Servo Motor Driver

FANUC A06B-6132-H003 | Beta i biSV-40 Single-Axis Servo Amplifier — I/O Link Interface / Built-In PSU / 13.6A Why I/O Link Instead of FSSB Most FANUC servo amplifiers — both Alpha and Beta series — communicate with the CNC over FSSB (FANUC Serial Servo Bus). The A06B-6132-H003 is different. It connects to the CNC via the I/O Link interface, routed through the PMM (Power Motion Manager) or a compatible I/O Link master. This distinction matters in practice. FSSB requires high

FANUC A06B-6140-H030 | Alpha i aiPS-30 Power Supply Module — 35 kW / 44 kVA / Regenerative / 200–240V Cabinet Power Foundation — What the aiPS-30 Does The A06B-6140-H030 is the aiPS-30 — the 35 kW Alpha i Power Supply Module in FANUC's A06B-6140 family. In the Alpha i drive architecture, the PSM is the power foundation for the entire drive cabinet: it converts incoming three-phase AC into the regulated DC bus voltage that every connected Alpha i servo amplifier module (αiSVM)

FANUC A06B-6102-H211#H520 | Alpha SPM-11 Spindle Amplifier — 48A / 13.2 kW / 283–325V / Type 1 / CE SPM-11 — Second-Generation Alpha Spindle for Mid-Range Machine Tools The A06B-6102-H211#H520 is the SPM-11 in FANUC's A06B-6102 second-generation alpha spindle family — a 48A, 13.2 kW spindle amplifier matched to the Alpha6, Alpha8, AlphaP8, and AlphaP12 spindle motors. These pairings cover the mid-range of CNC machine tool spindle requirements: small-to-medium machining

FANUC A06B-6096-H201 | Alpha SVM2-12/12 Dual-Axis Servo Module — 3A / 3A / 283–325V / FSSB SVM2-12/12 — Compact Dual Axis at the Low-Current End The A06B-6096-H201 is the SVM2-12/12 — the lowest-current dual-axis module in FANUC's Alpha FSSB SVM family, with 3.0 Arms on both L and M channels. It handles two servo axes from a single module at the small end of the Alpha SVM2 range, making it the correct unit for compact CNC machine configurations where two light-duty axes share

A06B-6096-H101#H Fanuc Servo Amplifier Module A06B6096H101#H A06B-6096-H101#H FANUC A06B-6096-H101#H | Alpha SVM1-12 Single-Axis FSSB Servo Module -- 3.0A / 0.75 kW / 283-325V / α1 / α2 Entry-Level FSSB Module for Light Auxiliary Axes The A06B-6096-H101#H is the SVM1-12 — the smallest-current single-axis module in FANUC's A06B-6096 FSSB alpha servo series. At 3.0A continuous and 0.75 kW, it is not sized for the main cutting axes that carry production loads. Its application is

FANUC A06B-6058-H223 | S Series Dual-Axis AC Servo Amplifier — FANUC 0-B / 0-C / Series 15 Part Number: A06B-6058-H223 Manufacturer: FANUC Corporation (Japan) Product Type: AC Servo Amplifier — Dual Axis Series: S Series Built for the Machines Still Running The A06B-6058-H223 is the dual-axis digital servo amplifier from FANUC's S Series — the drive platform that powered CNC lathes, machining centres, and grinding machines through the late 1980s and into the 1990s. The

Fanuc A06B-6096-H103 | Alpha Servo Amplifier Module — SVM1-40S, Single-Axis, FSSB Fiber Optic, 283–325V / 2.5kW, 9.4A Output Overview The Fanuc A06B-6096-H103 is the SVM1-40S, a single-axis alpha servo amplifier module from Fanuc's A06B-6096 FSSB-interface series. The A06B-6096 family is the FSSB (fiber optic) counterpart to the A06B-6079 PWM series — both series contain the same SVM model designations with identical electrical ratings, differing only in the CNC communication

FANUC A06B-6090-H244 | Alpha C SVUC2-40/40 Dual-Axis Servo Amplifier — 8.7A / 8.7A / 200–230V AC / PWM Type A Symmetric Dual-Axis for Matched Motor Applications The A06B-6090-H244 is the SVUC2-40/40 — both channels at equal current class, equal capability, equal drive output. It was built for machines where two axes run identical motors at matched loads: twin-column machining centres, dual-pallet horizontal mills, synchronized twin-spindle lathes, and similar configurations

FANUC A06B-6093-H102 | Beta SVU-20 Single-Axis Servo Amplifier — Type B PWM / 5.9A / Built-In Power Supply Self-Contained Drive — No PSM Required The clearest architectural distinction between the Beta SVU and the Alpha SVM series is the built-in power supply. Alpha SVM modules require a dedicated PSM (Power Supply Module) that converts AC mains to a shared DC bus for multiple amplifier modules. The Beta SVU-20 incorporates its own AC-to-DC conversion internally — it connects

FANUC A06B-6110-H015 | Alpha i PSM-15i Power Supply Module — 17.5 kW / 200–240V AC / 283–325V DC / 3-Phase DC Bus Foundation for Medium-Scale Alpha i Drive Cabinets The A06B-6110-H015 is the PSM-15i — the 17.5 kW power supply module from FANUC's A06B-6110 Alpha i series. It accepts 200–230/240V AC three-phase input at 63A and produces the regulated 283–325V DC bus that all connected Alpha i servo amplifier modules (αiSVM) and spindle amplifier modules (αiSPM) draw from. This

FANUC A06B-6120-H011 | Alpha i PSM-11HVi Power Supply Module — 11 kW / 400V AC / 90mm / External Heatsink HV — What Distinguishes This Module The A06B-6120-H011 is the PSM-11HVi — the 11 kW power supply module from FANUC's Alpha i HV (High Voltage) series. The HV designation identifies the machine's supply voltage class: this module accepts 400V AC three-phase input and produces the regulated DC bus that feeds the HV-rated servo and spindle amplifier modules in the same

FANUC A06B-6164-H333 | βiSVSP 40/40/40-15 Combined Servo and Spindle Amplifier — 3-Axis / 15kW Spindle / FSSB / 200V One Module for Four Drive Channels The A06B-6164-H333 is a βiSVSP — FANUC's combined Beta i Servo and Spindle unit. Three independent servo motor channels and a full 15 kW spindle amplifier share one module. In a standard machine cabinet, this replaces what would otherwise require a separate spindle amplifier plus a multi-axis servo unit, reducing cabinet depth

MR-J4-70B | MELSERVO-J4 Servo Amplifier — 0.75kW / SSCNET III/H / 5.8A / AC200V / STO SIL3 PL e / 8ms / IP20 SSCNET III/H — Optical Motion Network at 0.222ms Cycle The MR-J4-70B uses SSCNET III/H (Servo System Controller NETwork III/High-speed) as its command interface. SSCNET III/H transmits servo commands over optical fibre — no electrical noise coupling between the motion controller and the drive, and no signal degradation across long cable runs. The communication cycle is

Contact:Ms AmySKYPE:sandesales01EMAIL:sales01@sande-elec.com Tested FANUC A06B-6140-H055Fanuc Power Supply Driver****Please firstly Contact us for its Availability, due to goods Vary. Thanks much! WE ALSO CAN SUPPLY : A06B-6121-H075 SERVO AMPLIFIER SPINDLEA06B-6124-H102 SERVO AMPLIFIER MODULEA06B-6124-H103 SERVO AMPLIFIER MODULEA06B-6124-H104 SERVO AMPLIFIER MODULEA06B-6124-H105 SERVO DRIVE AMPLIFIER MODULE SVM1-80HVIA06B-6124-H106 SERVO DRIVE AMPILFIER MODULE SVM1-180HVIA06B

FANUC A02B-0301-B801 | Series 0i Mate-TB CNC Control System Unit — FSSB Servo Interface, A16B-3200-0495 CPU Card, PMC, Optional Graphics/RAM/ROM Cards, Lathe Platform Part Number: A02B-0301-B801 Manufacturer: FANUC Corporation (Japan) Product Line: FANUC Series 0i — 0i-B Generation Variant: 0i Mate-TB (lathe/turning platform) Function: Complete CNC system control unit — the central hardware assembly containing the main CPU board, FSSB servo interface, PMC (Programmable

FANUC SERVO AMPLIFIER Module A06B-6111-H006#H550 / With 1 year warranty Large Fanuc Stock, Best price Model: A06B-6111-H006#H550 Description: ALPHA i Spindle Module MDL SPM-5.5i Product Series: A06B-6111 Availability: In stock, please call to inquire about delivery time. Warranty: One year Condition: Brand new The A06B-6111-H006#H550 Alpha i Spindle Module MDL SPM-5.5 ensures your automated production line operates at maximum capacity. Our equipment improves production line

New Fanuc Servo Drive Module A06B-6078-H211#H500 A06B6078H211H500 Product Series: A06B-6078 Stock Status: In Stock Warranty: One Year The FANUC A06B-6078-H211#H500 Alpha spindle amplifier module SPM-11 is suitable for Alpha6, Alpha8, AlphaP8, and AlphaP12 spindle motors. As part of the A06B-6078-H211 product series, the A06B-6078-H211#H500 has a rated input power of 13.2kW, a maximum output voltage of 230V, and a rated output current of 48A. Our online store sells a variety

Contact:Ms Amy SKYPE:sandesales01 EMAIL:sales01@sande-elec.com Fanuc Spindle Amplifier Module A06B-6102-H202#H520 New AO6B-61O2-H2O2#H52O Large Fanuc Stock, Best price! A06B-0238-B000 A06B-0238-B000#0100 A06B-0238-B001 A06B-0238-B001#0100 A06B-0238-B002 A06B-0238-B002#0100 A06B-0238-B100 A06B-0238-B100#0100 A06B-0238-B101 A06B-0238-B101#0100 A06B-0238-B102 A06B-0238-B102#0100 A06B-0238-B200 A06B-0238-B200#0100 A06B-0238-B201 A06B-0238-B201#0100 A06B-0238-B202 A06B-0238-B202

Fanuc A06B-6100-H003 Servo Amplifier New servo motor driver​ Part Number: A06B-6100-H003 Description: 6 AXIS SER­VO DRI­VE Product Series: A06B-6100 The A06B-6100-H003 6 AXIS SERVO DRIVE is an essential component for precision movements in a wide range of industrial applications. Designed to deliver efficient and reliable performance, this servo drive is part of the A06B-6100 product series, renowned for its exceptional quality and functionality. With its advanced technology