement Report:3.1 Certificates,UT report,Material report or others. Products process: The forgings manufacturing and inspecting process are showed in the following picture : Certfiticates List: Certificates

1.4923 Forged Sleeve Blanks Cylinder Forging Forgings Pipe (1) Short Introduction:Largest OD:5000mm Largest Weight:12000kgSurface Finish:3.2um Ra Or As Required.Forging Reduction Min:3.1 Or As RequiredRought machining or Finis Machining(2) 1.4923 Chemical compositionC:0.18~0.24%Si:0.1~0.5%Mn:0.4~0.9%P≤0.025%S≤0.015%Ni:0.3%~0.8%Cr:11.0~12.5%Mo:0.8~1.2%V:0.25~0.35% (3) Heat Treatment:Quenching In Oil And Tempering. (4) Mechanical Properties:ThicknessProof StrengthTensile

1045 C45 S45C P280GH P355GH P305GH Forged Seamless Carbon Steel Pipe Hydro-Cylinder Oil Cylinder Forgings Material:Carbon steel,alloy steel and stainless steel Max length:3000mm Max weight:15000kg Heat treatment: N,N+T,Q+T or as customer's requirement Report:3.1 Certificates,UT report,Material report or others. Products process: The forgings manufacturing and inspecting process are showed in the following picture : Certfiticates List: Certificates list of Jiangyin Fangyuan

EN10222-2 P280GH 1.0426 Carbon Steel Forged Sleeve Forged Cylinder Normalized Q + T Proof Machined Short Information: Surface Finish:3.2um Ra Or As Required. Forging Reduction Min:3 Or As Required Rought machining or Finis Machining P280 GH 1.0426 Chemical Composition: % C Si Mn Min 0.08 0 0.90 Max 0.20 0.40 1.50 % P S Cekv Min 0 0 0 Max 0.25 0.015 0.45 Heat Treatment: Normalized, Normalized+Tempered, Quenched + Tempered Mechanical Properties: Thichness mm Condition Upper

Carbon Steel Stainless Steel Alloy Steel Hot Rolled Cylinder Max Length 1200mm What is Rolled Ring Forging? The ring rolling process starts with a circular preform of metal that has been previously upset and pierced (using the open dieforging process) to form a hollow “doughnut.” This doughnut is heated above the recrystallization temperature and placed over the idler or mandrel roll. This idler roll then moves under pressure toward a drive roll that continuously rotates to

Centrifugal Casting Supply Non Standard Large Size Steel Spool Sleeve Largest Weight:15000kg Surface Finish:6.3um Ra Or As Required. Forging Reduction Min:3.1 Or As Required Rought machining or Finis Machining Heat Treatment: Q+T Normalizing Or customized The main manufacturing equipments: Name&Description Capacity Quantity 3600Thydraulic press Max. single forging in 18T 1 2000T hydraulic press Max. single forging in 9T 2 800 hydraulic press Max. single forging in 5T 1 6T

Forging Manufacturer Custom Made Cold Forging Bushing Sleeves Largest OD:2500mm Largest Weight:15000kg Surface Finish:3.2um Ra Or As Required. Forging Reduction Min:3.1 Or As Required Rought machining or Finis Machining Chemical Element: C:≤0.08% Si≤1% Mn:≤2.00% P≤0.045% S≤0.030% Ni:10%~14% Cr:16.0~18.0% Mo:2.00~3.00% Heat Treatment: Solution Mechanical Properties: Item Tensile Strength Yield Strength Elongation Rate Reduction Of Area Hardness F316 ≥515 Mpa ≥205 Mpa ≥30% ≥50%

Non Standard High Precision Forging Manganese Centrifugal Casting Steel Spool Sleeve Material:Carbon steel,alloy steel and stainless steel Max length:3000mm Max weight:15000kg Heat treatment: N,N+T,Q+T or as customer's requirement Report:3.1 Certificates,UT report,Material report or others. Products process: The forgings manufacturing and inspecting process are showed in the following picture : Certfiticates List: Certificates list of Jiangyin Fangyuan ISO9001:2008 ISO14001

Max Length 1200mm Machining Carbon Steel Forged Sleeves Hot Rolled Cylinder Short Introduce: Material:Carbon steel,alloy steel and stainless steel Max length:3000mm Max weight:15000kg Heat treatment: N,N+T,Q+T or as customer's requirement Report:3.1 Certificates,UT report,Material report or others. Products process: The forgings manufacturing and inspecting process are showed in the following picture : Certfiticates List: Certificates list of Jiangyin Fangyuan ISO9001:2008

OEM/ODM Large Crusher Custom Forging Alloy Steel Large Eccentric Shaft Sleeve (1) Short Introduction: Surface Finish:3.2um Ra Or As Required. Forging Reduction Min:3 Or As Required Rought machining or Finis Machining (2) 1.4903 Chemical composition: % C Si Mn P S Cr Ni Min 0.08 11.50 Max 0.15 1.00 1.50 0.040 0.030 13.50 0.75 (3) Heat Treatment: Quenching And Tempering. (4) Mechanical Properties: Thickness (mm) Max 1) proof strength Rp0.2 Mpa Min 3) Tensile strength Rm Mpa Max