Led Aircraft Warning Lights

Medium Intensity LED Aircraft Warning Light GPS Synchronized Flash for Wind Turbine OB864 PLUSAFE aircraft warning light led compliance to FAA L864 type and ICAO medium intensity type B. The lights can used for navigation aids for masts. The model is OB864 Medium Intensity Type B OB864 Obstacle Light used to increase conspicuity of obstructions at nighttime. This is a flashing type produce aviation red color 2000cd beam. Medium intensity LED obstruction lights are used in

L864 Medium intensity B Aircraft Warning Light Flashing 2000cd Nighttime for Masts OB864 PLUSAFE aircraft warning light led compliance to FAA L864 type and ICAO medium intensity type B. The lights can used for navigation aids for masts. The model is OB864 Medium Intensity Type B OB864 Obstacle Light used to increase conspicuity of obstructions at nighttime. This is a flashing type produce aviation red color 2000cd beam. Medium intensity LED obstruction lights are used in

Easy Maintenance Navigation Aids LED Beacon 2000cd Intensity L864 Type Difference between OB66 AND OB864. OB864 improves the maintenance advantage, it designs from a concept of easy maintenance of LED part and electronic part. The light always mounted on very high place hard to handle to fix. Once maintenance, OB864 will be more easy to handle with a "handle" and just open the lock can fix the light. The model is OB66 Medium Intensity Type B Obstacle Light used to increase

Red Color Nighttime Steady Burning Aircraft Warning Beacon LED 2000 Candela Advantages: Efficient secondary optics is induced to generate Lens effect for proper light beam in horizontal plane and arrest unnecessary light dispersion in vertical plane as required by the lights specifications. High quality Aviation Red colour is directly emitted by the lamps thus eliminating the need for any additional colour filters, which otherwise gets faded due to UV radiation of sun.

Failure Alarm Led Aircraft Warning Lights / C Air Obstacle Light Fixed Aviation Red The model is OB864 Medium Intensity Type C Obstacle Light used to increase conspicuity of obstructions at nighttime. This is a steady burning type produce aviation red color 2000cd beam. Medium intensity LED obstruction lights are used in places where the structure is more than 45 meters high, above the ground level. With a life span of 100,000 hours, Plusafe medium intensity Aviation

LED SS316L Housing High intensity Type B Obstruction Lighting for Pylons The study shows that must have medium intensity type to shows the pylons of high voltage cable or wires. The high intensity type B obstacle lighting is recommended using. Specifications: Parameter Light Characteristics International standard High Intensity Type B ; ICAO Annex14 Volume I;Chapter6 Light source LED Color White Lifespan of LED 100,000hours (decay less than 20%) Light intensity Compliance to

Daytime and Nighttime Air Obstruction Lighting System Galvanized Optical PC Lens OB60-W&R this model is a dual type of Medium intensity type A&B. Together 2 lamps produce an effective light intensity of 20000cd white at daytime and 2000cd red at nighttime. ICAO and FAA recommend: Where, in the opinion of the appropriate authority, the use of high-intensity obstacle lights, type A or B, or medium intensity obstacle lights, Type A, at night may duzzle pilots in the vicinity of

Aluminum Alloy Housing LED Operated High Intensity Type A for Power Plant When super high building or structure needs multi-levels of high intensity type A and placed not less than 105meters in interval. When use medium intensity system required marked painting. Option for easy maintenance Custom solution for power plant applications: The chimney is very high and no ladder lead to top. The light can be customized seprate model solutions: LED Light Box part and other power

Standby ICAO Medium Intensity Type C Steady Burning 2000cd Both The lamp works under ICAO medium intensity type C fixed model. Both lamps work 2000cd red each. Specifications: Parameter Light Characteristics International standard ICAO Annex14 VolumeI;Chapter6 Medium Intensity Type C Light source LED Color Red Lifespan of LED 100,000hours (decay less than 20%) Light intensity Compliance to ICAO Annex14 photometric; 2000cd Photo sensor sensitivity 50Lux Flash frequency steady

Dual Medium Intensity Type B Led Aircraft Warning Lights FAA L864 2000cd Durable Introduction&Advantages: The major advantage of having a Dual LED aviation warning lightis that when the lowermost lights fail, the lighting switches onto itsstandby lighting system. This eliminates the eventuality of a complete blackout, during an unlikely circuit failure. These high power Omni-directional obstruction lamps are low on power consumption, which enables the unit to be operated on

L856 LED High intensity Obstruction Light 200000cd - 20000cd - 2000cd ICAO Type A When super high building or structure needs multi-levels of high intensity type A and placed not less than 105meters in interval. When use medium intensity system required marked painting. Specifications: Parameter Light Characteristics International standard High Intensity Type A ; ICAO Annex14 Volume I;Chapter6 FAA AC150/5345-43G Light source LED Color White Lifespan of LED 100,000hours (decay

ICAO Medium Intensity Type B Led Aircraft Warning Lights 24 LEDs 2000cd Intesity 210mm Dia The model is OB66 Medium Intensity Type B Obstacle Light used to increase conspicuity of obstructions at nighttime. Always combined operate with low intensity type B.(Fixed Type). Specifications: Parameter Light Characteristics International standard FAA L864 ; ICAO Annex14 VolumeI;Chapter6 FAA AC150/5345-43G L864 Light source LED Color Red Lifespan of LED 100,000hours (decay less than

Dual Aviation Obstruction Lighting LED 24H 20000cd White 2000cd Red ICAO and FAA recommend: Where, in the opinion of the appropriate authority, the use of high-intensity obstacle lights, type A or B, or medium intensity obstacle lights, Type A, at night may duzzle pilots in the vicinity of an aerodrome (10KM radius) or cause significant environmental concerns, a dual obstacle lighting system shall be provided. Double Obstruction Light System Type A&C is also available.

Double Led Aircraft Warning Lights System Day and Night for 500ft Obstruction ICAO and FAA recommend: Where, in the opinion of the appropriate authority, the use of high-intensity obstacle lights, type A or B, or medium intensity obstacle lights, Type A, at night may duzzle pilots in the vicinity of an aerodrome (10KM radius) or cause significant environmental concerns, a dual obstacle lighting system shall be provided. Specifications: Parameter Light Characteristics

Clear / Red Dome Low Intensity Type A Led Aircraft Warning Lights Shock and Vibration Resistant This model is made of clear polycarbonate dome and housing casting aluminum material. The model fixed 10cd and flash 32cd. Specifications: Parameter Light Characteristics International standard ICAO Annex14 VolumeI;Chapter6 FAA AC150/5345-43G L810 Light source LED Color Red Lifespan of LED 100,000hours (decay10 Electrical Characteristics Operating Mode 220V AC; 48V DC available

L856 LED Daytime and Nighttime High intensity Obstruction Light Automatically Intensity Change When super high building or structure needs multi-levels of high intensity type A and placed not less than 105meters in interval. When use medium intensity system required marked painting. Specifications: Parameter Light Characteristics International standard High Intensity Type A ; ICAO Annex14 Volume I;Chapter6 FAA AC150/5345-43G Light source LED Color White Lifespan of LED 100

10km FAA Obstruction Lighting Double White and Red 150m Above , Tower Obstruction Lighting Double Aviation Obstruction System always recommended when the high intensity light may glare pilot at night. So use a double medium intensity Type A&C lighting system is a good way to use on 150meters above obstruction and not glare pilots nearby airports. pecifications: Parameter Light Characteristics International standard FAA L864 ; ICAO Annex14 VolumeI;Chapter6 FAA AC150/5345-43G

ICAO Red Fixed Airplane Warning Lights for 45 Meters Above Stack Specifications: Parameter Light Characteristics International standard FAA L864 ; ICAO Annex14 VolumeI;Chapter6 Light source LED Color Red Lifespan of LED 100,000hours (decay less than 20%) Light intensity Compliance to ICAO Annex14 photometric; 2000cd Photo sensor sensitivity 50Lux Flash frequency Fixed Vertical Angle 4 Electrical Characteristics Operating Mode 110V to 240V AC; 24V to 55V DC available Power

24 Hours White Fresnel Led Aircraft Warning Lights Flashing for Antenna Marking Specifications: Parameter Light Characteristics International standard ICAO Annex14 VolumeI;Chapter6 Light source Strobe Xenon Color White Lifespan of LED 100,000,000 Flashers Light intensity 1600cd Above Photo sensor sensitivity 50Lux Flash frequency 40 fpm Vertical Angle >4 Electrical Characteristics Operating Mode 220V AC, 48V DC Power Consumption 20W Physical Characteristics Body/Base

ICAO Red Steady Burning Aircraft Obstacle Light Medium Intensity Type C Specifications: Parameter Light Characteristics International standard FAA L864 ; ICAO Annex14 VolumeI;Chapter6 Light source LED Color Red Lifespan of LED 100,000hours (decay less than 20%) Light intensity Compliance to ICAO Annex14 photometric; 2000cd Photo sensor sensitivity 50Lux Flash frequency Fixed Vertical Angle 4 Electrical Characteristics Operating Mode 110V to 240V AC; 24V to 55V DC available