Automation DCS

EPRO PR6424/006-010 PR6424/006 010 PR6424/006010 Product Description: Advanced multi-processor design for leading-edge velocity loop bandwidth, fully digital current, velocity, and position loopsLarge-scale integration with custom ASICs and IPMs for performance and reliabilityA 16-bit A/D convertor for precise velocity command input Flash memory for simple field upgrades A personality module to store setup parameters and simplify drive replacement Reduced component count for

EPRO PR6424/000-040 CON21 PR6424/000 040 CON21 Product Description: ULTRA 100 and 200 drives are feature-rich, high-performance drives that offer the flexibility to handle a wide range of applications. You can set up the ULTRA 100/200 drives as indexing drives, velocity servo drives, stepper drives, or master encoder followers. With the DeviceNet option, you can remotely commission and reprogram ULTRA 100 drives. In addition, you can use the ULTRA 100/200 drives host command

EPRO PR6424/000-030 CON021 PR6424/000030 CON021 Product Description: Bulletin 1305 drive parameter data can be programmed and displayed using PLC’s, SLC’s or other logic controllers using an optional Bulletin 1203 Communication Module. The amount of information that can be transferred between the drive and controller is determined by the DIP switch settings on theCommunication Module. Table B.1 illustrates the dip switch settings for Bulletin 1203-GD1 (Remote I/O) communicati

EPRO PR6424/000-030 PR6424/000 030 Product Description: All drives come equipped with a fault LED. When the fault LED is illuminated it is an indication a fault condition exists. Refer to page 2-3 for the location of the fault LED. Once the fault is properly cleared the LED will return to an off state. Diagnostics As can be seen in Figure 2.3, there are two indicators provided to display the drive’s status condition. The DC Bus Charge Indicator is a neon bulb that will be

Automation DCS BERGER LAHR RDIO 8/24-0.5 RDIO82405 STEPPER DRIVE Excellent Working Condition Product Description: mode Axis operating mode: point-to-point mode = 0 Position following mode via encoder connection (electronic gear) =1 Position following mode via variable = 2 Positioning in vel Set speed (default setting with parameter) point-to-point mode acc Maximum acceleration (default setting with parameter) move(f) Positioning to relative target position (f = with wait

Automation DCS BERGER LAHR RDC2 RDC-2 REMOTE ANNUNCIATOR For new products Product Description: Loading or reading operand into the CR ldn Loading or reading the negated operand into the CR st Storing the CR content stn Storing the CR content Setting and resetting r Setting output or flag to 0 s Setting output or flag to 1 Timer stimer Loading and activating timer (availabe in the PLC prog. only) Logical operations and AND operation of the CR with operand andn AND operation of

Automation DCS BERGER LAHR WD5-008.051-00 STEPPER DRIVE Super quality products Product Description: Specifies the limit switch to be approached in a reference movement using the commands "ref" and "reff" 0 = Negative limit switch 1 = Positive limit switch 2 = CCW reference switch (as seen from front towards motor shaft) 3 = CW limit switch (as seen from front towards motor shaft) Clearing speed limit switch 1 - 10000 Hz (200) Series 300 Speed when moving out of limit switch

Automation DCS BERGER LAHR WDP3-318 WDP3-318.0801 STEPPER DRIVE New foreign imports Product Description: For Series 300 controllers: Press key 41 on-side until "01" is displayed on the controller (Stop status); then press and hold both keys 41 and 42 on + side until "Ed" is displayed. For WDP3-014/WDP3-018 controllers: Press - key until "01" is displayed on the controller (Stop status); then press and hold both keys + and ↵ until "Ed" is displayed. "E

3 Lbs Automation DCS WOODWARD 5417-028 High Output Dual Power Amplifier WOODWARD Parts 5417-028 High-output dual power amplifier superior quality product Product Description: This document and its contents are the proprietary and confidential property of Woodhead Industries Inc. and/or its related companies and may not be used or disclosed to others without the express prior written consent of Woodhead Industries Inc. and/or its related companies. SST is a trademark of

WOODHEAD SST-PB3-VME-1 applies to the SST-PB3-VME-1 interface cards effective service Product Description: The following special terms are used throughout this guide: Card the SST-PB3-VME-1 or SST-PB3-VME-2 network interface card Channel a Profibus network interface on the card Firmware Module the embedded software module that gets loaded to the card’s memory and runs on the card. This is the operating system of the card, enabling it to respond to commands from the host and

WOODHEAD SST-DN3-PCU-1-E applies to the SST-DN3-PCU-1 interface cards NEW in sealed box Product Description: This document and its contents are the proprietary and confidential property of Woodhead Industries Inc. and/or its related companies and may not be used or disclosed to others without the express prior written consent of Woodhead Industries Inc. and/or its related companies. SST is a trademark of Woodhead Industries Inc. All other trademarks belong to their respective

WOODHEAD SST-DN3-PCU-2-E Hardware SST-DN3-PCU-2-E interface cards new version Product Description: SST is a trademark of Woodhead Software & Electronics. All other trade names are trademarks or registered trademarks of their respective companies. At Woodhead, we strive to ensure accuracy in our documentation. However, due to rapidly evolving products, software or hardware changes occasionally may not be reflected in our documents. If you notice any inaccuracies. Related

WOODHEAD SST-DN3-PCI-2 applies to SST-DN3-PCU-2 interface cards Free shipping Product Description: This document and its contents are the proprietary and confidential property of Woodhead Industries Inc. and/or its subsidiaries and may not be used or disclosed to others without the express prior written consent of Woodhead Industries Inc. and/or its subsidiaries. SST is a trademark of Woodhead Software & Electronics. All other trade names are trademarks or registered

WOODHEAD PCU1000 PCU1000 user manual FACTORY SEALED Product Description: The Process Control Unit PCU1000 complements the red-y smart device series. It enables users to control and visualize mass flow meters and controllers in situations where control via a PC or PLC is neither desired nor available. This manual will familiarize you with the installation and operation of the PCU1000. Read the manual carefully before commissioning the device. Please contact your distribution

Automation DCS PR6424/000-040 CON21 Dual Channel Shaft Vibration Monitor New 2016 Sealed Product Description: Surface contact sensor designed for critical turbomachinery applications such as steam, gas and hydro turbines, compressors, pumps and fans to measure radial and axial shaft dynamic displacement, position and eccentricity. The PR9350 is designed to work under tough environmental conditions. Dynamic Performance Range Sensiti Related Product Recommendation: YK540A

Automation DCS PR96424/010-000 CON011 Inductive Sensor DHL FREE Product Description: Surface contact sensor designed for critical turbomachinery applications such as steam, gas and hydro turbines, compressors, pumps and fans to measure radial and axial shaft dynamic displacement, position and eccentricity. The PR9350 is designed to work under tough environmental conditions. Dynamic Performance Range Sensiti Related Product Recommendation: YK540A HW9381641-A 11211-1000K

Automation DCS PR9350/02 Inductive Sensor Excellent Working Condition Product Description: Surface contact sensor designed for critical turbomachinery applications such as steam, gas and hydro turbines, compressors, pumps and fans to measure radial and axial shaft dynamic displacement, position and eccentricity. The PR9350 is designed to work under tough environmental conditions. Related Product Recommendation: 110M-PS AW-PH405E 11211-1000K RF-5301PC R2600 369-HI-0-0-0-0

Automation DCS PR9268/301-000 Machinery HealthTM Sensor For new products Product Description: The high output level and the low impedance of the measuring coil effect a high interference immunity. Subsequent measuring amplifiers of the MMS 3000 and A 6000 machine monitoring systems can process the vibration signal without the need of additional intermediate amplifiers Related Product Recommendation: 110M-PS AW-PH405E 11211-1000K RF-5301PC R2600 369-HI-0-0-0-0 83751B SE2TV 369

Automation DCS PR9268/201-000 Machinery HealthTM Sensor Super quality products Product Description: The sensors are dynamic sensors with the measuring coil as part of the seismic element, moving in the field of the permanent magnet. Damping of the measuring elements is realized by damping cylinders resp. by external wiring and set to a value of approx. 0.6, resulting in a very linear characteristic over the entire frequency range Related Product Recommendation: 110M-PS AW

Automation DCS PR9268/200-000 Machinery HealthTM Sensor New spot folding Product Description: The robust construction and the splash-proof housing permits the sensors to be mounted even in hostile environments. Application areas of the sensors are all kind of turbo machinery, fans, compressors, gear boxes, pumps, coal mills and other machines. The high output level and the low impedance of the measuring coil effect a high interference immunity. Subsequent measuring amplifiers