gate valve

816-F (DIN) Ductile iron resilient seat NRS gate valve1. Conforms to DIN33522. Flanges dimensions conform to DIN2532/2533 ＆EN10923. Face to face dimensions conform to DIN3202 f4/f54. Nominal pressure: 1.6mpa5. Shell test pressure: 2.4mpa6. Sealing test pressure: 1.76mpa7. Suitable medium: water

815-F (DIN) Ductile iron resilient seat RS gate valve1. Conforms to DIN33522. Flanges dimensions conform to DIN2532/2533 ＆EN10923. Face to face dimensions conform to DIN3202 f4/f54. Nominal pressure:1.6mpa5. Shell test pressure: 2.4mpa6. Sealing test pressure: 1.76mpa7. Suitable medium: water

616-F (BS) Cast Iron Gate Valve (NRS)1. Design and Manufacture Conform to BS51632. Flange dimensions Conform to BS4504 PN16＆EN10923. Face to Face dimensions Conform to BS5163 PN164. Testing Conform to BS67555. Rubber material may be also CR、EPDM etc.6. All valve surfaces shall be painted with Epoxy resin paint.7. It can be operated with wrench head according to customer’s requirement.

616-F (BS) Cast Iron Gate Valve (NRS)1. Design and Manufacture Conform to BS51632. Flange dimensions Conform to BS4504 PN16＆EN10923. Face to Face dimensions Conform to BS5163 PN164. Testing Conform to BS67555. Rubber material may be also CR、EPDM etc.6. All valve surfaces shall be painted with Epoxy resin paint.7. It can be operated with wrench head according to customer’s requirement.

616-F (BS) Cast Iron Gate Valve (NRS)1. Design and Manufacture Conform to BS51632. Flange dimensions Conform to BS4504 PN16＆EN10923. Face to Face dimensions Conform to BS5163 PN164. Testing Conform to BS67555. Rubber material may be also CR、EPDM etc.6. All valve surfaces shall be painted with Epoxy resin paint.7. It can be operated with wrench head according to customer’s requirement.

615-F (BS) Cast Iron Gate Valve (RS)1. Design and Manufacture Conform to BS51632. Flange dimensions Conform to BS4504 PN16＆EN10923. Face to Face dimensions Conform to BS5163 PN164. Testing Conform to BS67555. Rubber material may be also CR、EPDM etc.6. All valve surfaces shall be painted with Epoxy resin paint.7. It can be operated with wrench head according to customer’s requirement.

516-F (ANSI) Cast Iron Gate Valve（NRS）1. Design and Manufacture Conform to AWWA C5092. Flange dimensions Conform to ANSI B16.1 (1251b)3. Face to Face dimensions Conform to ANSI B16.10 (1251b)4. Rubber material may be also CR EPDM etc.5. All valve surfaces shall be painted with Epoxy resin paint.6. It can be operated with wrench head according to customer’s requirement.

516-F (ANSI) Cast Iron Gate Valve（NRS）1. Design and Manufacture Conform to AWWA C5092. Flange dimensions Conform to ANSI B16.1 (1251b)3. Face to Face dimensions Conform to ANSI B16.10 (1251b)4. Rubber material may be also CR EPDM etc.5. All valve surfaces shall be painted with Epoxy resin paint.6. It can be operated with wrench head according to customer’s requirement.

515-F (ANSI) Cast Iron Gate Valve（RS）1. Design and Manufacture Conform to AWWA C5092. Flange dimensions Conform to ANSI B16.1 (1251b)3. Face to Face dimensions Conform to ANSI B16.10 (1251b)4. Rubber material may be also CR EPDM etc.5. All valve surfaces shall be painted with Epoxy resin paint.6. It can be operated with wrench head according to customer’s requirement.

518-F (ANSI)Clip Gate Valve OS﹠Y Solid Wedged Inside Screw1. Threaded Ends to B2.12. QT-A Bronze Trim3. QT-B All Iron

802-F (DIN) Cast Iron Gate Valve (NRS)DIN3352 PN161. Design and Manufacture Conform to DIN 33522. Flange dimensions Conform to DIN 25333. Face to Face dimensions Conform to DIN 3202 F4，F5.4. Testing Conform to DIN 32305. It can be operated with bevel gear according to customer’s requirement.6. It can be equipped with open and close position indicator.

602-F (BS) Cast Iron Gate Valve (NRS)1. Design and Manufacture Conform to BS5150﹠BS51632. Flange dimensions Conform to BS4504 PN163. Face to Face dimensions Conform to BS5150 PN164. Testing Conform to BS67555. It can be operated with bevel gear according to customer’s requirement.6. It can be equipped with open and close position indicator

601-F (BS) Cast Iron Gate Valve (RS)1. Design and Manufacture Conform to BS5150﹠BS51632. Flange dimensions Conform to BS4504 PN163. Face to Face dimensions Conform to BS5150 PN164. Testing Conform to BS67555. It can be operated with bevel gear according to customer’s requirement.

501-F (ANSI) Cast Iron OS&Y Gate Valve 1. Design and Manufacture Conform to MSS SP-70 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Testing Conform to MSS SP-70 5. It can be operated with bevel gear according to customer’s requirement. 6. Suitable media: water, oil, gas

1. Design and Manufacture Conform to MSS SP-702. Flange dimensions Conform to ANSI B16.1 (1251b)3. Face to Face dimensions Conform to ANSI B16.10 (1251b)4. Testing Conform to MSS SP-705. It can be operated with bevel gear according to customer’s requirement.6. It can be operated with wrench head according to customer’s requirement.7. Suitable media: water, oil, gas

502-F (ANSI) Cast Iron NRS Gate Valve1. Design and Manufacture Conform to MSS SP-702. Flange dimensions Conform to ANSI B16.1 (1251b)3. Face to Face dimensions Conform to ANSI B16.10 (1251b)4. Testing Conform to MSS SP-705. It can be equipped with open and close position indicator.6. It can be operated with bevel gear according to customer’s requirement.7. It can be operated with wrench head according to customer’s requirement.8. Suitable media: water, oil, gas

501-F (ANSI) Cast Iron OS&Y Gate Valve1. Design and Manufacture Conform to MSS SP-702. Flange dimensions Conform to ANSI B16.1 (1251b)3. Face to Face dimensions Conform to ANSI B16.10 (1251b)4. Testing Conform to MSS SP-705. It can be operated with bevel gear according to customer’s requirement.6. Suitable media: water, oil, gas