Thermal Spray Wire

Thermal Spraying Metal Wire 1.6mm / 2mm 1. Stainless Steel Brand Chemical Composition 1Cr13 Cr 13 2Cr13 3Cr13 4Cr13 Ni, Cr, Mo 316L Ni, Cr, Mo 1Cr18Ni9Ti Cr 18 Ni9 2. NIAl alloy solid wire (Monel) Our company use Vacuum furnace and casting control to make the NiAl alloy solid wire, it is specially used for arc spray boning layer. This wire has stable chemical composition, low oxygen and high bonding strength. Chemical Composition Coating Strength (Mpa) Melting temp (℃)

1.6/2.0mm Nickel based alloy wire NiAl95/5 Thermal Spray Wire use for electroplating Ch PRODUCT OVERVIEW Thermal spraying techniques are coating processes in which melted (or heated) materials are sprayed onto a surface.The "feedstock" (coating precursor) is heated by electrical (plasma or arc) or chemical means (combustion flame).Thermal spraying can provide thick coatings (approx. thickness range is 20 micrometers to several mm, depending on the process and feedstock), over

1.6mm Thermal Spray Wire Ferrum based wire OCr25Al5 for Boiler Tubes& Tube Shilds PRODUCT OVERVIEW OCr25Al5 is an iron chrome aluminum alloy wire specifically designed for arc spraying. It produces dense, well-bonded coatings with excellent wear and high temperature oxidation resistance. It is widely used for machine element repair and dimensional res toration applications. OCr25Al5’s low shrink characteristic alloys increased coating thickness. OCr25Al5 is machinable.

Nickel Aluminum Alloy Thermal Spraying Wire Ni95Al5 PRODUCT OVERVIEW NiAl 95/5 wire Thermal Spray Wire (Sp 95/5, SD 95/5, Ni95Al5) NiAl 95/5 is an austenitic nickel-aluminium alloy (NiAl alloy) for use in arc and flame spray systems. The alloy produces dense, well bonding coatings. Thermal spraying wire in a wide range of alloys for high-temperature corrosion protection, bonding layers, build-up coating and sealing. Sizes Standard sizes are 1.60 and 2.00 mm ( 0.0693 and 0

1.6mm, 2.0mm Thermal Spray Wire NiAl20 Grade Nickel based alloy wire Nickel based alloy wire PRODUCT OVERVIEW Thermal spraying techniques are coating processes in which melted (or heated) materials are sprayed onto a surface.The "feedstock" (coating precursor) is heated by electrical (plasma or arc) or chemical means (combustion flame).Thermal spraying can provide thick coatings (approx. thickness range is 20 micrometers to several mm, depending on the process and feedstock),

Ferrum based alloy wire OCr25Al5 Thermal Spray Wire 1.6mm, 2.0mm PRODUCT OVERVIEW OCr25Al5 is an iron chrome aluminum alloy wire specifically designed for arc spraying. It produces dense, well-bonded coatings with excellent wear and high temperature oxidation resistance. It is widely used for machine element repair and dimensional res toration applications. OCr25Al5’s low shrink characteristic alloys increased coating thickness. OCr25Al5 is machinable. TYPICAL DEPOSIT

1.6mm Nickel based alloy wire NiAl95/5 Thermal Spray Wire arc spraying Ch PRODUCT OVERVIEW Nickel based alloy wire Our company use Vaccum furnace and casting control to mak the NiAl alloy solid wire, it is specially used for arc spray boning layer. Specification of wire: 1.6mm, 2.0mm, 15kg/spool.Applying technique: Arc spray Thermal spraying techniques are coating processes in which melted (or heated) materials are sprayed onto a surface.The "feedstock" (coating precursor) is

45Ct 1.6mm Thermal Spray Wire Arc Spray For Casting , Pumper Tube PRODUCT OVERVIEW NiCr20 is a high purity nickel chrome wire specifically designed for arc spraying. It produces dense, well-bonded coatings with excellent machineability, electrical conductivity, and high temperature oxidation resistance up to 1800 degrees F (980 degrees C). It is widely used for machine element repair, electrical and high temperature corrosion applications. TYPICAL DEPOSIT CHARACTERISTICS: Þ

45Ct 1.6mm Thermal Spray Wire Arc Spray For Casting , Pumper Tube PRODUCT OVERVIEW NiCr20 is a high purity nickel chrome wire specifically designed for arc spraying. It produces dense, well-bonded coatings with excellent machineability, electrical conductivity, and high temperature oxidation resistance up to 1800 degrees F (980 degrees C). It is widely used for machine element repair, electrical and high temperature corrosion applications. TYPICAL DEPOSIT CHARACTERISTICS:

Pump Casings Thermal Spray Wire , Pure Nickel Wire For Corrosion Resistance PRODUCT OVERVIEW Nickel is a high purity nickel wire specifically designed for arc spraying. Nickel produces dense, well-bonded coatings with excellent machineability, electrical conductivity and corrosion resistance. It is widely used for machine element repair applications requiring high corrosion resistance. TYPICAL DEPOSIT CHARACTERISTICS: Typical Hardness: HRB 50-60 Bond Strength: 5000 psi

Alloy C-276 Thermal Spray Wire Hrc 35 Typical Hardness 7000 Psi Bond Strength PRODUCT OVERVIEW Alloy C-276 is a high purity nickel-chrome-moly-tungsten (Alloy C-276) wire specifically designed for arc spraying. It produces dense, well-bonded coatings with good resistance to corrosion, and stress cracking in caustic, acidic and chloride mediums. It’s high hardness makes it very resistant to abrasion and metal wear. TYPICAL DEPOSIT CHARACTERISTICS: Typical Hardness: HRC 35

Boiler Tubes SS 316 wire HRB 90-95 Typical Hardness 70% Deposit Efficiency PRODUCT OVERVIEW SS316 is a 316 stainless steel wire specifically designed for arc spraying. It produces a dense, well-bonded coating with excellent machinability and wear and corrosion resistance. SS316 is widely used for machine element repair, dimensional restoration and wear resistance applications. It has high shrink characteristics and should not be used for coatings over 0.075 inches thick.

OCr25Al5 Thermal Spray Wire 6300 psi Bond Strength 100-200 Amperage PRODUCT OVERVIEW OCr25Al5 is an iron chrome aluminum alloy wire specifically designed for arc spraying. It produces dense, well-bonded coatings with excellent wear and high temperature oxidation resistance. It is widely used for machine element repair and dimensional res toration applications. OCr25Al5’s low shrink characteristic alloys increased coating thickness. OCr25Al5 is machinable. TYPICAL DEPOSIT

Annealed Status NiAl95/5 wire DIN 300 Spool For Thermal Spraying NIAl alloy solid wire Our company use Vaccum furnace and casting control to mak the NiAl alloy solid wire, it is specially used for arc spray boning layer. This wire has stable chemical composition, low oxgen and high bonding strength Chemical Composition Coating Strength (Mpa) Melting temp (℃) Coating Hardness(HRC) Ni95%Al5% 65-68 1010 23-25 Applying technique: Arc spray Specification of wire: 1.6mm, 2.0mm,

In713C refers to Inco713C, In713LC, belongs to nickel based alloys, usually delivered as cast. It is a γ' phase precipitation hardening cast superalloy having good creep strength, thermal fatigue properties and oxidation resistance below 900℃(1652℉). In713C| Inconel 713 Alloy Chemical Composition C Cr Ni Mo Al Ti Fe Nb B Zr Mn Si P S Pb Bi Min 0.08 11.5 Balance 3.8 5.5 0.5 1.8 0.008 0.06 Max 0.16 13.5 4.8 6.4 1.0 1.0 2.5 0.020 0.15 0.5 0.5 0.015 0.01 0.001 0.0001 In713C|

Waspaloy is Ni-Cr-Co based superalloy.Excellent mechanical properties below 980 ° C (1800 ° F), high strength and oxidation resistance at 760-870 ° C (1400-1600 ° F). Its strength is superior to that of alloy 718 at temperature above 1200-1300℉(650-750℃), and is generally comparable to Haynes R-41 alloy. Waspaloy Material Composition C Cr Mo Ni Co Al Ti Fe Si Mn P S B Zr Cu 0.03-0.1 18-21 3.5-5 Balance 12-15 1.2-1.6 2.75-3.25 ≤2 ≤0.15 ≤0.1 ≤0.015 ≤0.015 0.003-0.01 0.02-0.08

Nimonic 80A refers to alloy 80A, UNS N07080 belongs to nickel-chromium alloy. It offers high creep resistance and oxidation resistance from 650-850℃(1202-1562℉). The Al and Ti content makes alloy 80A γ’ dispersion-strengthened. Alloy 80A | Nimonic 80A Chemical Composition 　 Ni Fe Mn C Si S Cr Al Ti Min Balance 　 　 　 　 　 18 0.5 1.8 Max Balance 3 1 0.1 1 0.015 21 1.8 2.7 Alloy 80A | Nimonic 80A Mechanical Property ASTM B637 Alloy 80A solution+stabilization+precipitation harden

AWS 5.14 ERNiCrMo-3 refers to Inconel 625. It maintains stable mechanical property from crystallization to high temperature-980℃(1796℉). The most valuable property of Inconel 625|ERNiCrMo-3 is its strong resistance to pitting, crevice corrosion and stress corrosion generated by oxidation and reducing acid. AWS 5.14 ERNiCrMo-3 Chemical Composition C Mn Fe P S Si Cu Ni Co Al Ti Cr Nb+Ta Mo V W Others 0.1 0.5 5 0.02 0.015 0.50 0.5 ≥58.0 / 0.4 0.4 20.0-23.0 3.15-4.15 8.0-10.0 / /

OHMALLOY NiAl95/5 Thermal Spray Wire NiAl95/5 is a premium solid wire specifically engineered for arc spray systems, certified to ISO/CE standards. Available in 1.6mm and 2mm diameters. Product Overview This self-bonding wire adheres to most materials with minimal surface preparation. Achieves bond strengths exceeding 9000 psi on clean surfaces, with potential increases up to 10,000 psi through surface roughening. Excellent resistance to high temperature oxidation, abrasion,

ERNiCrMo-4 2.5mm Dia Bright Electrode Wire Nickel-based alloy welding wire with 27% elongation, specifically designed for welding C-276 and Ni-Cr-Mo alloys. Features excellent welding performance, beautiful weld formation, and deposited metal with superior comprehensive mechanical properties. Product Specifications Common Names: Oxford Alloy® 625 FM625 Techalloy 625 Standards: AWS 5.14 Class ERNiCrMo-3 UNS N06625 Werkstoff Nr.2.4831 ISO SNi6625 Chemical Composition (%) C Si