Marine mooring equipment

Rubber fender with high energy absorption and lower reaction force will maximize rubber fender efficiency. Conform to Macgregor or TTS or any other international standard High Efficiency: Rubber fender with high energy absorption and lower reaction force will maximize rubber fender efficiency. Easy to compress fender and high elasticity will increase the shock absorption speed Fender suitable for areas with large or small tides Fender performance is adjustable by varying

(1)High E/R.H(energy absorption/reaction force. product height) Value Compare with general cell rubber fenders, super cell rubber fenders have 15% higher E/R.H value. The general cell rubber fender has 0.375~0.385 E/R.H, while the super one has 0.43~0.44 normally. (2) More Reasonable Structure Compare with normal rubber fender, super cell rubber is more reasonable in the structure design. A smooth joint is adopted between the fender buffer and flange to reduce the stress

Ease of handling and good buoyancy Low surface pressure with low reaction and High Energy Absorption Rate Easy installation & maintenance free Exceptional Compressibility and elasticity Purpose apt with the Large and small tides Pneumatic fenders facilitate large stand-off Model B(mm) b(mm) c(mm) d(mm) H (mm) h (mm) S(mm) SA-A200H 400 320 145 128 200 30 260 SA-A250H 500 410 175 160 250 33 300 SA-A300H 600 490 225 196 300 33 300 SA-A400H 800 670 300 260 400 40 360 SA-A500H

Super Arch Rubber Fender 1.Material: rubber 2.Certificate: ISO9001:2000 3.High quality,Low price... Super Arch Rubber Fender Super arch rubber fender are tough and reliable, simple and long lasting. Providing trouble-free service for a wide varity of berthing even under the most severe conditions. Super arch rubber fender has the better stablity and stronger attachment to the supporting structure than the traditional arch/ v rubber fender. It can be fitted vertically or

super arch type marine rubber fender embedded steel mount and nut on the top of fender,it connect front panel,UHMW-PE face pad installed outside of front panel,it lower frictionfactor between vessel and fender, invoid of vessel damage,and raise the utility of fender life Ease of handling and good buoyancy Low surface pressure with low reaction and High Energy Absorption Rate Easy installation & maintenance free Exceptional Compressibility and elasticity Purpose apt with the

Ease of handling and good buoyancy Low surface pressure with low reaction and High Energy Absorption Rate These fenders offer excellent energy absorption characteristic and do have a linear load deflection characteristic. They are very easy to install, remove and handle for various applications. it won’t compression deformation under the pressure ♦ Environmental protection, it won't bring the pollution problems to our environment size D×L(m) Initial pressure(Po) is 0.05MPa

U2 Marine Chain Link Black Painted Kenter Shackle Material: Carbon steel, alloy steel, stainless steel Production Standards: American standard Surface:H.D.G, galvanized , zinc plated, painting, self colored Process: Drop forged Packing: bag, carton, pallet. Dimension: Dia. Proof load(KN) Breaking load(KN) Weight MM U1 U2 U3 U1 U2 U3 KG/M 11 36 52 72 52 72 102 2.65 12.5 46 66 92 66 92 132 3.42 14 58 82 116 82 116 165 4.29 16 76 107 150 107 150 216 5.61 17.5 89 127 179 127 179

we supply ***Studless anchor chain ***Grade 1, Grade 2 stud link anchor chain (11mm-162mm) ***Grade 3 stud link anchor chain ***Anchor chain accessories: kenter shackle, end shackle, swivel pieces etc. ***Certificate: ABS, LR, BV, NK, DNV, RINA, RS, IRS,CCS etc. Accessories and anchor: Kenter Shackles, 'D' Type Joining Shackles, Anchor Shackles (End Shackles), Swivel Adapters; Anchors such as Hall Anchor, Spec Anchor, Pool Anchor, Delta Anchor, AC-14 Anchor, Stockless Anchor,

PP/Nylon/Polyester Rope 1. Material: PP/Nylon/Polyester 2. Dia: 28mm--96mm 3. Certificates: CCS, ABS, LR, NK, BV, GL, RS, DNV, KR 4. Advantages: High strength, light weight, easy operation, soft and wearing resisting. 5. Use: Widely used in shipbuilding, ocean transportation, ship towing, sea aid, heavy-duty hoisting, national defense warship and vessel etc. Our rope has passed CCS, ABS, BV, LR, GL, DNV, RS, NK etc. Shipping society certificate. Specification PA Multifilament

Saving the investment of the shipyard construction Simple operation,saving of labor and work hours Environment friendly Applications Marine platform launching,ship upgrading or docking(up to land), jack-up heavy, ship segments combination, salvage, sunken vessel raising and other engineering works. PARAMETERS AND PERFORMANCE OF THE MARINE AIR BAG Model Diameter Initial pressure (kpa) rated working pressure (kpa) a deformation rate of 70%, internal pressure equivalent to the

Special attention when use airbags 1) Strictly control the use of pressure 2) Surface contact with the air bag cannot have sharply pointed a blur, prevent prick the airbag 3) Try to avoid air bag length direction of distortion 4) Long time not to use or repaired airbag, pressure test is required before using again; Often use airbags,test once a year. 5) Drag the airbag on the ground balloon is prohibited Marine airbag also known as rubber airbag, ship launching airbag, ship

buy 10 years using life Marine barge airbags for shipyard use often in Batam shipyard Product Introduction Marine airbag also known as rubber airbag, ship launching airbag, ship salvage airbag, inflatable airbag, ship lifting airbag, air balloon, made by rubber & multi-layer of rubber-dipped type fabric. Airbags are widely used in launching and landing ship/ boat/vessel, lifting and moving heavy goods, salvaging stranded boats. Marine airbags are very popular with shipyard,

HDPE sand dredging pipe performance: HDPE Sand Delivery Pipe of weight is light, only one-eighth of steel pipe, Through activities flange bolts to connect, installation and dismantle, transportation are convenient, shorten the time, improve efficiency, so as to avoid the pipeline welding together to repair and replacement pipe time-consuming faults after external damage. HDPE Sand Delivery Pipe has good flexibility, tensile strength and elastic, pipe extrusion, pack, it doesn

Features: 1. High abrasion resistance and corrosion resistance. 2. Good wear resistance, long service life. 3. Light weight, 1/8 weight of steel pipe, easy for transportation and installation. 4. Stub ends with steel flanges,bolts and nuts for connection, easy for installation and disassembly. 5. Smooth inner wall, large flow capacity. 6. Excellent flexibility; good stress crack resistance; good impact resistance; workable at tempreture -40˜40°c. Applications: 1. Trasnport

• Made from PE 100 precompounded virgin material • Light Weight - Easy installation • Superb Flexibility for rough sea conditions • Excellent Weathering & UV resistance • Ideal in combination with Denialink PE floats for dredging – and sand winning applications. • Pressure rating of PN 4 up to PN 16. • Various diameters(20-1600mm) • All lengths, up to 12 metres • Color: Black Features: 1. High abrasion resistance and corrosion resistance. 2. Good wear resistance, long service

1.) Material: 100% Virgin compounded HDPE material. 2.) Nominal diameter: 8 inch, 10 inch, 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, 22inch, 24 inch, 26 inch. 3.) Pressure rating: SDR17, PN10, 1.0MPa. 4.) Color. Black with blue strips. 5.) Certificate: ISO9001, ISO14001,Gost, CE, ROHS, SGS and so on 6.) Standard: ISO4427, GB/T13663-2000, GB/T13663.2-2005, DIN8074-99, EN13244, EN12201, AS/NZ4130, GOST18599-2001 7.) Thickness: according to client's requirement. 8.) Length:

UHMWPE Pipes Sizes: 6’‘, 8’‘,10’‘, 12’‘,14’‘, 16’‘, 18’‘,20’‘,24’‘,26’‘,28’‘,30’‘. UHMWPE Navigation Buoy Size: CMB1.0M, CMB1.2M, CMB1.5M, CMB1.8M, CMB2.1M, CMB2.4M, CMB3.0M Specification table Wear resistance of contrast No. Item Requirements 1 20 ℃ to quiet hydraulic strength(hoop stress 12.4Mpa,100h) No burst, No leak 2 80 ℃ to quiet hydraulic strength(hoop stress 5.5Mpa,165h) No burst, No leak 3 80 ℃ to static strngth(hoop stress 5.0Mpa,1000h) No burst, No leak 4 Breaking

HDPE pipe Specification: Material: PE100 O.D.: 50mm-1000mm Color: black SDR rating: SDR26, SDR21, SDR17, SDR13.6, SDR11 Specification table O.D. (mm) SDR26 SDR21 SDR17 SDR13.6 SDR11 0.6 0.8 1.0 1.25 1.6 140 6 7 8 10 13 160 7.5 8 10 12 15 180 7.5 9 11 13 17 200 8 10 12 15 18 225 9 11 13 17 21 250 10 12 15 18 23 280 11 13 17 21 25 315 12 15 19 23 29 330 13 16 20 24 30 350 14 17 21 26 32 400 15 19 24 29 36 425 15 20 25 33 42 450 17 21 27 34 45 500 19 23 30 37 48 530 20 24 31 38

Brief introduction: 1.Using: Dredging floater for hdpe pipe for dredging cutter-suction ship-discharge mud, sand and slurry.. 2. Material : 100% new virgin material MDPE Hull +closed-cell PU foam filled 3. One set is two halves. Halves connected by galvanized bolts, nuts and washers. 4. Wear-resistance, resistance to the wind and waves, can adapt to bad weather The characteristics of HDPE floating: 1.Light weight, easy for installation and movement 2.The costs and performance

Introduction of Pipe Floater 1.Material:MDPE 2.Color:orange and other color on request 3.Floater length:800mm--2500mm 4.Floater OD:500mm---2200mm Specification Table of Pipe Floater Pipe I.D. Thickness of Pipe Float I.D. Float O.D. Float Length Thickness of Plastic Net Buoyancy mm mm mm mm mm mm KGS/Float 200 6 220 500 800 7 200 285 6 300 700 1200 7 420 350 6 375 1100 1100 7 920 400 8 414 1100 1200 8 1020 414 8 430 1200 1200 8 1200 450 8 480 1300 1300 8 1500 500 10 580 1400