Oil Immersed Power Transformer

110kV Single Phase / Three Phase Electrical Oil Immersed Power Transformers Overview: Oil immersed power transformers can operate with higher power ratings and higher voltage applications than their cast resin counter parts. Oil cooled transformers are widely used in applications of more than 20000kVA. Where fire safety is an issue or an environmentally friendly solution is preferred we can supply midel filled transformers as an alternative. Range of Products : Oil cooled

20kv Oil immersed Power Transformer / Distribution Transformer Overview S9-M/S10-M/S11-M/S13-M three phase oil-immersed full sealed distribution transformer differs from ordinary oil-immersed transformer, it cancels oil conservator and heat-sink cooling by ripple plate radiator in oil tank, which can compensate the increase and decrease of oil volumetric by elastic breathing. All series product are suitable in 10KV, 20KV, 35KV power transmission and distribution system, can

35KV Electric Oil Immersed Power Transformer Industrial Power Transformer Product Description: Oil-immersed power transformer product designed and developed on the basis of absorbing the most advanced technology at home and abroad. It features high reliability, low partial discharge, low noise, low loss and high anti-short circuit capability. Its excellent and reliable performance have won customers' as well as experts' reorganizations and appreciations. Reliable Structure: 1

12kV 800KVA Outdoor Three Phase Oil Immersed Electric Power Transformer NINGBO TIANAN (GROUP) CO., LTD. 1. General: 2. Application: 11KV class transformers are widely used in power transmission and distribution stations, industry plants, Generation Setup Unit (GSU). 3. Material ► Oxygen-free copper lines of lower resistivity, which will become smoother and burr-free after series of additional surface treatment, so the load loss of our transformer is lower and the electric

S-M-2500kVA/13.8kV GENERATOR TRANSFORMER General: 2.1 This manual is applicable for three phases oil immersed distribution transformer produced by Tianan Electric as capacity 3150KVA and below, voltage rate 35KV and below, including three phases oil immersed distribution transformer with oil conservator and hermetically sealed distribution transformer. 2.2 Normally, this transformer is applicable for outdoor and indoor power distribution system. And its service continuity is

10kV Oil Immersed Off - Load Tap Changer Power Distribution Transformer General: 11KV class transformers are widely used in power transmission and distribution stations, industry plants, Generation Set-up Unit (GSU). They have the characteristic of high efficiency, low loss and maintenance free. Structural Features : ► Iron core The iron core is made of cold rolled grain oriented silicon steel sheet. Laminations are cut to length on GEORG cut-to- length line with step-lap cut

200 kVA 33kV Oil Immersed Transformer – Ideal for 415V Distribution Networks Product Overview The Oil Immersed Power Transformer model S-200/33-0.415 is a three-phase electrical device designed for voltage step-down in medium-voltage distribution networks. With a rated capacity of 200 kVA and a voltage rating of 33 kV / 0.415 kV (tapping range ±2*2.5%), this transformer is well-suited for light industrial facilities, commercial complexes, and rural electrification projects.

Compact Oil Immersed Power Transformer Built for flexible placement and long-term reliability in electrical networks Ease of Installation and Maintenance The transformer features a compact and sturdy construction, allowing flexible placement in outdoor substations or indoor electrical rooms. Accessible oil filling and draining ports Temperature monitoring devices Pressure relief systems These design elements facilitate routine inspection and servicing, helping to reduce

Product Description: One of the main features of this transformer is its ability to operate efficiently at high altitudes. It is capable of functioning up to 1,000m above sea level, making it suitable for use in mountainous regions. Additionally, it can operate at both 50Hz and 60Hz frequencies, making it versatile enough to be used in a variety of settings. With a capacity range of 50-50000KVA, this transformer is capable of handling a wide range of voltage and current

Meta Title: S-M-750/13.8-0.48 Oil Immersed Distribution Transformer | 750KVA 60Hz 13800/480V | YNd11 Meta Description: China manufacturer of Oil Immersed Distribution Transformer S-M-750/13.8-0.48. 750KVA rated capacity, 13800/480V, 60Hz, YNd11 connection, ONAN cooling. GB certified for industrial and commercial power distribution. H1 Title: S-M-750/13.8-0.48 Oil Immersed Distribution Transformer – 750KVA, 60Hz, 13800/480V, Three-Phase Overview: The S-M-750/13.8-0.48 Oil

S-M-750/13.8-0.48 Oil Immersed Power Transformer - 750KVA, 13800/480V, 60Hz, Three-Phase The S-M-750/13.8-0.48 Oil Immersed Power Transformer is a three-phase, 60Hz power distribution unit engineered for step-down transformation from medium-voltage primary networks to low-voltage secondary distribution systems. Manufactured in China under GB certification, this unit delivers a rated capacity of 750KVA with primary and secondary voltages of 13800V and 480V respectively.

Meta Title: S11-M-800/15 Oil Immersed Power Transformer | 800KVA 3-Phase 50Hz | Dyn11 Meta Description: China manufacturer of Oil Immersed Transformer S11-M-800/15. 800KVA rated capacity, 52kV insulation, 5.43% impedance. GB certified for distribution grids and industrial substations. Get the technical datasheet. H1 Title: S11-M-800/15 Oil Immersed Power Transformer – 800KVA, 50Hz, 3-Phase Overview: This S11-M-800/15 Oil Immersed Transformer is a 3-phase, 50Hz power

Product Description: The cooling method of this transformer is ONAN (Oil Natural Air Natural) and ONAF (Oil Natural Air Forced), which ensures efficient heat dissipation and prolongs the lifespan of the transformer. ONAN cooling is used for transformers that operate at low power levels, while ONAF cooling is used for high-power applications. The Oil Immersed Transformer is available in different trade terms, which will be determined based on the buyer's requirements. The

Product Description: The capacity range for the Oil Immersed Distribution Transformer is between 50-50000KVA. This transformer is available in different sizes to meet the needs of different applications. The larger the capacity, the more power it can handle, making it suitable for large-scale projects. The Oil Immersed Distribution Transformer uses both ONAN and ONAF cooling methods. ONAN stands for Oil Natural Air Natural, which means the transformer uses natural air flow

Product Description: Designed with ONAN cooling and a thermal class of A, this transformer is built to withstand even the most demanding applications. With a rated current of 16.73/481.1 A, it provides reliable performance day in and day out. Whether you need to power a small residential neighborhood or a large industrial complex, our three-phase Oil Immersed Transformer is up to the task. And with an oil grade of 45, it provides optimal performance and long-lasting

Product Description: With a rated voltage of 13.8/0.48 KV and a rated current of 16.73/481.1 A, our Oil Immersed Distribution Transformer delivers reliable and efficient power distribution to your facility. Its three-phase design ensures consistent performance and power delivery, while its thermal class of A ensures that it can withstand high temperatures and maintain its performance over time. Our Oil Immersed Distribution Transformer is also designed for easy installation

Product Description: The separate parts of a combined transformer share a common set of cooling system,conservator and piping system. For on-load regulating transformer, there is only one set of on-load regulating mechanism, the occupied area of the transformer on site is only slightly larger than that of the traditional transformer. In delta connection, LV leads of the combined transformer, firstly connected to be a delta type in corrugated lead pipe on the top of the tank,

Product Description: This transformer has a No-load current of 0.5/0.4% and a No-load loss of 53/82/90 KW. These attributes ensure that the transformer operates efficiently and reduces energy losses during operation. This is particularly important for industrial and commercial applications where energy costs are a significant concern. The Oil Immersed Power Transformer has a transport weight of 3x35000/3x44500/3x38000(filling With Nitrogen) kg. This weight is ideal for easy

Technical Parameters: Product Attribute Value Product Name Oil Immersed Power Transformer Insulation Fluid Mineral Oil (No PCB) Secondary Voltage 415V, 400V, etc. Environment Outdoor Frequency 50Hz, 60Hz Altitude Up to 1,000m above sea level High Voltage 11kV Insulation Level Class A Material Cu/Cu, Al/Al Type Single Phase, Three Phase Capacity Range 50-50,000KVA Applications: Industrial Applications: The Oil Immersed Power Transformer is commonly used in industrial

Product Description: The transformer is available in two different materials, Cu/Cu and Al/Al. The Cu/Cu transformer is made of copper windings and core, while the Al/Al transformer is made of aluminum windings and core. Both materials are durable and can withstand harsh environmental conditions. The transformer is designed to provide a secondary voltage of 415V, 400V, and other voltages as per the customer's requirement. It is suitable for use in various applications,