Oil Analysis Testing Equipment

X-ray fluorescence sulfur analyzer Product introduction Energy dispersive X-ray fluorescence sulfur analyzer is a special analyzer based on energy dispersive X-ray fluorescence spectroscopy. The analyzer principle, design structure, instrument elements, analytical method operation flow, error and reproducibility all conform to GB/T 17040-2019 and ASTM D4294 for the determination of sulfur content in petroleum and petroleum products. Main use ◆ Measuring sulfur content of

Product Introduction Octane cetane number gauges are commonly used for octane number field analysis of power gasoline, in contrast to the motor method and the research method (RON and MON),Correspondingly, it can also be applied to the cetane number analysis of diesel oil. Test Standard GB/T503-2015, GB/T5487-2015, ASTMD2700 (motor method), ASTMD2699 (research method), ASTM D613 Specification 1. Measurement range: ⑴ Aviation gasoline: 86.0～105.0/MON ⑵ Vehicle gasoline GB: 55

ASTM D445 Kinematic Viscosity Test Equipment/Oil Analysis Product introduction Of OiL Viscosity TesterAutomatic kinematic viscosity tester in accordance with international standards ASTM D445 design and production. Instrument tester adopts a modular design, the detection part of the use of advanced sensors and high-precision AD conversion circuit, the main control part of the use of a number of industrial applications, high-reliability 16-bit RISC structure, ultra-low-power

SL-OA59 Copper Strip Corrosion Tester/Oil Analysis Tester Description Of Oil Analysis Equipment Copper Strip Corrosion Tester The copper sheet corrosion tester is suitable for the determination of aviation gasoline, jet fuel, motor gasoline, natural gasoline or other hydrocarbons, solvent oil, diesel oil, distillate fuel oil, The extent to which oil, grease, and other petroleum products corrode copper sheets. Standard GB/T5096,ASTM D130,GB/T 7326,ASTM D4048,SH/T 0232,ISO 6251

ASTM D92 Flash Point Oil Analysis Equipment Open Cup Flash Point Tester Description Of Opened Cup Flash Point Tester The fully automatic open flash point tester is designed and manufactured in accordance with the requirements specified in the People's Republic of China standard GB/T3536-2008 Determination of Flash Point and Ignition Point of Petroleum Products Cleveland Open Cup Method. It is applicable to the determination of the flash point and ignition point of petroleum

insulation oil karl fischer moisture meter coulometric titration moisture analyzer Product Description Of Coulometric Karl Fischer Titrator The automatic micro moisture analyzer meets the requirements of GB/T7600, GB/T6283, SH/T0246, SH/T0255 and other methods and standards. Karl Fischer (Coulomb) method was used to determine the content of trace water in liquids with different properties. It has the advantages of high measurement accuracy, fast speed, stable and reliable

Engine Oil Boundary Pumping Temperature Tester Product description: Automatic engine oil boundary pumping temperature tester applicable standards: GB/T9171, ASTM D4684, the use of contemporary advanced technology, set mechanical, optical electronics and computer technology in one, temperature measurement, constant temperature control. Temperature control and stability.This instrument is used to determine motor vehicle engine oil boundary pumping temperature, (low temperature)

Engine Oil Boundary Pumping Temperature Tester Product description: Automatic engine oil boundary pumping temperature tester applicable standards: GB/T9171, ASTM D4684, the use of contemporary advanced technology, set mechanical, optical electronics and computer technology in one, temperature measurement, constant temperature control. Temperature control and stability.This instrument is used to determine motor vehicle engine oil boundary pumping temperature, (low temperature)

Oil Analysis Testing Equipment Low Temperature Kinematic Viscosity Meter for Petroleum roduct Description Of Automatically Kinematic Viscosity The oil product kinematic viscosity automatic measuring instrument is a special test instrument designed and manufactured according to the national standard "GB265-88 petroleum product kinematic viscosity measurement method", which is suitable for determining the kinematic viscosity of liquid petroleum products. The instrument has the

ASTM D217 Lubricating Grease Cone Penetration Meter Product Description Cone penetration tester, in accordance with the requirements of GB/T 4985, GB/T 4509, GB/T 269, ASTM D217, ASTM D1321 test methods, suitable for the determination of petroleum wax with a needle penetration not greater than 250, solid and semi-solid asphalt materials, grease and petrolatum (petroleum jelly) with a needle penetration range from (0 ~ 500) 1/10mm. Technical Parameters Power source AC 220V±10%

SL-OA28 Dielectric Loss and Resistivity Tester for Insulating Oil Product description INSULATION OIL DIELECTRIC LOSS TESTER is a high-precision instrument, which can be applied to measure dielectric loss angle and Volume Resistivity of insulating oil etc. It is integrated by oil cup for dielectric loss, temperature-control equipment, temperature sensor, test-bridge for dielectric loss, AC trial electrical source, standard capacitor, high resistance meter and DC high-voltage

Digital Hydrometer Density Meter / Portable Electronic Densimeter With ASTM D4052 Introduction Is suitable for the mixing and emulsification of liquid/liquid in biology, physics, chemistry, cosmetics, health care products, food, etc., and the dispersion, homogenization and slurrying experiment of liquid/solid powder. It is an ideal laboratory equipment for scientific research, product development, quality control and production process applications in scientific research

Lubricating Oil Evaporating Loss Tester ASTM D5800 Base Oil Evaporation Loss Analyzer Use Noack Method Lubricating Oil Evaporation Loss Tester B Method Standards This instrument is applicable to ASTM D5800 B and SH/T 0059 standards for determining the evaporation loss of lubricating oil. Features 1.The latest technology: replace A method, the test process without Wood alloy to avoid environmental dye and personnel injury. Control mode: Embedded operating system, high-speed

Touch Screen Thermal Oxidation Engine Oil Simulation Tester Product Description Thermo-Oxidation Engine Oil Simulation Tester is used for thermo-oxidation engine oil simulation test.This test method covers the procedure to determine the mass of deposit formed on a specially constructed test rod exposed to repetitive passage of 8.5 g of engine oil over the rod in a thin film under oxidative and catalytic conditions at 285 °C. Technical Features: 1.This Thermo-Oxidation Engine

ISO4406 Portable Particle Counter For Hydraulic And Lubricating Oil/Oil Analysis Equipment SL-OA85 Portable Particle Counter Product Description: Portable particle counter is designed with the principle of photoresist method (shading method), which is a rapid detection device specially for field oil contamination level. It has the advantages of small size, light weight, fast detection speed, high accuracy, good repeatability, etc. It can work under extremely harsh conditions

Brake Fluid Balance Reflux Boiling Point Tester Equilibrium Reflux Boiling Point Apparatus SL-OA77 Brake Fluid Equilibrium Reflux Boiling Point Tester Product Description: The brake fluid equilibrium reflux boiling point tester meets the standards: SH/T0430, SH/T0089, and is suitable for measuring the equilibrium reflux boiling point of brake fluid and its base fluid components. Technical Features: This type of product adopts upper and lower structure, the upper layer is

SL-OA76 Fourier Transform Infrared Spectrometer Product Description: Fourier Transform Infrared Spectrometer (abbreviated as FTIR Spectrometer), abbreviated as Fourier Infrared Spectrometer, can be used for qualitative and quantitative analysis of samples. It is widely used in medicine and chemical industry, geology, petroleum, coal, environmental protection, Customs, gem identification, criminal investigation identification and other fields. LiCAN 9 Fourier infrared

ASTM D5453 UV Sulfur Analyzer/ Ultraviolet Fluorescence Sulfur Content Tester SL-OA73 UV Fluorescence Sulfur Meter Product Description: Ultraviolet Fluorescence Sulfur Meter is a new generation analytical instrument developed based on the combination of ultraviolet fluorescence fluorescence principle and computer technology. Suitable for the determination of naphtha, distillates, motor fuels and other petroleum products. Applied to the determination of naphtha, distillate oil

SL-OA72 Petroleum Products Chlorine Content Meter/Resistant Oil Chlorine Content Tester SL-OA72 Petroleum Products Chlorine Content Meter Product Description: The Chlorine Content Tester for Petroleum Products is designed and manufactured according to DL/T433 and GB/T388. It is suitable for measuring the chlorine content in fuel oil, and is also suitable for measuring the sulfur content in heavy petroleum products such as lubricating oil and heavy fuel. It can be widely used

SL-OA69 Copper Content Monitoring Analyzer SL-OA71 Desktop Turbidity Water Quality Detection Analyzer Product Description: It adopts single-chip microcomputer control system, high degree of intelligence, purchases international tungsten lamps, high measurement accuracy, and is equipped with a strong waterproof shell, which is widely used in electric power, petroleum, papermaking and other industries. Technical Features: Adopting today's advanced 90° scattered light test