Mask Test Machine

Mask Particle filtration efficiency tester(PFE) Application: The FPE Tester is used to test the particle filtration efficiency of daily protective respirator and medical respirator, and determine the blocking performance of ordinary fabric and medical protective respirator for constant flow of air. It is applicable to medical equipment testing center, safety protection testing center, labor protection testing center, drug testing center, disease prevention and control center,

Full Face Respirator Airtightness Tester MODEL:SM 4311C Full Face Respirator Airtightness Tester is an instrument for the full face respirator air tightness test of the respirator. Put the mask on the matching test head mold, seal the inhalation valve and wet the exhalation valve. Pneumatic vacuum pump, make the pressure in the mask reach a certain negative pressure value, stop pumping, start timing, observes and records the pressure change value of the mask within 60s.

Respirator Exhalation Valve Airtightness Tester MODEL: SM 4311AB Respirator Exhalation Valve Airtightness Tester is used to test the airtightness of the exhalation vale of the respirators. The exhalation valve is sealed on the exhalation valve test fixture in an airtight way, and the vacuum pump is used to pump air to make the exhalation valve bear a certain pressure and detect the leakage flow of the exhalation valve. SM4311AB tester can meet the requirement of GB 2626 and

Respirator Eyepiece Strength Tester MODEL: SM 3230 Respirator Eyepiece Strength Tester is used to test the damage degree of the respirator eyepiece when the steel ball falling freely to it under certain height conditions. Correctly wear the tested sample on the test head mold, place and fix the head mold with the lens upward, make the steel ball drop freely from 1.3m height to the center of the lens, and record whether there is fracture. SM 3230 tester is composed of machine

Face Masks and Respirators Flammability Tester MODEL: SM 2187 Face Masks and Respirators Flammability tester is a test equipment for the flame resistance of masks and respirators. Install the tested sample on the metal head mold, light the burner, adjust the flame height, make the flame height at the top of the burner reach 40 ± 4mm, and make the flame temperature at 20 ± 5mm from the top of the burner reach 800 ± 5 ℃. Start the motion control device of the metal head mold,

Particle (PSL) Filtration Efficiency Tester SM4315C Particle Filtration Efficiency Tester is used to test the filtration level of aerosol particles by respirator filter element under certain environmental conditions. The aerosol particles (PSL-Polystyrene Latex) with a certain concentration and particle size distribution are generated by the aerosol generator, and pass through the tested sample at the specified air flow rate. The concentration of the particles before and

Multi-Channel Particle Filtration Efficiency Tester MODEL: SM4315B Multi-Channel Particle Filtration Efficiency Tester is used to test the filtration level of aerosol particles by respirator filter element under certain environmental conditions. The aerosol particles (Oil) with a certain concentration and particle size distribution are generated by the aerosol generator, and pass through the tested sample at the specified air flow rate. The concentration of the particles

20KN Servo Control Universal Test Machine SM-UTM-8000E The SM-UTM-8000E series are middle-range tensile test machine for measuring strength in tension, compression, bend, flexure, tear, peel, shear and adhesion testing, etc; to test rubber, plastics, footware, leather, wire and many other materials. The whole SM-UTM-8000 series are equipped with desktop computer and software program which provide intelligent operation and sophiscticated analysis. There are a variety of grips,