Copper Based Alloys

Factory on sale 0.5mm Copper nickel alloy Hecnum/CuNi44 wire (Common Name:CuNi44,NC50.Cuprothal, Alloy 294, Cuprothal 294, Nico, MWS-294, Cupron, Copel, Alloy 45, Neutrology, Advance, CuNi 102, Cu-Ni 44, Konstantan,constantan.) CuNi44 is a copper-nickel alloy (Cu56Ni44 alloy) characterized by high electrical resistance, high ductility and good corrosion resistance. It is suitable for use at temperatures up to 400°C Typical applications for CuNi44 are temperature-stable

0.25mm*3.0mm Copper nickel alloy Hecnum Tape on DIN 125 reels (Common Name:CuNi44,NC50.Cuprothal, Alloy 294, Cuprothal 294, Nico, MWS-294, Cupron, Copel, Alloy 45, Neutrology, Advance, CuNi 102, Cu-Ni 44, Konstantan,constantan.) CuNi44 is a copper-nickel alloy (Cu56Ni44 alloy) characterized by high electrical resistance, high ductility and good corrosion resistance. It is suitable for use at temperatures up to 400°C Typical applications for CuNi44 are temperature-stable

High quality Bright 0.5mm*7.0mm Copper Nickel alloy Hecnum Strip (Common Name:CuNi44,NC50.Cuprothal, Alloy 294, Cuprothal 294, Nico, MWS-294, Cupron, Copel, Alloy 45, Neutrology, Advance, CuNi 102, Cu-Ni 44, Konstantan,constantan.) CuNi44 is a copper-nickel alloy (Cu56Ni44 alloy) characterized by high electrical resistance, high ductility and good corrosion resistance. It is suitable for use at temperatures up to 400°C Typical applications for CuNi44 are temperature-stable

Mechanical Resistance Pure Copper Foil C11000 C1221 0.1mm - 1.2mm Thickness For Electric Springs Copper is copper elemental,because its color is purplish red named.Red copper is industrial pure copper with a melting point of 1083℃, no isomorphic transformation, and a relative density of 8.9, five times that of magnesium. It is about 15% heavier by volume than ordinary steel. Because it has rose red, the surface of the formation of oxidation film after purple, so commonly

Inconel718 alloy is a precipitation-hardening nickel-chromium-iron alloy containing niobium and molybdenum. It has high strength, good toughness and corrosion resistance in high and low temperature environment under 650℃. Its state can be solid solution treatment or precipitation hardening state. Chemical composition Alloy % Ni Cr Fe C Mn Si Cu Al P S 718 Min. 58 21 1.0 Max. 63 25 balance 0.1 1.5 0.5 1 1.7 0.02 0.015 Physical properties Density Melting point Magnetic 8.24g/cm

Corrosion Resistance Copper Based Alloys Ni68Cu28Fe Monel400 N04400 For Pump / Valve Monel400 is the corrosion-resistant alloy with the largest amount, the most versatile and excellent comprehensive performance. The alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas media, and excellent corrosion resistance to hot concentrated alkali liquor. It is also resistant to corrosion by neutral solutions, water, sea water, atmosphere, organic compounds, etc

Copper alloy for spectacle-frame wire BZn15-20, BZn18-18, BZn18-20 Product introduction: Copper alloy for spectacle-frame wire has excellent mechanical property, well corrosion resistance and good cold and hot processability. It could be made to different spectacle-frame accessories with hundreds of style and shape, such as semi rim, full rim of V-groove, full rim of U-groove and double-sided groove etc. Product Feature: 1.High elasticity, excellent cold and hot processabilit

copper alloy wire for musical instrument, C24000 wire, T76300 wire, C52100 wire, Copper alloy for musical instrument Product introduction: Copper alloy for musical instrument with special process has good elastic, has characteristics of well wearability and excellent corrosion resistance,and is used for accessories of string instruments such as guitar. Product Feature: 1.Good wearability, long operating life 2.Good corrosion resistance, no oxidation and no color-changing 3

Narrow-Strip of Manganin/Constantan 6j12, 6j13, 6j40 for Electrical Purposes Product introduction: Narrow-strip of manganin/constantan in our company belongs to copper-manganese alloy. Compared with traditional manganin/constantan, it haswhigh dimensional accuracy, excellent processability, stable resistivity, and its material utilization could increase by more than 50% in the manufacturing process. Product Feature: 1.Low temperature coefficient of resistance 2.Stable

CuNiSn strip copper nickel alloy for optical instruments/elastic sensitive elements of instrument sensors CuNiSn Alloy 1. Chemical composition Brand Ni Sn Cu Impurity content (less than) Mn Fe Pb C CuNiSn 20.0~22.0 4.5~5.73 Bal. 0.60 0.60 0.05 0.02 2.Mechanical properties Brand Status Thickness (mm) Hardness (HV) Tensile strength Rm/(N/m㎡) Yield strength Elongation Roughness CuNiSn R 0.04~0.5 ≥278 ≥885 ≥850 ≥12 0.08 M ≥360 ≥1160 ≥1130 ≥8 0.08 3. Main uses Brand Main

Copper alloy wire/rod ERCuSn-A /SG-CuSn welding wire for GMAW,GTAW Copper Alloy Welding Wire are suitable for welding of Copper and Copper alloys, due to their good electrical and thermal conductivity, corrosion resistance, metal-to-metal wear resistance . CROWNALLOY offer different Types of Copper Alloys wire. Chemical Composition Brand name Equivalent Standard Chemical Composition % Cu Al Si Zn Mn Pb Sn Ni P Fe BM-189 AWS ERCu 98.0 0.01 0.30 -- 0.05 0.02 1.0 -- 0.15 -- Din

Manganin alloy Manganin alloy with moderate resistivity and low temperature coefficent. Manganin foil and wire is used in the manufacture of resistors, particularly ammeter shunts, because of its virtually zero temperature coefficient of resistance value and long term stability. Manganin wire is also used as an electrical conductor in cryogenic systems, minimizing heat transfer between points which need electrical connections. Manganin is also used in gauges for studies of

Type of bare Alloy wire The alloy we can do enamelled are Copper-nickel alloy wire,Constantan wire,Stainless steel wireManganin wire. Kama Wire,NiCr Alloy wire,FeCrAl Alloy wire etc alloy wire Size: Round wire:0.018mm~3.0mm Color of enamel insulation:Red,Green,Yellow,Black,Blue,Nature etc. Ribbon Size:0.01mm*0.2mm~1.2mm*24mm Moq:5kg each size Type of insulation Insulation-enamelled Name Thermal Level℃ (working time 2000h) Code Name GB Code ANSI. TYPE Polyurethane enamelled

CuNi1 CuNi2 CuNi6 CuNi10 is kind of low resistance (heating) alloy.It is one of the key materials of the low-voltage electrical products. It is widely used in low-voltage circuit breaker, electric blankets.thermal overload relay and other low-voltage electrical product. Normal composition% Nickel 1,2,6,10 Manganese - Copper Bal. Typical Mechanical properties(1.0mm) Yield strength Tensile Strength Elongation Mpa Mpa % 90 210 25 Typical Physical properties Density (g/cm3) 8.9

(Common Name: Manganin 43,CuMn12Ni4,Manganin ) Shunt Manganin 43 is a copper-manganese-nickel alloy (CuMnNi alloy) for use at room temperature. The alloy is characterized by very low thermal electromotive force (emf) compared to copper. Shunt Manganin43 widely used for Shunt resistor with the highest requirements, shunt manganin43 has been used in precision built electrical components such as Wheatstone bridges, decade boxes, voltage drivers, potentiometers and resistance

OhmAlloy15(Resistance heating wire and resistance wire) (Common Name:CuNi10,Curpothal 15,NC15) OhmAlloy15 is a copper-nickel alloy (Cu90Ni10 alloy) with low resistivity for use at temperatures up to 250°C. Curpothal 15 is typically used for applications such as heating cables, fuses, shunts, resistors and various types of controllers. Normal composition% Nickel 10 Manganese - Copper Bal. Typical Mechanical properties(1.0mm) Yield strength Tensile Strength Elongation Mpa Mpa %

Constantan( Ohmalloy 049) (Common Name: CuNi45, NC50.Cuprothal, Alloy 294, Cuprothal 294, Nico, MWS-294, Cupron, Copel, Alloy 45, Neutrology, Advance, CuNi 102, Cu-Ni 44, Konstantan,constantan.) OhmAlloy049 is a copper-nickel alloy (Cu56Ni44 alloy) characterized by high electrical resistance, high ductility and good corrosion resistance. It is suitable for use at temperatures up to 400°C Typical applications for OhmAlloy49 are temperature-stable potentiometers, industrial

OhmAlloy 010(Resistance heating wire and resistance wire) (Common Name:Cuprothal 10,CuNi6,NC6) OhmAlloy 010 is a copper-nickel alloy (Cu94Ni6 alloy) with low resistivity for use at temperatures up to 220°C. OhmAlloy 010 Wire is typically used for low-temperature applications such as heating cables. Normal composition% Nickel 6 Manganese - Copper Bal. Typical Mechanical properties(1.0mm) Yield strength Tensile Strength Elongation Mpa Mpa % 110 250 25 Typical Physical

Common Name: (CuNi2,NC5) OhmAlloy 005 is a copper-nickel alloy (Cu2Ni98 alloy) with low resistivity for use at temperatures up to 200°C. Cuprothal 5 is typically used for low-temperature applications such as heating cables in electric blankets and pillows. Normal composition% Nickel 2 Manganese - Copper Bal. Typical Mechanical properties(1.0mm) Yield strength Tensile Strength Elongation Mpa Mpa % 90 220 25 Typical Physical properties Density (g/cm3) 8.9 Electrical resistivity

OhmAlloy012 (Resistance heating wire and resistance wire) Common Name:CuNi8,Alloy12,CN12 OhmAlloy012 is a copper-nickel alloy (Cu82Ni12 alloy) with low resistivity for use at temperatures up to 250°C. OhmAlloy012 is kind of low resistance heating alloy.It is one of the key materials of the low-voltage electrical products. It is widely used in low-voltage circuit breaker, electric blankets.thermal overload relay, and other low-voltage electrical product. OhmAlloy12 is