Camera Power Cable

Alvin's Cables 8K HDMI 2.1 Cable 48Gbps High-Speed Ultra-Thin HDMI Cable for Atomos Ninja-V 4K-60P 6K-Record, Z-CAM, for Canon-C70, for Sony A7S3|A9|A74 1m|39.4inches 【Flexible & Durable】Adopting TPE material as outer layer, this 8K 2.1 coaxial HDMI cable is more environment-friendly and higher-elastic, making it not easy to knot and break. Featuring Φ2.4mm wire and only Φ1.87mm shielding core, this Ultra-thin HDMI cable is easy-bendable and more adaptable to your devices.

Alvin's Cables SmallHD Control-Cable for SMALLHD Focus PRO Monitor to RED DSMC2 Epic Scarlet Camera 5 Pin to 4 Pin Ctrl Cable 45cm| 18inches This cable is implanted with a chip, which makes controlling smoother and more secure. Control RED DSMC2/Epic/Scarlet cameras or RED KOMODO via KOMODO b-box from SmallHD monitor. Connects 5 pin plug to SMALLHD Focus PRO/OLED/ Cine 7/Indie 7/Indie Pro monitor; Connects 4 pin plug to RED Camera with 4 pin ctrl socket or KOMODO breakout-box

Alvin's Cables D-tap Splitter Cable Dtap Male to 4 Port D Tap Female Splitter Hub Power Cable for ARRI RED Teradek SmallHD SmallRig V-Mount|Gold-Mount Battery 40cm/15.7in D-tap splitter hub allows you to power multiple cameras and devices at the same time from V-Mount, Gold-Mount Battery or other power source with D-tap output. Featuring d-tap female sockets of different directions, the cable allows you to change the direction of dtap. The cable comes with a 1/4" screw,

Alvin’s Cables SDI-Protector for RED-Komodo SDI-Port-Protection-Cable Galvanic-Isolators Right-Angle BNC Male to Female 8Inch|20CM Blue This is a SDI-Port-Protection-Cable to prevent users from damaging the SDI port due to incorrect operational procedures. Intimate double-angled plugs design makes the cable exits from the side, so as not to block other jacks, making your device more concise. Please note, that SDI isolators can reduce signal quality and/or maximum cable length

Alvin's Cables Luxury D Tap to XLR 4 Pin Female Right Angle Power Cable for ARRI Camera Monitor Power your ARRI ALEXA Camera Monitor. Cable Length: 50cm in stock. We can customize cables with other length, please send a message to us if you need. Plug A: D-tap Male. Plug B: Right Angle XLR 4 Pin Female. Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

Power-Cable for Teradek|ARRI 2-Pin-Male to Reverse D-Tap Flexible Braided Cable 7CM Alvin's Cables This is for Teradek or ARRI (Please note this cable isn't for Bartech Focus Receiver, if you need it, please visit our store or contact us, thanks!) Reverse Dtap provides a more concise way to connect device when you want to put the V-mount battery in a special place. Braided cable is more flexible and thinner than original version. Plug A: Reverse D-tap Male; Plug B: 0B 2 Pin

Alvin’s Cables NP-FZ100 Dummy Battery to Ronin S Gimbal Power Coiled Cable for Sony Alpha A9II A9 A7RIV A7RIII A7III A7SIII A6600 Camera Power for Sony Alpha a9 II, a9, a7R IV, a7R III, a7 III, a6600 Cameras from DJI Ronin S. Largely prolong camera shooting hours or devices service time. Plug A: NP-FZ100 Dummy Battery; Plug B: 4 Pin Female. Unstretched length: 35cm/13.8inches,stretched length: 60cm/24inches. Every cable was tested to ensure that there are no short circuit, no

This run stop cable is designed to control RED DSMC2 Epic Scarlet Camera by triggering run stop function of Teradek RT LATITUDE MDR. Plug 4 Pin into CTRL port of Teradek RT LATITUDE, and plug 4 Pin into Ctrl Port of RED DSMC2 Camera. Plug A: Straight 00B 4 Pin Male. Plug B: Straight 00B 4 Pin Male. Cable Length: 45CM/ 18in. We can customize cables with other length, if you need custom cables, please send a message to us before making the order. Every cable was tested to

Alvin's Cables USB-C Type-c to LP-E6P Dummy Battery Power Coiled Cable for Canon EOS R5 Mark ll/ R5/ R6 Mark ll/ R6/ R7/ R Camera This LP-E6P Dummy Battery is designed to power for Canon EOS R5 Mark ll/ R5/ R6 Mark ll/ R6/ R7/ R/ EOS 5D Mark IV/5D Mark lll/ 5DS/ 5DS R/ 5D Mark ll/ 6D Mark ll/ 6D/ 7D Mark ll/ 7D/ 90D/ 80D/ 70D/ 60D/ 60Da. The USB-C interface can work with PD supply fast chargers such as 12V, 15V, 20V, or power bank with PD protocol output. Plug A: LP-E6P dummy

Alvin's Cables Dtap to Right Angle USB-C Power Cable for DJI Focus Pro Motor, Ultra Soft D-tap to Type-C Enhanced Power for Tilta Nucleus Nano II Wireless Lens Control Motor 【Compatibility】Power for DJI Focus Pro Motor or Nucleus Nano II Wireless Lens Control Motor with the D-Tap to USB-C Power Cable, designed for higher voltage and stronger torque. Featuring a 14.8V D-Tap connection, it ensures stable power delivery from DTap sources. Get enhanced performance and reliability

Alvin's Cables Dtap to Right Angle USB C Power Cable, 2ft Ultra Soft & Flexible Dtap to Type C Enhanced Power for Tilta Nucleus Nano II Wireless Lens Control Motors 【Optimized for Nucleus Nano II】Power your Nucleus Nano II Wireless Lens Control Motor with the Tilta D-Tap to USB-C Power Cable, designed for higher voltage and stronger torque. Featuring a 14.8V D-Tap connection, it ensures stable power delivery from DTap sources. Get enhanced performance and reliability compared

Alvin's Cables Dtap to USB-C Power Cable for DJI Focus Pro Motor, Ultra Soft D-tap to Type-C Enhanced Power Coiled for Tilta Nucleus Nano II Wireless Lens Control Motor 【Compatibility】Power for DJI Focus Pro Motor or Nucleus Nano II Wireless Lens Control Motor with the D-Tap to USB-C Power Cable, designed for higher voltage and stronger torque. Featuring a 14.8V D-Tap connection, it ensures stable power delivery from DTap sources. Get enhanced performance and reliability

Compatibility Alvin’s Cables LP-E6P Dummy Battery is compatible with Canon EOS R / Ra / R5 / R5C / R5 Mark II / R6 / R6 Mark II / R7 / 5D Mark II / 5D Mark III / 5D Mark IV / 5DS / 5DS R / 6D / 6D Mark II / 60D / 70D / 7D Mark II / 80D / 90D cameras. Continuous Power Supply A reliable replacement for Canon LP-E6P, LP-E6NH, LP-E6N, and LP-E6 batteries, this AC adapter kit delivers uninterrupted power to your camera—eliminating battery anxiety during extended shooting sessions.

This control cable is designed for DJI RS2 / RS3 / SC2 / SC / RS3 Mini stabilizers and is compatible with Sony A6300 / A6400 / A6500 / A7M3 / A7M4 / A7R3 / A7R4 / A7S3 cameras. Key Functions: Start / stop video recording Autofocus (half-press) Take photo (long-press) Optical zoom control (with compatible Power Zoom lens) Note: Due to Sony camera system limitations, this cable cannot adjust aperture, shutter speed, or ISO settings. Connector Types: Plug A: Right-Angle USB-C

This Control Cable is for DJI SC2/ RS2/ RS3/ RS3 Mini/ RS4 Stabilizer. Compatible with Canon 6D/ 6D2/ 5D3/ 7D/ 80D/ 70D/ 77D/ 700D/ 800D/ 750D/ 760D/ 600D. (Please note: it’s not for DJI Ronin SC/ Ronin S.) This Mini-USB to Type-C Cable supports starting/stopping video recording, and adjust camera aperture, shutter speed, and ISO settings. Half-press: Control, autofocus; Long-press: Take a photo; Short-press: Start/stop video recording. (Please Note: Due to the limitations of

This run-stop cable enables remote control of RED KOMODO / KOMODO-X / V-RAPTOR / V-RAPTOR XL cameras by triggering the run/stop function on Teradek RT MDR.X / MDR.S controllers and receivers. Connection Guide: Plug the 6-pin end into the CAM port of your Teradek RT device. Plug the 9-pin end into the EXT port of your RED DSMC3 camera. Connector Types: ✅ Plug A: 6-Pin Male (for Teradek CAM Port) ✅ Plug B: 9-Pin Male (for RED EXT Port) Cable Length: 50 cm / 19.7 in ✅ Custom

Alvin's Cables Tentacle Sync TRS 3.5mm Microphone Y-Cable for Camera/Mic, 30cm/12in This 3.5mm TRS Y-splitter cable enables you to connect your Tentacle SYNC E, ORIGINAL Timecode Generator, TRACK E Audio Recorder, or TIMEBAR to both a camera’s 3.5mm TRS audio input and an external microphone simultaneously. Key Feature: It feeds audio timecode into the camera’s left channel while recording external microphone audio on the right channel. Connector Configuration: ✅ Plug A:

Alvin's Cables Teradek RT to ARRI/Sony 6-Pin to RS Run Stop Cable, 30cm/12in This run-stop cable allows you to control cameras equipped with an RS 3-pin port by triggering the run/stop function on Teradek RT MDR.X / MDR.S controllers and receivers. Connections: Plug the 6-pin end into the CAM port of your Teradek RT device. Plug the 3-pin end into the RS port of your ARRI Alexa LF / Mini LF / Alexa 35 / Alexa SXT or Sony Venice / Venice 2 camera. Connector Types: ✅ Plug A:

Alvin's Cables RØDE Wireless GO II/MixPre 3.5mm TRS to Dual XLR M Unbalanced Breakout Cable 45cm ✅ Compatibility & Applications Connect a 3.5mm TRS output from RØDE Wireless GO II/Pro, DJI wireless microphones, or other dual-channel wireless systems directly to cameras and recorders featuring dual mini XLR inputs — including Canon EOS C70/C400, BMPCC 4K/6K Pro, and Blackmagic Video Assist. ✅ Dual-Channel Breakout Connection Split a single stereo 3.5mm TRS signal into two

Alvin's Cables RØDE Wireless GO II/MixPre 3.5mm TRS to Dual XLR M Unbalanced Breakout Cable 45cm ✅ Compatibility & Applications This cable is designed to connect devices with a 3.5mm TRS jack — including cameras, DSLRs, RØDE Wireless GO II/Pro mics, and DJI wireless mics — to professional audio equipment with dual XLR inputs. Compatible with Sound Devices MixPre, Zoom F6, mixers, audio recorders, speakers, and monitors. ✅ Unbalanced Stereo-to-Mono Signal Splitting Converts a