Industrial Automation Sensors

Omron E2E-X10D1-M1G M30 Shielded Proximity Sensor Overview The Omron E2E-X10D1-M1G is an M30 inductive proximity sensor designed for reliable metal detection in industrial machinery that needs a straightforward DC 2-wire interface and a connector-based installation format. Within the E2E family, this specification set aligns with a shielded, embeddable, normally open configuration with a 10 mm sensing distance, making it a practical choice for conveyors, machine frames,

Omron E2E-X7D1-N | Inductive Proximity Sensor — M18, 7mm, DC 2-Wire NO, 10–30VDC, 500Hz, IP67, Shielded Overview The Omron E2E-X7D1-N is a shielded M18 inductive proximity sensor wired as a DC 2-wire device — no separate power supply conductor, just two wires connecting the sensor into the load circuit between the DC positive supply and the load. It detects ferrous metal targets at up to 7mm and switches a 3–100mA load at up to 500Hz, with 0.8mA leakage in the off state and

Omron E2E-X7D1-M1G | Inductive Proximity Sensor — M18 Shielded, 7mm NO, DC 2-Wire, Stainless Steel, IP67/IP69K, M12 Connector, Heat & Detergent Resistant Overview The Omron E2E-X7D1-M1G is a shielded M18 inductive proximity sensor with 7mm sensing distance and DC 2-wire normally open output, connecting via an M12 IEC-pinout field connector. Its stainless steel housing, IP67/IP69K dual protection rating, and resistance to heat and industrial detergents set it apart from

Omron E2E-X4MD1 | Inductive Proximity Sensor — M8 Unshielded, 4mm NO, DC 2-Wire, 10–30VDC, 1kHz, Dual LED, Stainless Steel, IP67, 2m Cable Overview The Omron E2E-X4MD1 is an M8 unshielded inductive proximity sensor delivering a 4mm sensing distance with DC 2-wire normally open output. In Omron's E2E sensor matrix, the "MD" designation identifies the unshielded (non-flush) M8 medium-range variant — the model where the M8 body's sensing capability is maximised by eliminating

Omron E2E-X3D1-N | Inductive Proximity Sensor — M12 Shielded, 3mm NO, DC 2-Wire, 10–30VDC, 1kHz, Dual LED, IP67 Oil-Proof, 2m Pre-Wired Cable Overview The Omron E2E-X3D1-N is an M12 shielded inductive proximity sensor with a 3mm sensing distance and DC 2-wire normally open output, pre-wired with a 2-metre oil-resistant PVC cable. It is the cable-type variant of the E2E-X3D1 sensor platform — "N" identifies the pre-wired construction without a field connector — making it the

Omron E2E-X2D2-N | Inductive Proximity Sensor — M8 Shielded, 2mm NC, DC 2-Wire, 10–30VDC, 1.5kHz, Stainless Steel, IP67 Oil-Proof, 2m Cable Overview The Omron E2E-X2D2-N is the normally closed variant of the E2E M8 shielded 2mm DC 2-wire sensor — the physical twin of the E2E-X2D1-N in every respect except the output state logic. Where the D1 variant opens its circuit when no target is present and closes it when a target is detected, the D2 conducts when idle and opens when

Omron E2E-X2D1-N-Z | Inductive Proximity Sensor — M8, 2mm, NPN 2-Wire NO, 10–30VDC, 1.5kHz, Stainless Steel, IP67 Overview The Omron E2E-X2D1-N-Z is a shielded M8 inductive proximity sensor with a stainless steel housing body, 2mm sensing distance, and NPN 2-wire normally open output on cable leads. Its 1.5kHz switching frequency — the specification that stands out most immediately — places it in a performance category above standard M8 sensors, making it the appropriate

Omron E2E-X2D1-N | Inductive Proximity Sensor — M8 Shielded, 2mm NO, DC 2-Wire, 10–30VDC, 1.5kHz, IP67, Oil-Resistant 2m Cable Overview The Omron E2E-X2D1-N is a shielded M8 inductive proximity sensor wired as a DC 2-wire normally open device, with a 2mm sensing distance and 1.5kHz switching frequency. The DC 2-wire circuit means just two wires — the sensor connects in series with the load between the DC positive supply and the return, requiring no separate power conductor.

OMRON Proximity Switch Sensor E2E-X1R5F1 E2EX1R5F1 Product Overview The Omron E2E-X1R5F1 is a shielded M8 inductive proximity sensor in the E2E series, producing a PNP sourcing output on a 3-wire circuit. Its 1.5mm sensing distance, 2kHz switching frequency, and stainless steel housing combine in a package that threads into an M8 hole to handle the fastest, tightest detection tasks in the E2E standard range. The 2kHz performance specification sets this model apart from most

Omron Proximity Switch E2E-X1R5E1 E2EX1R5E1 Product Overview The Omron E2E-X1R5E1 is a shielded M8 inductive proximity sensor delivering a 1.5mm nominal sensing distance with a 3-wire NPN normally open output on a 12-24V DC supply. At 2kHz switching frequency, it sits at the fast end of the standard E2E shielded M8 range—ideal for applications where the detection rate exceeds what a lower-frequency sensor can reliably track, while maintaining the familiar E2E series

Omron D4C-3202 | Compact Enclosed Limit Switch — Roller Plunger, SPDT, 4A/30V DC, IP67 Triple-Sealed, Red LED, VCTF Oil-Resistant Cable 3m Overview The Omron D4C-3202 is a compact enclosed limit switch with a roller plunger actuator, rated at 4A/30V DC, carrying IP67 triple-sealed protection and a pre-wired 3-metre VCTF oil-resistant cable. Its SPDT contact configuration — one normally open and one normally closed contact on a common terminal — allows it to serve both

Omron E3JM-DS70M4T Photoelectric Sensor — AC/DC Universal, 700mm Diffuse, Relay Output with Timer Brand: Omron Series: E3JM Part Number: E3JM-DS70M4T (Also referenced as: E3JMDS70M4T / E3JM-DS7OM4T) Type: Built-in Power Supply Photoelectric Switch Sensor In Stock — Fast Shipping Worldwide One Sensor. Any Voltage. Any Job. Most photoelectric sensors ask you to decide upfront: AC or DC? The Omron E3JM-DS70M4T doesn't. With a power supply range spanning 12 to 240V DC and 24 to

Telemecanique XS4P18AB110 Analog Inductive Sensor Overview The XS4P18AB110 is an M18 inductive proximity sensor designed for applications that need analog output rather than a simple switching signal. Its verified product data shows a 0 to 10 V analog output, an 8 mm nominal sensing distance, a non-flush cylindrical M18 design, and a 2 meter cable connection, making it a practical choice for machinery that needs stable metal detection with a usable proportional signal. This

Rechner KAS-80-A12-A-Y5 | Capacitive Proximity Sensor — M12, PNP Antivalent, 6mm, Flush Mount, 10–35V DC, M12 Connector, IP67 Overview The Rechner KAS-80-A12-A-Y5 is a flush-mountable capacitive proximity sensor from Rechner's KAS-80 series, offering 6mm sensing range from an M12 housing with the antivalent PNP output configuration — simultaneously providing both normally open and normally closed switching signals from the same sensor body. The M12 Y5 connector designation

Rechner IAS-10-04-S | Inductive Proximity Switch — PNP, 0.8mm, 10–35V DC, 3-Wire, Reverse Polarity & Short-Circuit Protected, IP67 Overview The Rechner IAS-10-04-S is a PNP 3-wire inductive proximity switch from Rechner's IAS-10 series — the PNP digital output family within Rechner's IAS range. With a 0.8mm nominal sensing distance, it operates at the short end of the inductive sensing spectrum: this is not a sensor for detecting machine guards from 10mm away, but for

Keyence FS-N11N | Digital Fiber Optic Sensor Amplifier — NPN Output, 6 Response Modes, APC, 12–24VDC, Main Unit Overview The Keyence FS-N11N is the NPN output, cable-type main unit in Keyence's FS-N series of digital fiber optic sensor amplifiers. It processes light signals received through a separately mounted fiber optic sensor head, applies the FS-N series' digital signal processing to the received waveform, and outputs a discrete NPN switching signal to the machine

Pepperl+Fuchs RLK39-54-Z/31/40A/116 | Retroreflective Photoelectric Sensor — 7m, Red Light, Polarization Filter, Relay 3A, Timer, Light/Dark On, IP54 Overview The Pepperl+Fuchs RLK39-54-Z/31/40A/116 is a retroreflective photoelectric sensor combining 7-metre detection range, visible red light with polarization filter, relay contact output, built-in timer function, and a terminal compartment connection — all in the robust block-style housing that defines the RLK39 series'

Pepperl+Fuchs NBB5-18GM50-E0 | Inductive Proximity Sensor — M18, 5mm, NPN NO, 5–36VDC, Flush, 1950Hz, 2m Cable, Extended Temperature Overview The Pepperl+Fuchs NBB5-18GM50-E0 is a flush-mount inductive proximity sensor from Pepperl+Fuchs' NBB Basic series, providing 5mm sensing distance from an M18 cylindrical housing with NPN normally open output and an exceptionally wide supply voltage range of 5 to 36V DC. The 1,950Hz switching frequency is its most distinctive specificati

PR18-5DN Autonics Inductive Proximity Switch — M18 NPN NO Sensor (Factory Sealed) The PR18-5DN from Autonics is a cylindrical inductive Proximity Sensor with pigtail cable. PR Series enhance superior noise resistance characteristics with dedicated IC which Autonics self-developed. Also, the series can be widely used in any applications where proximity sensors are required because of diverse range of line-ups in terms of size and sensing distance. DC 3 wire type Integrated

WL12L-2B530 SICK Photoelectric Switch Genuine New Photoelectric Sensor SICK W12L-2 photoelectric sensors are enclosed in a rugged metal housing for demanding applications. Distinguished by the ability to offer reliable detection over long sensing distances. The sensors are compatible for various operations, with the in-built SICK ASIC technology. The W12L-2 photoelectric sensors offer many advantages over conventional optical sensors due to superior OES technology. With a