Fire Testing Equipment

Fire Testing Equipment AQ 6103,EN 60903 Vertical Flame Tester Description According to GB/T 17622-2008 and EN 60903 the insulating glove fire resistance test device is developed, which is suitable for live work insulating gloves fire resistance test. Performance characteristics 1. Standard stainless steel box with transparent observation window can detect flame spread rate in time. 2. One stopwatch timer and one ignition device each. 3. Needle valve regulates the height of

Wire Flame Test Chamber For Electric Cables Under Fire Conditions Circuit Integrity Standards IEC 60331-21 Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV Specification 2. Cable and cable line integrity combustion test machine design principle: The cable and cable integrity fire tester is divided into three parts: the combustion box, the combustion frame, and

BS6387 Test Device for Cable Required to Maintain Circuit Integrity under Fire Conditions Summary This test device for resistance to fire of cables required to maintain circuit integrity under fire conditions. It is applicable to cables of rated voltage not exceeding 600/1 000 V and of overall diameter less than or equal to 20 mm. Complies to Standard BS6387 The test given in this British Standard is applicable to cables having two or more insulated conductors, whether or not

Wire & Cable Bundle Flaming Tester Ladder Type GB18380.31:2008, IEC60332-3-10:2000 Application Apply to evaluate suppression ability of spread of fire for bundles installed wires and cables ,under specified conditions. Standard According to IEC60332-3-10:2000,and GA306.1-2007. Main components Testing chamber, electric control system, air source, ignition source flew control system (propane gas and air compressed gas), steel elevator, Fire extinguishing devices, emissions

PLC Control Bunched Cable Vertical Flammability Tester With UL 1685 Standards Bunched Cable Vertical Flame Spread Testing Machine is designed accordance with the relevant provisions of UL1685,GB18380.3 standard about wire and cable burning test requirements. And meet with IEC 60332-3-10, KS C IEC 60332-3-21 ~ 25 (A ~ Class D) standards. Applications Bunched Cable Vertical Flame Spread Tester is an equipment which used to test the vertical installation of a bunched cable or

SAE-J 1128-2005 Vertical Flammability Tester for Wire / Cable 600 ± 25mm Length Application Single wire / cable vertical combustion tester mainly for the conductor diameter greater than 8mm (section area is greater than 0.5mm2) or less than 8mm (section area less than 0.5mm2) of single wire and cable flammability evaluation. Suitable for lighting equipment, low-voltage electrical appliances, household appliances, electrical tools, electric motor, electric tools, electronic

Wire and Cable Fire Resistance Test Device Product introduction Detect the fire resistance of cables for wiring or power grids, burn in flames not lower than 750°C and 830°C, and detect cables to maintain the integrity of the circuit. The complete set of tests includes the fire resistance test methods specified by BS 8491. Technical parameters 1. Separate design of gas and test test bench and circuit and console, safe and reliable; 2. Standard sample support frame, metal ring

Wire and Cable Burning Test Product introduction Wire and cable burning level tester is suitable for measuring the flame-retardant properties of single plastic wire, control, cross-linking, elevator, marine, mining cable, etc., conforming to the standard JASO-D 618 This test equipment uses a high-pressure igniter to automatically ignite, which is exquisite in shape and resistant to smoke corrosion. Digital display time, automatic control of test program, easy to use, stable

3 Metre Cube Smoke Density Apparatus for Wire and Cable and Fiber Optic Cable Product introduction 3 Metre Cube Smoke Density Apparatus is used formeasuring the emission when the cable or optical cable is placed horizontally underthedefinite firecondition. The equipment comprises a cubic enclosure and a photometric system. The specified standard fire source (ethanol 90±1%, methanol 4±1% and distilled water 6±1%) 1L±0.01L is burned. IEC 61034 - 1 & 2 Measurement of Smoke

Single Cable Vertical Flame Tester for Vertical Flame Spread Test Product introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a single insulated wire or cable is a bench scale test to determine the resistance of a single cable to a 1kW flame application. It conforms to IEC60332-1-2 (flame propagation) and IEC60332-1-3 (test for flaming droplets). Product parameters 1.Stainless steel box, the height of 1300mm, width of 300mm, depth of

Wire and Cable Fire Resistance Tester for Detecting the Fire Resistance of Wiring or Power Grid Cables Product introduction This test apparatus to be used for testing cables required to maintain circuit integrity when subject to fire alone or fire with shock where the test condition is based upon flame with a controlled heat output corresponding to a temperature of at least 750˚C or fire with shock at a temperature of at least 830 °C. Technical parameters 1.Heat Source : AGF

DIN EN 50399:2022 Wire and Cable Heat Release Test Device with Stainless Steel Two-Way Speed Probe Product introduction EN 50399 specifies the apparatus and methods of test for the assessment of vertical flame spread, heat release and smoke production of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. EN 50399 details the apparatus and the arrangement and calibration of the instrumentation to be installed in order to measure the

Anti-Liquid Molten Metal Splash Test Device Product Profile The thermal penetration resistance of protective clothing materials used to prevent a large number of molten metal splashes was evaluated by the anti-liquid molten metal splashing test device developed according to ISO9185 standard. Medium such as molten aluminium, molten cryolite, molten copper, molten iron and spatter of molten low carbon steel directly acted on the surface of the material. The penetration

Molten Metal Splashes Impact Test Apparatus Product Introduction Projections of molten metal drops at a point on a vertical oriented test specimen and measurement of the number of the drops required to cause a 40 K temperature rise in a sensor behind the specimen.​ Features Drop guide to collect the drops and to guide them towards the vertically oriented test specimen. Senor for measuring the temperature linked to a recording device. Holding frame and counterweights for the

Power Cable Busway Flammability Test Furnace Uses Suitable for the test of flame retardant, fireproof and fire resistance of busbar trunking system (busbar trunking) Technical parameters 1. Working voltage: AC380V±10% 50Hz; power consumption: 5KW 2. Furnace pressure measurement range: 0-100Pa measurement accuracy: 3. Air flow: 0-50m3 / min measurement accuracy: ≤ ± 0.5 m3 / min 4. Combustion gas source: propane, liquefied gas 5. Gas tank capacity: 50kg × 4 6 Test temperature:

Wire and Cable Scratch Resistance Testing Machine Technical standard Applicable to the standard "JASO D611-94 low-voltage wire and cable test standard for motor vehicles", "JBT 8193 low-voltage wire and cable standard for road vehicles", "TBT 1484.1-2001 railway locomotive vehicle cable - rated voltage 3KV and below cable", "DIN72551- 5/1991 Road vehicles - low-voltage cables - single-core, unshielded, thin-walled, polyvinyl chloride (PVC) insulation - test req

Wire and Cable Vertical Horizontal Burning Test Machine Experimental principle This machine is suitable for the flammability test of various wire and cable insulation coating materials, printed circuit board materials, IC insulators and other organic materials. During the test, the test piece is placed on the top of the flame, burned for 15 seconds, extinguished for 15 seconds, repeated After 5 times, the test piece is incinerated, and the burning, extinguishing time and

Large Combustion Cabinet / Carge Combustion Box Uses Large combustion cabinet / large combustion chamber is strictly in accordance with UL1581 sect 1080.1~1080.14 standard, and fully comply with VW-1 (V-ertical-specimen) Flame Test. Economically applicable and widely used by the wire and cable industry Experimental principle: The parameters of the large combustion cabinet/large combustion chamber are as follows: The whole test is carried out in a laboratory with a volume of 4

Bundle Cable Burning Test Machine Uses Suitable for flame retardant wire and cable burning experiments Technical Parameters 1. Experimental device 1.1 Test chamber: The experimental device shall be a self-supporting box of width (1000 ± 100) mm, depth (2000 ± 100) mm and height (4000 ± 100) mm. The back wall and both sides of the test box shall be heat insulated with a heat transfer coefficient of approximately 0.7 W?m-2?K-1, a USU304 stainless steel plate of 1.5 mm thickness

UL1581 Wire Heating Deformation Testing Machine Uses Used to test the degree of thermal deformation of materials such as plastic and wire skin Technical Parameters Test device: 3 groups Temperature: normal temperature ~300 °C Weight: 50, 100, 200, 500, 1000g each three Scale: Japan MITOTOYO 0.01/10mm Volume: inner box size: length 600mm * depth 400mm * height 360mm Outer box size: length 1100mm* width 620mm* height 1730mm Inner box material: SUS#304 stainless steel. Outer box