Furniture Testing Equipment

Professional Furniture Testing Machine Chair Armrest Testing Equipment BIFMA 5.1 Application Chair Armrest Testing Machine is used to evaluate the pull-resistance ability of the armrest at parallel direction, to determine its fatigue life under parallel strength. Fix the caster, set the time, and pulling strength and time for automatically reposition. Technical parameter a.base size -1.5m(W)×2m(L)×2m(H) b.Vertical post- Quantity:2 units Height:1.5m c.Cross bar-Quantity:1 unit

BIFMA 5.1 Furniture Testing Equipment Chair Seat Impact Testing Machine Application This test applies to all types of chairs. Purpose of Test: To evaluate the ability of a chair to withstand heavy impact forces on the seat. This tester is designed for dynamic and cyclic durability seat test. Seat Impact Testing Machine use aluminum frame,elegant appearance. The tester is suitable used for impact testing of all kinds furniture,such as home furniture,hotel furniture,restaurant

BIFMA Furniture Testing Equipment Office Chair Seat Stability Tester Application This machine is suitable to test the seats (such as chairs, office chairs) forward stability. The purpose of these tests is to evaluate the front and rear stability of chairs. Principle Put the test-piece on the test table, blocked the front leg, apply specified force with forward 20N applied at seat loading point, check the article tends to oventurn forward or not to determine the test-piece

BIFMA X5.1 Furniture Testing Equipment Medium Density Fiberboard Rear Stability Disk Surface layer was made medium density fiberboard Middle layer, sandwich construction. Weight: 10 kg ± 0.05 kg Dimension:350mm(dia.)×48mm(T) Thickness 48mm The surface friction of he disk (disk to disk):sliding force shall be 31±9N Testing Standards ANSI/BIFMA X5.1-2011 12.3 Rear Stability EN 1022:2005 4.4 Loading discs EN 1022:2005 7.3 Tilting chairs Application Seating with tilting backrest

Desk Integrate Testing Machine Purpose Adjustable desk strength, containing Center load, load and stability testing Instruction This machine is three-in-one integrated testing machines, strength of adjustable desk, contains a center load, load and tester Specification Tong heads Center next to the loading point-end load-side load stability test Test block size 300-300mm 200-200mm 200-200mm 100-100mm Load 200kgs 75kgs 45kgs 45kgs Test Time 24 hours 30 minutes 5 seconds,3min

Caster of Chair Durability Testing Machine Purpose For the assessment of office chair in the rotation ability for load conditions Instruction The machine used in the crust has a rotation of the Office Chair, used to assess the situation that Office Chair in the load under rotation, seat surface of office chair place weight-bearing, powered by a pneumatic cylinder, Office chairs for travel to action, to assess the wear life of casters, tour. rate and frequency can be set, test

Chair Swivel Testing Machine Application This test applies to all types of chairs with a swivel seat. Purpose of Test: This machine is designed to evaluate the ability of a chair to withstand stresses and wear caused by repeated swiveling. Specifications According to test Standard: BIFMA X5.1-2002, Test No. 9 1. Applicability: This test applies to all types of chairs with a swivel seat. Purpose of Test: this machine is designed to evaluate the ability of a chair to withstand

Formaldehyde Tester Product information Formaldehyde Tester I Application Formaldehyde mattress mattress tester is mainly applied to formaldehyde, VOC emission test Main parameter Studio dimensions: length × width × height = 1.0 × 1.0 × 0.3 (m) (referring to the internal space dimensions). Four corners, each with a box intake, a one-way air intake device, pore diameter D = 4mm. Pump flow range: 0.1 ~ 5L/min. Timing function: switch time, sniffing identified remind timing,

Chair-Back-Durability-Test Application This test shall be performed on Type I Tilting chairs with backrests greater than 200 mm in height. It is used for static load and durability tests of various office chairs, high chairs, children's dining chairs, etc., to simulate the user's condition, and to perform cushions and backrests (simultaneous and/or separate) for all kinds of chairs. Static load test and dynamic endurance test to judge the fatigue stress and bearing capacity

Automatical Paperboard Burst Strength Testing Equipment Product information Automatical Paperboard Burst Strength Tester is a kind of international Mullen equipment, and is widely used on packing material, such as all kinds of paperboards and single layer & multi-layer corrugated boards, as well as silk, cotton and other non-paper materials. Standards: JIS-L1004,L1018,L1031,K6328,P8131,P8112 and ASTM-D2210,TAPPI T403,ISO2759-2001,GB/T1539 Technical Parameters Display LCD View

Chair Pull Back Impact Testing Machine Purpose To check if each part is the same, loose and weld color fastness Instruction; Fixed Chair casters, the back of Chair to a certain strength, speed, direction, trips and backs a set amount of repeated actions, and then the review of each part are the same, loose and weld color fastness Specification Load 0~200kg adjustable Route 0~300mm adjustable Test speed 10~30 times(can be set) Test times 0~999999 times(can be set) Controller

EN 1335-3 Office Chair Testing Machine For Chair Armrest Pull Resistance Ability Use Chair Armrest Testing Machine is used to evaluate the pull-resistance ability of the armrest at parallel direction, to determine its fatigue life under parallel strength. Fix the caster, set the time, and pulling strength and time for automatically reposition. Specifications​ Armrest Height 650-780mm or specified Timer LCD 0.01sec-99.9sec, 1sec-99 minute 99 second Machine Size 1200*500*1000mm

BIFMA 5.1 Furniture Testing Equipment Automatic Chair Base Compression Testing Machine Product information The test shall be performed on all pedestal bases. The purpose of this test is to evaluate the ability of a pedestal base to withstand excessive vertical forces. The machine used for the vertical pressure testing, destructive testing and fatigue testing use of the office chair Ipomoea base(Star Base) repeated pressure loading in setting force test cycle, as the fatigue

BIFMA 5.1 Furniture Testing Equipment Air Cylinder Controlled Backrest Durability Testing Machine This machine is to evaluate the ability of the chairs to withstand fatigue stresses and wear caused by rearward force on the backrest of the chair. Specifications Backrest Height 500-1200mm Test speed 16 and 20 times/min or specified Loaded weight 100lb or 225 lb Counter LCD, 0-999,999 Air pressure force 0-150lb Machine size 136*66*140cm Force stroke 0-18 inch Weight 549kg Force

Furniture Physical Testing Equipment , Backrest Durability Testing Machine Use This machine is to evaluate the ability of the chairs to withstand fatigue stresses and wear caused by rearward force on the backrest of the chair. Specifications Backrest Height 500-1200mm Test speed 16 and 20 times/min or specified Loaded weight 100lb or 225 lb Counter LCD, 0-999,999 Air pressure force 0-150lb Machine size 136*66*140cm Force stroke 0-18 inch Weight 549kg Force angle 0-90° Power 1

BIFMA 5.1 Furniture Testing Equipment Chair Swivel Testing Machine Use Swivel Durability Tester is used for seating furniture, with load pad and accessories for the fixing of the chair,acc. to DIN 4551, EN 1335, NEN 1812 and BIFMA 5.1. It is used for office chairs, stools, gas springs, tested units are subjected either to the entire test procedure prescribed by the standards or to selected individual tests. The test axes each have their own controllers assembled in the

BIFMA 5.1 Furniture Testing Equipment Chair Seat Impact Testing Machine Application This test applies to all types of chairs. Purpose of Test: To evaluate the ability of a chair to withstand heavy impact forces on the seat. This tester is designed for dynamic and cyclic durability seat test. Seat Impact Testing Machine use aluminum frame,elegant appearance. The tester is suitable used for impact testing of all kinds furniture,such as home furniture,hotel furniture,restaurant

Professional Furniture Testing Machine Chair Armrest Testing Equipment BIFMA 5.1 Chair Armrest Testing Machine It is used to evaluate the pull-resistance ability of the armrest at parallel direction, to determine its fatigue life under parallel strength. Fix the caster, set the time, and pulling strength and time for automatically reposition. Specfications Armrest Height 650-780mm or specified Timer LCD, 0.01sec-99.9sec, 1sec-99 minute 99 second Machine Size 1200*500*1000mm

BIFMA 5.1 Furniture Testing Equipment Caster and Chair Base Durability Tester Applicability This test applies to pedestal base chairs with casters. The purpose of this test is to evaluate the ability of the chair base and casters to withstand fatigue stresses and wear caused by moving the chair back and forth standard: ANSI/BIFMA X5.1-17 Specification Load weight 102kg,plus Move stoke 800mm Block width 51mm,thickness 3.2mm,three pieces ,detachable Drive mode drive by cylinder

Seat / Sofa Durability Testing Machine BIFMA X5.1 / X5.4 With PLC Touch Screen Product information It is used to testing the sofa back, seat, and arm’s durability. Use a loading with specified form, frequency to repeatedly load on seat, back and arm surface loading. This test method is to simulate everyday use, the sofa on the long-term repeatability of the load bearing capacity. The machine adopts PLC touch screen and the program control. Can all loading frequencies, loading