Aluminium Foil Roll

8000 Series Mill Finished Aluminum Fin Strips Heat Exchange Materials For Air Dryer Application: Our Aluminum Fin Strips are widely use for Heat-Exchange Materials of Intercooler, Radiator, Oil Cooler,Evaporator,Condenser,Air Cooler,Air Dryer. We can not only produce according to customers' requests, but also recommend relevant products or give good suggestions according to customers' requests and our experiece. Specification of aluminum fin strip: 1.Alloy states: can

Specification: 1) Alloy 8011 1145, 1235 2) Thickness: 0.008-0.2mm 3) Width Size: 200mm-1250mm 4) Customer's specification is welcomed Characteristic: Tensile strength(MIN): 50 Mpa Breaking elongation(MIN): 15% Bond strength(MIN): 4 N/cm Appearance: Blue or natural color, Very smooth, Non-knife-cut mark. Usage: Used for waterproof layer and shield layer. Packing: 1) Plastic drum. 2) According to the customer's demand. Terms and conditions: Trade term CIF / CFR / FOB Payment

Mill Finished Heat - Exchange Materials Aluminium Strips For Evaporator Various kinds of heat exchangers widely use our aluminium strip, such as condensers and evaporators of air conditioning, radiators,heater cores,charge air coolers/intercoolers,engine oil coolers/transmission oil coolers of engine cooling. Trumony mainly produces the aluminium strip with alloy such as 3003, 1060, 1100, and 3003 clad 4343 (4343+3003+4343), 3003 clad 4045 (4045+3003+4045)/(4043/3003/7072)

Trumony mainly produces the aluminium strip with alloy such as 3003, 1060, 1100, and 3003 clad 4343 (4343+3003+4343), 3003 clad 4045 (4045+3003+4045)/(4043/3003/7072) etc. Aluminium strip is widely used for manufacturing of various kinds of heat exchangers: 1.Air conditioning: Condensers Evaporators 2.Engine cooling: Radiators Heater cores Charge air coolers/intercoolers Engine oil coolers/transmission oil coolers Specification of aluminum strip: 1) Core Alloy: 1060, 3003,

Hot - Rolling Mill Finished Aluminum Sheet Coil Fin Strip For Intercooler Application: Heat-Exchange Materials of Intercooler, Radiator, Oil Cooler,Evaporator,Condenser,Air Cooler widely use our Aluminum Fin Strip. We can recommend relevant products or give good suggestions according to customers' requests and our experiece. Specification of aluminum fin strip: No. Specification Details 1 Core Alloy 1060, 3003, etc 2 Cladding alloy 4343, 4045, 7072, 5052 etc 3 Cladding rate 4

Narrow Aluminium Strips For Radiator , Aluminium Sheet Coil Silver Color Application: Our Aluminum Fin Strip is widely used for Radiator,Intercooler,Oil Cooler,Evaporator,Condenser,Air Cooler and so on. Specification of aluminum fin strip: 1)Core Alloy: 1060, 3003, etc 2)Cladding alloy: 4343, 4045, 7072, 5052 etc 3)Cladding rate: 4%-18% 4)Thickness: 0.05-3.0mm 5)Width: 12 - 1250mm (max) 6)Temper: HO, H14 etc 7)ID.: 150mm, 200mm, 300mm, 400mm, 500mm 8)Normal OD.: 900-1450mmm 9

Application: For industry, cable transformer, auto radiator, side rubbing strip, etc. Alloy: 8011, 1100, 1050, 1060, 3003, 1200, etc Temper: H14, H16, H18, H24, H26, O Thickness: 0.05-0.6mm Width: 5-200mm ID: 75MM, 150MM Commercial terms Minimum Order Quantity: 5 metric tons Price: negotiation Payment Terms: T/T or LC Supply Ability: 50,000 mt per year Delivery Time: 30 working days after received your down payment Packaging Details: Standard export packaging

Silver Hot Rolling Aluminium Strips For Heat Sink , Width 12mm - 1250mm 1. Application: Aluminum Fin Strip for Heat Sink 2. Thickness: 0.05-3.0mm 3. Width: 12 - 1250mm (max) 4. Temper: HO,H14 etc 5. Inner&Outer Diameter: ID.:150mm,200mm,300mm,400mm,500mm Normal OD.:900-1450mmm 6. Alloy State: 1)Core Alloy: 1060, 3003, etc 2)Cladding alloy:4343,4045,7072,5052 etc 3)Cladding rate:4%-18% 7.Chemical Composition(%) Core Alloy:3003 Element Si Fe Cu Mn Mg Cr Zn Bi Zr Ti Al Max 0.6 0

Specification of aluminum strip: 1)Core Alloy: 3003,3003MOD etc 2)Cladding alloy:4343,4045,7072 3)Cladding rate:4%-18% 4)Thickness:0.05-3.0mm 5)Width: 12 - 1250mm (max) 6)Temper: HO,H14,H14SR,H16 etc 7)ID.:150mm,200mm,300mm,400mm,500mm 8)Normal OD.:900-1450mmm 9)Other sizes is available according to customers request 10)Main Production Process:Melting--surface polishing(remove the oxidation layer)--Welding the core layer and cladding layer---Cladding(according to the cladding

Refrigerator Blue Color Coated Aluminum Coil Roll Standard Export Packaging Application: It is mainly used for household air conditioner,refrigerator,auto AC,auto water tank etc. Alloy States: 1100,3003, 3102,8011 as per customers' demands Temper: O,H18,H22,H24,others Thickness: 0.06-0.2mm Package: Standard Export wooden Case/Pallet Characteristics: 1) Corrosion resistance:Salt spray test: A.epoxy coated aluminum foil:500 Hours,class 8 in PH

3003 / 4045 T3 - T8 Aluminum Coil For Container Side Plate , Thickness 1.2mm 1.6mm 2.0mm Thickness:1.2mm,1.6mm,2.0mm3003/4045 Aluminum coiled strip used for side plate for containeralloySiFeCuMnMgCrZnZrTiCore: EN AW-3003-00.06max.0.70max.0.05-0.21.0-1.5-------0.10max.------Liner: EN AW-40459.0-11.00.80max.0.3max.0.05max.0.05max.0.10max.0.10max. 0.20max. Terms and conditions:Trade termCIF / CFR / FOBPayment term30% before production+70% before shipment100% Irrevocable L/C at

4343/3003+1.5%Zn+4045 H16 0.08 x 1070mm Aluminum Foil Roll for Automotive Heat Exchangers 1. Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite-material for welding heat exchanger 1) Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 － 0.1 0.05 0.03 1 3003+1%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 0.5-1.50 0.05 0.05 2 3003+1.5%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 1.0-2.0 0.05 0.05 3 3003+1.5

4343/3003+1.5%Zn+Zr+4045 H16 0.08 x 1070mm Aluminum Foil Roll for Automotive Heat Exchangers 1. Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite-material for welding heat exchanger 1) Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 － 0.1 0.05 0.03 1 3003+1%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 0.5-1.50 0.05 0.05 2 3003+1.5%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 1.0-2.0 0.05 0.05 3 3003+1

4343/3003+0.5%Cu+4045 H16 0.08 x 1070mm Aluminum Foil Roll for Automotive Heat Exchangers 1. Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite-material for welding heat exchanger 1) Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 － 0.1 0.05 0.03 1 3003+1%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 0.5-1.50 0.05 0.05 2 3003+1.5%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 1.0-2.0 0.05 0.05 3 3003+1.5

4343/3003+0.5%Cu+4045+1%Zn H16 0.08 x 1070mm Aluminum Foil Roll for Automotive Heat Exchangers 1. Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite-material for welding heat exchanger 1) Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 － 0.1 0.05 0.03 1 3003+1%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 0.5-1.50 0.05 0.05 2 3003+1.5%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 1.0-2.0 0.05 0.05 3 3003

4343/3003+0.5%Cu/4343 H16 0.08 x 1070mm Aluminum Foil Roll for Automotive Heat Exchangers 1. Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite-material for welding heat exchanger 1) Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 － 0.1 0.05 0.03 1 3003+1%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 0.5-1.50 0.05 0.05 2 3003+1.5%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 1.0-2.0 0.05 0.05 3 3003+1.5

4343/3003+0.5%Cu+4343 H16 0.08 x 1070mm Aluminum Foil Roll for Automotive Heat Exchangers 1. Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite-material for welding heat exchanger 1) Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 － 0.1 0.05 0.03 1 3003+1%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 0.5-1.50 0.05 0.05 2 3003+1.5%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 1.0-2.0 0.05 0.05 3 3003+1.5

4343/3003+1.5%Zn+1%Zr +4343 H16 0.08 x 1070mm Aluminum Foil Roll for Automotive Heat Exchangers 1. Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite-material for welding heat exchanger 1) Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 － 0.1 0.05 0.03 1 3003+1%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 0.5-1.50 0.05 0.05 2 3003+1.5%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 1.0-2.0 0.05 0.05 3

4343/3003+1Zn+4343 H16 0.08 x 1070mm Aluminum Foil Roll for Automotive Heat Exchangers 1. Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite-material for welding heat exchanger 1) Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 － 0.1 0.05 0.03 1 3003+1%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 0.5-1.50 0.05 0.05 2 3003+1.5%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 1.0-2.0 0.05 0.05 3 3003+1.5%Zn

4343/3003+1Zn+4343 H16 0.08 x 1070mm Aluminum Foil Roll for Automotive Heat Exchangers 1. Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite-material for welding heat exchanger 1) Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 － 0.1 0.05 0.03 1 3003+1%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 0.5-1.50 0.05 0.05 2 3003+1.5%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 1.0-2.0 0.05 0.05 3 3003+1.5%Zn