Nickel Alloy Steel Flange

UNS Number N06601 Other common names: Alloy 601 Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200° F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling. This nickel alloy has good high temperature strength, and

Hastelloy C – 4 UNS Trademark W.Nr N06455 HastelloyC4 2.4610 Hastelloy C-4 Chemical compostion: Alloy % Ni Cr Mo Fe C Mn Si Co S P Ti C-4 Min. bal 14 14 Max. 18 18 3.0 0.015 1.0 0.08 2.0 0.03 0.04 0.70 Hastelloy C-4 Physical properties: Density 8.9 g/cm3 Melting point 1325-1370 ℃ Hastelloy C-4 Alloy minimum mechanical properties in the room temperature: Status Tensile strength Rm N/mm2 Yield strength RP0.2 N/mm2 Elongation A5 % Solution treatment 650 280 40 Hastelloy C-4

ASTM B 409, B 408, B 407, B 564 UNS Number N08810/N08811 Other common names: Alloy 800, Alloy 800H/HT Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Incoloy 800 was the first of these alloys

Incoloy 901 UNS Trademark N09901　 Incoloy 901 Incoloy 901 Chemical composition: Alloy % Ni Cu Al Fe Ti Co Mn S C Si P Cr Mo B Incoloy 901 Min. 40.0 Balance 2.35 11.0 5.0 0.01 Max. 45.0 0.50 0.35 3.10 1.0 1.0 0.03 0.10 0.60 0.03 14.0 7.0 0.02 Incoloy 901 Physical properties: Density 8.14 g/cm3 Melting point 1280-1345℃ Incoloy 901 minimum mechanical properties in the room temperature: Status Tensile strength Rm N/mm2 Yield strength RP0.2 N/mm2 Elongation A5 % Incoloy 901 1034

Hastelloy B UNS Trademark N10001 HastelloyB Hastelloy B Chemical compostion: Alloy % Ni Mo Fe Cr Co C Mn V Si P S Hastelloy B Min. Balance 26 4.0 0.2 Max. 30 6.0 1.0 2.5 0.05 1.0 0.4 1.0 0.04 0.03 Hastelloy B Physical properties: Density 9.24g/cm3 Melting point 1330-1380℃ Hastelloy B Alloy minimum mechanical properties in the room temperature: Alloy status Tensile strength Rm N/mm2 Yield strength RP0.2 N/mm2 Elongation A5 % Solution treatment 690 310 40 Hastelloy B Characteri

Inconel 718 UNS Trademark W.Nr N07718 Inconel718 2.4668 Inconel 718 Chemical composition Alloy % Ni Cr Fe Mo Nb Al C Mn Si S Cu Al Ti B Inconel 718 Min. 50 17 balance 2.8 4.75 0.2 0.2 0.65 Max. 55 21 3.3 5.5 0.6 0.08 0.35 0.35 0.015 0.30 0.8 1.15 0.006 Inconel 718 Physical properties Density 8.24 g/cm³ Melting point 1260-1320 ℃ Inconel 718 Alloy minimum mechanical properties in the roomtemperature Status Tensile strength Rm N/mm² Yield strength Rp 0. 2N/mm² Elongation As %

ASTM B 409, B 408, B 407, B 564 UNS Number N08810/N08811 Other common names: Alloy 800, Alloy 800H/HT Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Incoloy 800 was the first of these alloys

The newest of the high-performance superalloys invented by Special Metals Corporation, INCONEL® alloy 783 (UNS R30783/U.S. Patent 5,478,417), is an oxidation-resistant, low expansion, nickel-cobalt-iron alloy with aluminum, chromium, and niobium additions.The new alloy is of considerable interest to aircraft gas turbine engine designers and materials engineers for containment and clearance control components such as rings, casings, shrouds and seals for compressors, turbines

Hastelloy C Hastelloy C Chemical composition Alloy % Ni Cr Mo Fe W Co C Mn Si V P S Hastelloy C Min. bal 14.5 15 4 3 Max. 16.5 17 7 4.5 2.5 0.08 1 1 0.35 0.04 0.03 Hastelloy C Physical properties: Density 8.94 g/cm3 Melting point 1350 ℃ specific heat capacity 0.385 103J/kg•K coefficient of thermal conductivity 29.3 W(m•K) elastic modulus 210 103MPa Hastelloy C alloy mechanical properties in the room temperature Alloy Status Tensile strength Rm N/mm² Yield strength RP0.2 N/mm²

Alloy C-2000 Alloy C-2000 (UNS N06200) along with the other C-type alloys (UNS N10276) is a quite versatile Ni-Cr-Mo alloy with excellent resistance to pitting, stress-corrosion cracking, and crevice corrosion. The technical objective of the design of Hastelloy C-2000 was even greater versatility, as compared with the traditional Ni-Cr-Mo alloys. This was accomplished by use of a high chromium content (23%), a high molybdenum content (16%), and a small but effective addition

UNS Number N02200/N02201Nickel 200 and Nickel 201 are solid solution strengthened, commercially pure wrought materials with good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. Nickel 201 was a modification of 200 to control carbon (.02 max) which keeps it from being embrittled by intergranular precipitates at temperatures of 600째 F to 1400째 F in many processes. Typically, the elemental restriction

UNS Number N02200/N02201Nickel 200 and Nickel 201 are solid solution strengthened, commercially pure wrought materials with good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. Nickel 201 was a modification of 200 to control carbon (.02 max) which keeps it from being embrittled by intergranular precipitates at temperatures of 600째 F to 1400째 F in many processes. Typically, the elemental restriction

1.Alloy form:bar, sheet, plate, tube, pipe, wire, cake, ring,flange 2.Provide free inspection and certificate 3.MOQ: 100kg Nimonic 80A (UNS N07080) UNS Trademark W.Nr N07080 Nimonic80A 2.4952 Nimonic 80A Chemaical composition: Alloy % Ni Cr Fe Mn Si P S Al Ti C Co B Cu 625 Min. Bal 18 1.0 1.8 Max. 21 3.0 1.0 1.0 0.02 0.015 1.8 2.7 0.1 2.0 0.008 0.2 Nimonic 80A Physical properties: Density 8.19 g/cm3 Melting point 1320-1365°C Nimonic 80A minimum mechanical properties in the

The high nickel(24%) and molybdenum(6.3%) contents of the AL-6XN alloy give it good resistance to chloride stress-corrosion cracking. The molybdenum confers resistance to chloride pitting. The nitrogen contact of AL-6XN alloy serves to further increase pitting resistance and also gives it higher strength than typical 300 series austenitic stainless steels, and thereby often allows it to be used in thinner sections. The high levels of chromium, molybdenum and nitrogen in AL

AISI 310MoLN (1.4466, S31050) Stainless Steel AISI 310MoLN stainless steel is an alloy of iron, further classified as an austenitic stainless steel. It is typically furnished in the solution annealed (AT) condition. 310MoLN is the AISI designation for this material. 1.4466 is the EN numeric designation. S31050 is the UNS number. Additionally, the EN chemical designation is X1CrNiMoN25-22-2. Material Properties Base Metal Price46 % rel Density7.9 g/cm3 (490 lb/ft3) Elastic

Alloy 925 Incoloy 925 N09925 WN SO Blind flange forging disc ring Flange Type: WN/welding neck flange;SO/slip on flange; PL /Plate flange;BL/Blind flange; Th/Threaded flange;SW/socket welding flange; LF/SE(lapped flange/stub end);LWN/long welding neck flange; Orifice flange;Reducing flange;API flange; Integral/Compact flange;Spectacle blind, Line spade and spacer,Paddle blind,Paddle spacer; Orifice plate;Pipe plate,Bleed ring;Plate flange Standard: ANSI B16.5,ANSI B16.47,ANSI

UNS Number N06625 Other common names: Alloy 625 Inconel 625 is a corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance. Its outstanding strength and toughness is due to the addition of niobium which acts with the molybdenum to stiffen the alloy’s matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability and

We can provide Alloy 926 material in the form of flange, fittings, pipes, fasteners.

Hastelloy C22, also known as alloy C22, is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungsten content give good resistance to reducing media. This nickel steel alloy also has excellent resistance to oxidizing aqueous media including wet chlorine and mixtures containing nitric

UNS Number N08825 Other common names: Alloy 825 Incoloy 825 is a nickel-iron-chromium alloy with additions of molybdenum and copper. This nickel steel alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such as pitting and