Marine mooring equipment

Airbag ship launching technology overcomes restrictions of traditional ship launching methods and can enhance the building and repairing capacity of shipyards. Our ship launching airbags are manufactured and tested in comply with ISO 14409 “Ships and marine technology – ship launching air bags“, certificated by CCS, LR, DNV. Diameter Working pressure Working height Bearing capacity per unit length KN/m Bearing capacity per unit length ton/m D=1.0m 0.20 Mpa 0.6m 0.5m 125.76

Ship Launching Airbags, also known as roller bags or ship launching balloon, are made of heavy-duty synthetic-tire-cord layers with inner and out rubber layers in long cylindrical balloon shape. It can be used for the ship launching or ship landing of tanker, tugboat or barges, carrying vessel, carrier, ferry and other special vessels (AHTS, DSV) and so on. Airbag ship launching technology overcomes restrictions of traditional ship launching methods and can enhance the

The Super Cell Rubber Fender is a well established fender type. This fender has a hollow cylindrical body with fully rubber-imbedded mounting flanges and is designed to deflect in an axial direction. Characteristic Good energy absorption to reaction force ratio (E / R ) Integrated and fully-embedded fender flanges make assembly & installation simple Good shear force resistance due to the large diameter of the fender flanges Availability in heights between 630 to 3,000 mm.

Cone Fenders with the conical body shape and frontal mount steel frame are the latest generation product of “cell” type fenders, with optimal performance and efficiency. They provide an excellent energy capability with a low reaction (their designed compress deformation rise from 52.5% to 70% while the reaction force is unchanged.). The conical design and circular mounting base make them extremely stable fenders especially where angular performance is required. Characteristic

V Type Rubber Fender usually use at ports and docks on quay walls and other berthing structures. They absorb the kinetic energy of a berthing vessel and thus prevent damage to the vessel or the berthing structure.CharacteristicsModerate action force and high capability of energy absorptionConvenient installation and firm structureThe fender is applicable to all kinds of docks quays and shipsSpecification TypeH(mm)L(mm)L0(mm)B(mm)B1(mm)B2(mm)B3(mm)c(mm)d(mm)V300x10003001000115

General: The Sling Type Pneumatic Fender is a kind of fenders without chain & tire net made according to ISO 17357 International Standard Nominal size mm Pneumatic 50 Guaranteed energy absorption (KN.M) Pneumatic 50 Reaction force at GEA deflection (KN) Pneumatic 50 Hull pressure at GEA deflection (KN) Pneumatic 80 Guaranteed energy absorption (KN.M) Pneumatic 80 Reactionforce at GEA deflection (KN) Pneumatic 80 Hull pressureat GEA deflection (KN) Dia x Length 60% deflection

Foam filled fenders are fabricated with closed cell resilient foam filled, with tough polyurethane elastomer skin, reinforced with nylon filament. Foam Filled Fenders Construction A. Foam filled fenders are filled with highest quality 100% closedcell foam. This specific foam can provide high energy absorption with relatively low reaction force. Even the skin was punctured, it also is unsinkable without absorbing water. With our unique laminating process, each foam core is

Specification (Unit: mm) Type Dimension(mm) H B L Holes Q c h D d JD150x150x1000 JD200x200x1000 150 200 150 200 1000 1000 3 3 350 350 150 150 25 35 40 55 24 30 JD200x200x3000 200 200 3000 8 400 100 35 55 30 JD250x250x1000 250 250 1000 3 350 150 35 60 30 JD250x250x3000 250 250 3000 8 400 100 35 60 30 JD300x300x1000 300 300 1000 3 350 150 40 65 32 JD300x300x3000 300 300 3000 8 400 100 40 65 32 JD300x360x1000 300 360 1000 3 350 150 40 65 32 JD300x360x3000 300 360 3000 8 400 100

Advantages: a. Higher volumes of energy absorption and reaction force than those of cylindrical fender b. Compact size and expedient installation Specification (Unit: mm) Type Dimension(mm) H B L Holes Q c h D d JD150x150x1000 JD200x200x1000 150 200 150 200 1000 1000 3 3 350 350 150 150 25 35 40 55 24 30 JD200x200x3000 200 200 3000 8 400 100 35 55 30 JD250x250x1000 250 250 1000 3 350 150 35 60 30 JD250x250x3000 250 250 3000 8 400 100 35 60 30 JD300x300x1000 300 300 1000 3 350

Buoder make pneumatic floating Yokohama fenders with 50kPa (pneumatic 50) and 80kPa (pneumatic 80) initial pressure. The internal pressure, endurable pressure, safety-valve setting pressure and hydraulic test pressure are also in compliance with the requirements of ISO 17357:2014 Features 1. High energy absorption and low reaction force and surface pressure; 2. No decline in the rate of energy absorption when obliquely compressed, under normal circumstances, and uniform

Features 1. High energy absorption and low reaction force and surface pressure; 2. No decline in the rate of energy absorption when obliquely compressed, under normal circumstances, and uniform surface pressure for any contact area; 3. Low reaction force to prevent damage from repeated impacts against the hull of ship, quay, jetty or mooring rope; 4. Ability to float and rise and fall with the ebb and flow of tides and the movements of a ship; 5. High standard of uniform

Marine pneumatic Rubber FenderPneumatic rubber fender1.Rubber fender is with the use of high quality synthetic rubber and LianZiXian polyamide2.Good ageing resistance performance character is tics.Performance characteristics1 using compressed air as damping medium, the rubber can transform flexibly under pressure, with large contact area, small reaction and absorb large amount of energy.2 when berthing, the ship is almost at a certain angle, the pneumatic rubber fender can

Mooring synthetic fiber rope reel suitable for fiber rope diameter 20-75mm rope length per roll:110m - 250m or we can also customize it per to your requsts some normal sizes as bellow Name Type No. Wire Rope(mm) Wire Long(mm) AW,A AW13 A13 13 120 Type A AW17 A17 17 190 Steel Wire Rope AW21 A21 20.5 180 (W-Nohandle) AW26 A26 26 190 AW32 A32 32 190 Type B B B39 39 210 B48 47.5 230 Type C C C56 56 300

suitable for fiber rope diameter 20-75mm rope length per roll:110m - 250m or we can also customize it per to your requsts some normal sizes as bellow Name Type No. Wire Rope(mm) Wire Long(mm) AW,A AW13 A13 13 120 Type A AW17 A17 17 190 Steel Wire Rope AW21 A21 20.5 180 (W-Nohandle) AW26 A26 26 190 AW32 A32 32 190 Type B B B39 39 210 B48 47.5 230 Type C C C56 56 300

*Absorb more energy,less reverse impact on the ships *More flexible ,easy installation *Long term service life *Not being bent out of shape under pressure *Good air tightness,safety and reliability *High shock absorption,low counterforce and enhance port ability *Produce according to ISO17357:2002 completely *Many different sizes and shape available *Pass CCS,DNV,ABS *Durable, practical and economical *Good quality have been checked by many buyers *Optional tire and chain,can

SpecificationsPneumatic rubber fender1.Rubber fender is with the use of high quality synthetic rubber and LianZiXian polyamide2.Good ageing resistance performance character is tics.Performance characteristics1 using compressed air as damping medium, the rubber can transform flexibly under pressure, with large contact area, small reaction and absorb large amount of energy.2 when berthing, the ship is almost at a certain angle, the pneumatic rubber fender can realize contact in

Pneumatic Rubber Fenders---we can customize the size per to your needs. All accessories are available. Competitive price for you .Pneumatic Rubber Fenders can be easily handled and installed with guy-rope or guy-chain because of its light weight. It can resist the shearing force and maintain energy absorption level under inclined compression up to 15 degrees. Meanwhile, provide the low and comparatively even hull pressure.SpecificationsPneumatic 50KPaPneumatic 80KPaDiameter

HDPE Dredging Pipe Application: 1. Transport sad and dirty water from the river. 2. Used to conveyor mud and from the pond 3. Used in to deliver slurry, mud, sad etc in dredging projects HDPE Dredging Pipe Properties: Specific Gravity, g/cm3, 20(C): 0.941-0.965 Longitudinal Reversion, % (110(C)): =20 Extension Rate at Break. %: >=350 Hydraulic Pressure Test: 20(C), Hoop Stress is 12.4Mpa, 100h: No Failure. 80(C), Hoop Stress is 5.5Mpa, 165h: No Failure. 80(C), Hoop Stress is

Application: 1 Municipal water supply 2 Commercial & Residential water supply 3 Industrial liquids transportation 4 Sewage treatment 5 for agriculture irrigatio 6 for Gas supply 7 for floor heating 8 for underground source heat pump HDPE Dredge Pipe Specification Standar:GB/T13663-2000 DN EN SDR26 EN SDR21 EN SDR17 EN SDR13.6 EN SDR11 Pressure Pressure Pressure Pressure Pressure (mm) (mm) (Mpa) (mm) (Mpa) (mm) (Mpa) (mm) (Mpa) (mm) (Mpa) 20 2.0 0.6 2.0 0.8 2.0 1.0 2.0 1.25 2

HDPE dredge pipes for sea dredging, HDPE solid wall pipe Features: 1. Long working life. Minimum 50 years life under nomal conditions. 2. Hygiene. PE pipe are nontoxic, without the composition of heavy metal additives. No scale, not breeding germ, no second pollution to the potable water. 3. High resistance to attack from various types of chemicals. No electrochemical corrosion. 4. Smooth internal surface. Extremely low friction coefficient. Improved capability for media to