Non Destructive Testing Equipment

HUATEC Hand-held Alloy Analyzer energy dispersive handheld alloy analyzer HXRF 120 Performance Features 1. The instrument is smaller in size and lighter in weight, convenient to carry. 2. High-speed processing chip, advanced algorithm and efficient software are combined to make instrumental analysis faster. 3. Imported high-performance X-ray emission tube and ultra-high resolution detector, combined with digital multi-channel processing technology, enable HUATEC handheld X

LC-display Two units Fe% and FN Digital Ferrite Analyzer Ferrite Meter Ferrite content measurements 1. Preface In the chemical industry the stress-bearing members of containers,pipes,reactor vessels and other plant are usually made of austenitic steel or duplex steel or cladding of austenitic chromium-nickel steel．The residual ferrite content must be within a specific range compatible with the mechanical strength requirements or the item concerned．The HFE100 was developed to

Energy dispersive type Hand-held Alloy Analyzer HXRF-120 Elementsto be Analyzed and Test Modes HXRF-120 elementsanalyzedScope of elements in standard test mode can be extended if there is such a need.HXRF-120can analyze Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Rh, Pd, Ag, Cd, Sn, Sb, Hf,Ta, Re, Pb, and Bi,total25 elements. Alloy f amily 1.Iron-basedalloy series (stainless steel, chromium/molybdenum alloy steel, low alloy steel, tool steel, seamless steel) 2.Nickel

Industry Portable Led X-Ray Film Viewer General Introduction HFV-510B LED film illuminator, designed to meet the requirement of mobile working site, with the combination of China nondestructive detection national standard JB/T4730-2005, JB/T4730-2005, DL/T821-2002, and GB3323-2005, is a high performance and cost-efficient pure white light source illuminator. Features Applies super high color temperature long-life lamp tube, the highest color temperature of HFV-510B LED film

LC-display Digital portable Ferrite Analyzer, Ferrite Meter for Austenitic steel or Duplex Ferrite content measurements 1. PrefaceIn the chemical industry the stress-bearing members of containers,pipes,reactor vessels and other plant are usually made of austenitic steel or duplex steel or cladding of austenitic chromium-nickel steel．The residual ferrite content must be within a specific range compatible with the mechanical strength requirements or the item concerned．The

Ultrasonic Thickness gauge accessories step calibration block 10 Steps block Supply Ability Supply Ability: 500pc Per Month Packaging & Delivery Packaging Details standard export carton Port tianjin Calibration Blocks

High precision 75 degree Paper Gloss Meter HGM-BZ75 for paper testing Gloss Meter Model HGM-BZ75 (75°intelligent ) Standard International standard ISO-8254, TAPPI - T480, ASTM-C346, ASTM-D2457, DIN67530 and China standard GB8941.3 The technical parameters follows China metrology standard JJG696-2002. Application BZ75 ° intelligent glossiness meter is follow ISO - 8254, TAPPI - T480, GB8941.3 standard manufacture high-precision, miniaturization, intelligent paper with

Industry X ray Film Processor Developer ,Film Developer Machine TQ-14TZ TQ-14 series fully automatic filling agent hing-speed industry film processor is our new product. Its quality is very high and it is also very reliable. It has carried out a fully automatic high-speed processing of filling agent, refilling agent and automatic heating up and film developing- washing-fixation-washing-drying. It is one new product instead of ones now. Features The function of automatic

Ultrasonic Through Coating Thickness Gauge TG4100,5MHz Echo To Echo TECHNICAL DATA DISPLAY 128X64 PIXEL LCD WITH BACK LIGHT MEASURMENT RANGE STANDARD 0.8 mm TO 300 mm IN STEEL DEPENDING OF THE PROBE special request can reach measuring range up to 500mm THROUGH COATING 2.5 mm – 18 mm ( DEPNDING OF THE PROBES ) TOLERANCE +/-0.05 mm IN STEEL DISPLAY RESOLUTION 0.01 mm ( Less than 100.0 mm ) mm ( over 100 mm ) BULIT-IN STANDARD BLOCK 4.00 mm VELOCITY RANGE 1000-9999 m/s POWER 2

Thru Coating high precision digital Ultrasonic Thickness Gauge TG-3250 TG-3250 is a high precision digital ultrasonic thickness gauge. Based on the same operating principles as SONAR it is capable of measuring the thickness of various materials with accuracy as high as 0.001 millimeters, or 0.0001inches. It is adapted to measure the thickness of good conductor for ultrasonic, such as metal (steel, cast iron, aluminum, copper), plastic, ceramic, glass, glass fiber and so on

Ferrite content measurements 1. Preface In the chemical industry the stress-bearing members of containers,pipes,reactor vessels and other plant are usually made of austenitic steel or duplex steel or cladding of austenitic chromium-nickel steel．The residual ferrite content must be within a specific range compatible with the mechanical strength requirements or the item concerned．The HFE100 was developed to facilitateaccurate ferrite content measurements On welded seams and

Hand-held Alloy Analyzer HXRF 120, Alloy Analyzer Alloy Material Identification (PMI) SDD Detector Performance Features 1. Small, light and easy to carry. 2. High-speed processing chip, advanced algorithm and high-responsive software, resulting in even faster analysis. 3. High-performance X-ray Tube, Ultra-high Resolution Detector combined with Digital Multi-channel Processing Technology, yielding super-high detection resolution. 4. Indicator lights flash on both sides for

Ferrite meter Ferrite content tester Ferrite tester HUATEC HFE-100 SP10A 1. Application In the chemical industry the stress-bearing members of containers,pipes,reactor vessels and other plant are usually made of austenitic steel or duplex steel or cladding of austenitic chromium-nickel steel．The residual ferrite content must be within a specific range compatible with the mechanical strength requirements or the item concerned． The HFE-100 was developed to facilitate accurate

Elevator Steel Wire Rope Fracture Elevator Wire Rope Testing , Crane inspection Wire rope flaw detector is a collection of advanced flaw detection technology at home and abroad. Using digital processing and network technology, a portable intelligent wire rope electromagnetic nondestructive testing instrument is developed. It is widely used in mining, cableway, lifting equipment, elevator, port machinery, cable bridge and other fields. Wire rope flaw detector can be real-time

Elevator Wire Rope Testing , Wire Rope Inspection Steel Rope Flaw Detector Introduction of elevator wire rope flaw detector I. Product Overview ◆ can on-line test the wire rope internal and external broken wire, wear, corrosion, deformation, loose strands, jump wire, material changes and other defects. ◆ the test results can meet the standards of different industries and can be displayed in the form of the number of broken wires and the ratio of the broken wire area to the

Digital high precision crack depth measuring instrument Crack detpth gauge HMG SERIES Crack Depth Gauge Used in the equipment maintenance of the operating system -- for the equipment parts with cracks, the development status of cracks can be mastered through regular inspection, and the timely and economical repair or update time can be determined to ensure the safety of the system. Used in the quality control of the manufacturing process -- for the work piece with cracks in

penetrant calibration block test block PT test specimen developer,remover Model:YM-B All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983, where applicable. Heat treatment to the requirements of GB/T6394/2002. where practicable tolerances to (+/-0.1mm) unless otherwise stated. Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air cooled Material standard:according to ISO 10474-3.1.B,JIS G 0415-3.1.B Depth:100µm Width

HSM-A12 Type AC DC arc generator Technical parameters: 1, Power Specification: AC220V (±10%)/50Hz 2. Arc Current: 3.9~5A 3, Dimensions: 145x300x340 (mm) 4, Weight: 13kg 5, Applicable to spectroscope model HSM-5, HSMP-5, HSMP-8

Mini type Prism Dispersion Alloy Steel and non-ferrous Metal Spectroscope Spectrometer 390-700nm HSMP-8 Features The prism is used as the original dispersion; the total length of the ultra-small instrument is 340mm, heavy 2kg; especially suitable for small space or aerial use; the generator with a small car weighs only 12kg and eliminates the need for grounding wire with isolated transformers on site. It is suitable for the analysis of alloy steel and non-ferrous metals in

Prism Dispersion Alloy Steel and non-ferrous Metal Spectroscope Spectrometer 390-700nm HSMP-5 Features Using Prism as the original dispersion, simple operation, easy to carry, can be equipped with a car generator weight of only 12kg, the field without grounding wire belt isolation transformer. It is suitable for the analysis of alloy steel and non-ferrous metals in the wavelength range of 390-700nm. Application Spectroscope HSM-5 used for: 1. Copper: Cr,W,Mn,V,Mo,Ni,Co,Ti,Ai