Footwear Testing Equipment

Professional Safety Footwear Insole Board Flexing Testing Equipment Descriptions: Used for testing the safety insole board folding resistance. Fixed clamping part of insole board in the middle, 70 mm from the clamping area(front of insole board) with two fixed rod clamp specimen, the fixed link can do reciprocating crooked moves around holding place. Specifications: Test group number: 2set Bending frequency: 16±1 rps The Bend largest vertical height:33 mm Crooked distance: 70

Shoes Sides Winding Resistance Tester / Footwear Uppers Bending Tester Descriptions: This machine is suitable for the rubber, Leather, PU Leather, Sole materials bending test, Use the material make into norms specimens, After the bending fatigue of continuous. Observe crack degree to understand or compare their durability. Specifications: Specimen: (L)6"*(W)1"*(D):(L)6"*(W)1"*(D) Sole: 0.25" Rubber: 0.5"0.125" Clamp: 6 group, can be test 12pcs Bending angle: 90

High Precision Prior Heel Shoes Flexing Tester With Standard GB/T3903.1 Descriptions: This test machine is specialized testing the bending resistance of shoe sole and finished shoes, or measure the fracture part of the specimen and the fracture level to improve quality. Specifications: Specimen: can test two pairs of shoes at a time,children’s shoes 4~13 yards,adult shoes 1~12yards(UK size) Bending angle: 30, 45, 60, 90( optional) Test speed: 100±5 C.P.M Counter: LCD liquid

National Standard Whole Shoe Flexing Tester , Footwear Testing Equipment Descriptions: The whole shoe flexing tester is used for determining the flexibility resistance of finished shoes or shoe sole at room temperature. Principle: Fix the specimen on the test machine to have the reciprocating flexing movements under the fixed angle and frequency. Then check the sole’s flaw and foxing strip open length after some times, meanwhile, keep an eye on any change of the footwear

Finished Shoes Flexing Testing Equipment / Shoes Bending Testing Machine Descriptions: Fiberboard Flexing Tester is used to assess the flexing endurance of fiberboards used in footwear. It is applicable to all fiberboards other than those used for insole seats and heel lifts. Fiberboard is flexed mechanically and repeatedly to (90±1)each side of the vertical at the rate of 60 cycles per minute until failure occurs. From the number of flexing cycles to failure, a flexing index

Shoe Outsole Flexing Testing Equipment With Standard EN20344 And SATRATM161 Descriptions: This machine is specialized testing the flexing resistance and the fracture damage level of gym shoes, casual shoes, work shoes and other shoes after the reciprocating flexing movements under the fixed angle and frequency. It’s especially applicable to outsoles of footwear including sole constructions. Use a cutting tool to piece the specimen between the cleats at three points along the

High Precision Sole Bending Testing Machine / Outsole Flexing Tester Descriptions: Used to test shoe sole material on the transmission of cloth belt around the roller do the cycle test, to observe the degree of resistance to bending. Sole bending testing machine is for the flexing test of the non leather outsole. Sew up or stick the non Leather outsole, put it to the turning wheel. Turn on the wheel, the outsole will be flexed. After a few times,check the damage and breakage.

Labratory Footwear Testing Equipment , NBS Rubber Abrasion Tester Descriptions: NBS Abrasion Tester is used to determine the resistance to abrasion of rubber products and sole materials. Widely used in rubber tire, chariot tracks, sole, etc. of the rubber products abrasion resistance test, It’s a good Is to assist the industry to control the product quality. Specifications: Specimen size:25.4×25.4×6.35mm Load:2265g (5LB)×3pcs Drum diameter:150mm Speed:45±5rpm Abrasive paper

Professional Footwear Testing Equipment , Shoelace / Shoestring / Latchet Abrasion Tester Descriptions: Shoelace Abrasion Resistance Tester is used to determine the abrasion resistance of shoe laces. Shoelaces unit is: take 2pcs shoelaces, The middle phase hook , forming 1pcs on right, the other on left , the machine right clamp (dynamic) holding right both ends, Clip after natural 25 mm apart on both ends, with template to assist, make right shoelace on 52.2 induce the left

Professional Leather Friction Testing Machine , Footwear Testing Equipment Descriptions: Leather friction testing machine is used to test the shoes leather or synthetic leather lining layer etc. after friction damage and the degree of discoloration. Can also be used to assess material on the surface of printing label font wear-resistant rub fastness. This machine has a dry, wet two testing ways. Specifications: Weight: 24.5±0.5N 7.1±0.2N Friction shaft speed: 150±5 RPM Metal

Widely Laboratory DIN Abrasion Tester / Rubber Wear Testing Equipment Descriptions: Din abrasion test is a comparative test for measurement of abrasive resistance of vulcanised natural or synethetic rubbers,polymers,paints etc.. Applicable extensive material abrasion characteristics, such as the elastic materral, rubber, tires, conveyor belts, shoes soles, soft synthetic leather etc. With hight efficiency, good reproducibility and easy operation. Specification: Sample size:

Prefessional Universal Leather Friction Color Fastness Testing Machine / Equipment Descriptions: The machine is designed to carry out a rub fastness test on the surface of leather or coated fabrics to determine the marring of the surface finish and to assess the amount of color transfer from the sample to the rubbing pad. This instrument is suitable for leather, textile, belt, trademarks, cardboard and other friction materials by foreign object damage and decoloring.

Widely Laboratory Electronic Taber Abrasion Testing Machine / Equipment​ Descriptions: This machine Widely Used to testing wear resistant material,fabric, rubber,coating, plywood,paper, leather and etc. According to the different material with different grinding wheel wear test, check before and after the abrasion of specimen weight difference to assess physical results. Specifications: Specimen:O.D.:110mm,I.D:6mm Abrasion wheel:φ2″(MAX .45mm)1/2″(W) Abrasion wheel center

High Precision Electronic Heel Lift Abrasion Tester , Footwear Testing Equipment Detailed Descriptions: Place the heel lift onto the abrasion paper mounted on this tester. Abrade the specimen under specified load at a certain abrasion times to assess its abrasion degree. Specification: Load 1400,1700,2200g Rubbing Hammer 38*36mm Counter 0~99,999 Dimension(L*W*H) 680×200×260mm Weight 8kg Advantages: 1. Speciality in testing equipment 2. Various products to choose from 3.

Professional BS-903 Standard Footwear Tseting Equipment , AKRON Abrasion Tester Descriptions: This abrasion tester is designed to use together with a special balance for testing the abrasive consumption for the rubber products such as shoe sole,tire and apron wheel etc. Specification: Specimens: O.D. 63.5 mm, I.D.is 12.7 mm, thickness12.7 mm, length: 220 mm, hardness: 60 ~ 70 Sand wheel: D:150 mm W:25 mm, size # 36,combination degree Sample shaft speed: BS 250±5r/min, GB76±2r

Lab Professional Footwear Testing Equipment to Test Shoe Flexing Description: This machine is specialized testing the flexing assistance and the fracture damage level of gym shoes, casual shoes, work shoes and other shoes after the reciprocating flexing movements under the fixed angle and frequency. Specification: Specimen: can test two pairs of shoes at a time Counter: LCD,0~999,999 Specimen length limit: 150~400mm Test speed: 50~150r/min Specimen max width: each 150 mm(MAX)

Ross Flexing Tester Footwear Testing Equipment Shoes Rubber Bending Description: This ross bending tester can specially test the flex-endurence of rubber, sole ,PUetc.Observe whether the specimen develops the damage and crack at right angle after repeated bending. Advantages: 1. Speciality in testing equipment 2. Various products to choose from 3. Accept customization 4. Excellent after-sale service Technical parameters: Bending angle max 90 (adjustable) Bending Speed 100 ±3

High Precision Safety Shoe Impact Tester , Footwear Testing Equipment Description: Safety Shoe Impact Tester comply with EN, ANSI, BS, CSA regulations. Impacting the the steel toe caps of satety shoes through 100J or 200J power, then observe the sinkage to value its quality. The design is different among EN, ANSI, BS, CSA, so please prescribe the regulation when ordering. Specifications: Drop hammer Weight: (EN)20±0.2KG, (BS,ANSI)22.7KG Height: (EN)0-1100MM Impact Energy: (EN

Outsole Belt Flexing Test Apparatus Footwear Testing Equipment in Laboratory Description: Sole adhesive or suture zone in the surface of canvas, cloth tape and then set the wheels of this machine, start the wheels, shoe soles that are bent, bending, after a certain number to view the damage and fracture shoe case, in order to understand their resistance to bending properties. Specification: While test: up to 6 soles Counter: LCD, 0 ~ 999,999 Horsepower: AC1/2HP inverter motor

High Performance Footwear Testing Equipment to test Shoes Waterproof Flexing Description: Shoes waterproof flexing test machine is used to test the shoe resistance to water immersion and bending properties in water, test methods are regularly immersed in water and bending in water, the soaking time or the number of twists can be set, when the test reaches the set time or number the machine is auto-sensing and shutdown. The test machine can also be used to simulate the water