Ultrasonic Flaw Detector

HUATEC Hand-held Mineral Analyzer HXRF 130 Ø Performance Features 1. Small, light and easy to carry. 2. High-speed processing chip, advanced algorithm and high-responsive software, resulting in even faster analysis. 3. High-performance X-ray Tube, Ultra-high Resolution Detector combined with Digital Multi-channel Processing Technology, yielding super-high detection resolution. 4. Indicator lights flash on both sides for safety purposes during measurement, i.e., the built-in

HRD-DGZY Elevator Rope Tension Meter uSummary Usage and Application Elevator rope tension tester is mainly used in elevator wire rope tension test . To check and adjust each wire rope of elevator in the process of installation, check before acceptance and annual inspection to ensure its tension as consistent as possible, thereby prolonging the service life of the traction wheel . The tension tester can also be applied to the bridge with sling, tower wiring,overhead wire

HUATEC Pipe Corrosion Detection Spark Detector Porosity Holiday Detector elcometer holiday detector 1.OVERVIEW HD-101 Holiday Detectors are employed in the non-destructive detection and location of pinholes, bare spots or thin points in protective coatings applies for anti-corrosion protection over metal and concrete (conductive) surfaces. With corrosion an extremely costly and disruptive worldwide problem, preventative determination becomes essential. For newly constructed

latest ultrasonic flaw detector, Light weight, small volume, preferential prices FD-530mini Standard Configuration: Table 1.1 List of standard configurations Designation Quantity Main unit 1 4.2V power adaptor 1 probe connecting cable 1 Carrying case 1 Instruction manual 1 Straight probe 1 (Dia 20mm, 2.5MHz) Angle probe 1 (13×13, 60°, 2.5MHz) Measuring Range and Specification: Range of scanning: 0 mm ~1000 mm Resolution for scanning: 1mm Range of gain: 0dB ~110 dB D-Delay: 0

Wireless version portable all-in-one machine Wire rope flaw detector HRD-100 1.Specifications Standards: GB/T21837-2008, ASTM E1571-2001 (Standard specification for electromagnetic examination of ferromagnetic steel wire rope), GB/T5972-2006/ISO 4309:90, GB8918—2006 Detecting range:Φ1.5—46 mm (choose different copper sleeve,20mm,28mm,34mm,46mm optional now) Relative velocity between sensor and wire rope:0.0—6.0 m/s Best choice:0.3—1.5 m/s Best gap between guide sleeve and

HUATEC FD620 Ultrasonic Flaw Detector with mobile APP ★Probe calibration, curve making and other operations are prompted by the dialog box in the whole process, no need to read the manual ★ All tools included what you need: DAC, AVG, color Bscan, AWS, etc. ★Pulse Repetition Frequency: 30-3000Hz,accurate adjustment, high speed scanning, never missing detection ★ High Signal to noise ratio, clear and stable echo, anti-noise design, perfect for tough working conditions ★ 10

Sd Card Touch Screen Lithium Ion Battery Portable Ultrasonic Flaw Detector Auto Calibration Function Introduction Digital ultrasonic flaw detector is advanced type, which is touch screen, can quickly, easily and without damage, accurately detect, locate, evaluate and diagnose various defects inside the work-piece such as cracks, welds, pores, sand holes, inclusions, folding, etc. It has been applied for electric power, petrochemical, boiler and pressure vessel, steel

IIW V1 Ultrasonic Calibration Blocks 1018 304 4340 Steel ultrasonic ndt equipmentarbon Steel Related standards: ISO2400:2012 Calibration block No.1, ISO 7963:2010 Calibration block No.2 ASME BPVC-V non piping calibration blocks, AWS D1.1/D1.1M-2015 , ASTM E164-13, SC,DC,DSC,RC,DS, MAB blocks, IIW type 1 calibration block,IIW type 2 calibration block,ASTM E127-15, Distance- Amplitude (set of 19), Area-Amplitude (set of 10),ASTM E317-11,type RA Rsolution test block,Horizontal

0-10000mm FD350 industrial carck tester Ultrasonic inspection detector Product Info: · Automated calibration Automated gain · Automated make video of test process and play · AWS D1.1, DAC/TCG, JIS DAC/TCG, AVG, DGS, A scan & B scan · High-speed capture and very low noise · Solid metal housing (IP65) · High contrast viewing of the waveform from bright · Powerful pc software and reports can be export to excel · Small size, light weigh model Main Technical Index: FUNCTIONS

Two Gates Setting and Alarm Indication Ultrasonic Flaw Detector FD301 with DAC AVG&B scan,AWS function,6dB DAC Function Product Info.: · Automated calibration Automated gain · Automated make video of test process and play · DAC AVG & B scan, AWS function, 6dB DAC · High-speed capture and very low noise · Solid metal housing (IP65) · High contrast viewing of the waveform from bright · Powerful pc software and reports can be export to excel through RS232/ USB interface Features

High Resolution Digtal Ultrasonic Flaw Detector A Scan B Scan FD520 with Automated 0 - 120dB gain Main faetures: ★ Automated calibration,Automated gain, 0-120dB gain ★ DAC,AVG,TCG,B scan,AWS ★ High-speed capture and very low noise ★ Solid metal housing,water / oil proof,dust proof ★ high contrast viewing of the waveform from bright ★ Powerful pc software and reports can be export to excel Automated display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,ф)；

Digital ultrasonic flaw detector FD201B with Solid metal housing ( IP65 ) Convenient to Make and Use DAC and AVG Curves Features for digital ultrasonic flaw detector FD201B: DAC, AVG curves AWS function High-speed capture and very low noise Gate and DAC alarm;Acoustic-Optical alarm Solid metal housing (IP65) High contrast viewing of the waveform from bright Powerful pc software and reports can be export to excel Automated display precise flaw location (Depth d, level p,

High - speed Solid Metal Housing Digital Ultrasonic Flaw Detector FD550 with Automated Gain 0dB - 130dB Features: Automated calibration,Automated gain, 0-130dB gain DAC,AVG,TCG,B scan,AWS High-speed capture and very low noise Solid metal housing,water / oil proof,dust proof High contrast viewing of the waveform from bright Powerful pc software and reports can be export to excel Automated display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,ф)； Automated

Accessory of Ultrasonic Flaw Detector Metric / Imperial Ultrasonic Calibration Blocks in 1018 Carbon Steel Calibration Blocks/Standard Test Blocks/ UT Blocks Order Code Shape (Not to Scale) Type Description /Application Standard Made To Material Size V1 A2 (BS) I.I.W Calibration Standard. Calibration of Shear and compression wave probes. Checking beam angle, emergent point and resolution. Calibration of time base and gain settings. B.S. 2704 DIN 54120 IIW (International

Portable High Resolution Digtal Ultrasonic Flaw Detectors A Scan FD510 with Big memory of 500 A graph Main faetures: ★ Automated calibration,Automated gain, 0-110dB gain ★ DAC,AVG,TCG,B scan,AWS ★ High-speed capture and very low noise ★ Solid metal housing,water / oil proof,dust proof ★ high contrast viewing of the waveform from bright ★ Powerful pc software and reports can be export to excel Automated display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,ф

High - speed Solid Metal Housing Digital Ultrasonic Flaw Detector FD550 with Automated Gain 0dB - 130dB Features: Automated calibration,Automated gain, 0-130dB gain DAC,AVG,TCG,B scan,AWS High-speed capture and very low noise Solid metal housing,water / oil proof,dust proof High contrast viewing of the waveform from bright Powerful pc software and reports can be export to excel Automated display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,ф)； Automated

Professional FD550 ultrasonic flaw detector featuring 130dB gain, 0-10000mm measuring range, and advanced B-scan capabilities. This portable NDT instrument offers automated calibration, 12-hour battery life, and comprehensive testing modes including DAC, AVG, TCG, and AWS D1.1 compliance. Ideal for industrial non-destructive testing applications.

Compact 1kg ultrasonic flaw detector with automated calibration, video recording, and 1000 A-scan storage. Features IP65 metal housing, 0.5-20MHz frequency range, and compliance with AWS D1.1 standards. Ideal for portable non-destructive testing with 10-hour battery life and comprehensive probe compatibility.

Industrial-grade ultrasonic flaw detector featuring 2-16 channels with 10kHz maximum repetition frequency and 46dB sensitivity margin. Provides high-stability testing for pipes, bars, and metal materials with comprehensive interface options and modular expandability for quality control applications.

Professional FD350 portable ultrasonic flaw detector featuring 5.25-inch color TFT LCD, 640×480 VGA resolution, and IP65-rated metal housing. Supports AWS D1.1 standards with automated calibration, video recording, and comprehensive testing functions for industrial NDT applications.