Flammability Testing Equipment

SPI Flammability Tester CFR 16 Part 1611 High Precision Flammability Testing Equipment Application: SPI Flammability Tester (Vinyl Material), to determine the ignition properties of vinyl plastic film material according to CFR 16 Part 1611 – U.S.A. Flammable Fabrics Act for flammability of apparel vinyl plastic film. The rate of burning shall not exceed 1.2 in./s as judged by the average of five determinations lengthwise and five determinations transverse to the direction of

Professional Gypsum Board in Burning Stability Testing Equipment with ISO 6308 Standard Application: Determine the stability of gypsum plasterboard subject to flame, the flame is generated from two dia. 40mm burner with dia. 2.5mm nozzle, the temperature of flame is up to 900oC. Standards: GB/T 9775-2008, ISO 6308. Specification: Tester is composed of test part and control part adopts the integrated design, test case and important parts adopt stainless steel, corrosion

Halogen Acid Gas Release Test Apparatus High Precision Flammability Testing Equipment​ Introduction: Halogen Acid Gas Tube Furnace is used to test the acidity of the gas that released during combustion from cable or optical cable components material. The equipment is designed and produced on the basis of GB/T 17650 and IEC 60754. The cable material is processed by prius tube furnace, and then the pH value and conductivity of the gas that generated in combustion process are

Cellular Plastic Horizontal Flammability Testing Equipment ISO 9772 Standard Application: Used for determine the density of ISO845-1985 under the condition of less than 250 kg/M3 of foam under small sample in the small flame horizontal burning performance. Standard: GB/T8332-2008 "foam plastics combustion performance test method, the horizontal burning method ISO9772:2001 Cellular plastics -- Determination of horizontal burning characteristics of small specimens subjected to

Bunched Cable Vertical Flame Spread Testing Equipment, VFT-716, IEC 60332-3, KS C IEC 60332 Product Application: Bunched cable vertical flame spread tester is used to detect vertically mounted under specified conditions for vertical flame spread inhibiting the ability of bundle cable or fiber optic cable. In accordance with IEC60332—3—10: 2000 Standards: IEC60332—3—10: 2000, UL1685, EN 50399, GB/T18380.(31—36)—2008 Technical parameters: 1. Internal dimensions of stainless

Electronic Spread of Flame Testing Equipment Standards ISO 5658-2 ASTM E 1321 Description: It’s suitable to evaluate burning characteristics of construction materials and measure the spread of flame,flame condition of ignition at multiple distances,critical flux,and total heat release value.It can also measure the burning characteristics of vertical specimen.After recording time of ignition and extinguishment at each distance,we can calculate the flame spread rate. Other test

Solar Cell Spread of Flame and Burning Brand Tester UL 790 Flammability Testing Equipment Description: This equipment virtually simulates an external fire to evaluate the resistance of the roof and other physical elements of fire, in order to qualify for the flame spread experiments(A~C class), in case of A 1.82m, B 2.4m and C 3.9m. It is an equipment to displacement of the testing material and the exposure and falling of the roof structure. Standards: UL 1730 : Smoke

NFPA 701 Test Method 1 Vertical Flammability Testing Equipment Application: NFPA 701-2004 Flammability Tester, to determine the ignition resistance properties of draperies and other hanging fabrics according to test method NFPA 701#1, and it is suitable for single-layer or multi-layer fabrics, but not suitable for fabrics with density larger than 700g/m2 (21oz/yd2). Specifications: 1. Open-type burning chamber structure; 2. Chamber body in calcium silicate board, and wrapped

Fire Resistance Valve, Hose & Pipe Flammability Testing Equipment ISO 19921&2 Descriptions: Fire resistance tester of Fire fighting fittings cope with the following three standards: Fire resistance test of Valve ( ISO 10497), Fire resistance test of hose assembly (ISO 19921 & 19922), Fire resistance test of plastic pipes (FTP II Res A 753) After applying fire imitation using a burner indicated in standards of Various valves in internal pressure conditions, hose assembly of

Large Scale Horizontal Fire Resistance Test Furnace Flammability Testing Equipment Application: Evaluate the fire resistance of a horizontal construction assembly. Standards: BS 476 (20-24), BS EN 1363 (1-2), BS EN 1364 (2), BS EN 1365 (2-4), BS EN 1366 (1-3), ASTM E 119, ASTM E 814, ASTM E 1966, UL 263, UL 1709, UL 1479, UL 2079, UL10 (B-C), ISO 834 (1, 5-7, 9), ISO 6944 (1-2), ISO 3008 Descriptions: The fire resistance of a material forming part of an assembly is an

NFPA-701 Methods 2 Textiles and Films Flame Propagation Testing Equipment Application: It is used to assess the propagation of flame beyond the area exposed the ignition source. It is applicable to vinyl-coated fabric blackout linings and fabrics including multilayered fabrics, films and plastic blinds, with or without reinforcement or backing, with area density greater than 700g/m2. Standard: NFPA 701-2004 Methods 2 Specification: 1. Laboratory: in accordance with 12.2 of

ASTM D 2843 Micro-computer Plastic Burning or Decomposition Smoke Density Testing Equipment Description: The test apparatus is used for measuring the somke-producing characteristic of plastics under controlled condition of combustion or decomposition, and also can be used for other building materials. Standards: ASTM D 2843,DIN 4102,GB/T 8627 Specification: 1. Gas source: 95% propane gas or higher purity, or the same purity of gas(owned); 2. Photometric system: a light source

Laboratory Flammability Testing Equipment Plastic Ignition Temperature Test Apparatus Description: Decompose and release the combustible gas from plastic material under regulated testing conditions,ignited by outer flame and burned a certain time,to measure the minimum temperature of the material.Application comparison within material through the testing results. Standard: ASTM D 1929,GB 4610,GB 9343 Specification: Furnace tube inner diameter 100 ± 5mm, length 240 ± 20mm, not

Building Materials Flammability Testing Equipment Fire Propagation Apparatus / FPA Description: This fire-test-response standard determines and quantifies material flammability characteristics, related to the propensity of materials to support fire propagation, by means of a fire propagation apparatus (FPA).The main parameters contains time to ignition,mass loss rate,heat release rate(chemical and convective) and smoke generation rate.The scope of testing is various materials

Building Materials and Products Single Burning Item Flammability Testing Equipment / SBI Application: Method of test for determining the reaction to fire performance of building materials and products excluding flooring,and excluding products which are indicated in the EC Decision 2000/147/EC. Standard: EN 13823 Reaction to fire tests for building products ― Building products excluding floorings exposed to the thermal attack by a single burning item GB/T 20284 Single burning

Building Material Heat Release Rate Flammability Testing Equipment / Cone Calorimeter Application: Combustion product stream through the oxygen concentration of the oxygen consumption and calculate the heat release rate, heat release rate of the material is also the material properties of the combustion products of the combustion burner of the most important parameters, more accurately measure the material during combustion heat release rate, for predicting fire hazard

Professional Flammability Testing Equipment Plastic Combustion Performance Test Machine Description: The plastic combustion performance test machine is suitable for measuring and evaluating the combustion characteristics of plastic materials. Flash point and auto-ignition point tester for measuring the temperature of the plastic flash fire and auto-ignition temperature, which is convenient to evaluate plastic ignition performance. This tester is high precision and reasonable

High Precision 45 degree Flammability Testing Equipment Textile Performance Description: Used to testing the flammable performance of the textile. Stainless testing room has glass window, after ignition automatic counting times (0.01 second precision) . Specimens use sample brush and the nylon brush. Advantages: 1. Speciality in testing equipment 2. Various products to choose from 3. Accept customization 4. Excellent after-sale service Specifications: Spread time scope: 0-99

Professional Nail Bed Flammable Testing Equipment For Hair Combustion Description: Nail Bed Flammable Tester.Used in the detection part of the combustion of flammable hair, and record the time, to see whether the burning of part of the meet flammability standards Advantages: 1. Speciality in testing equipment 2. Various products to choose from 3. Accept customization 4. Excellent after-sale service Specifications: Dimension 25.4*25.4cm Weight 20 kg Standard ASTM F963 Power

Building Material Flammability Testing Equipment / Ignitability Test Apparatus​ Description: Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45-tilted burner is advanced horizontally until the flame (length 20 mm) reaches the pre-set contact point