Flammability Testing Equipment

Semi-Automatic Pneumatic Marking Label Mark Label Heat Press Cloths Printer Machine Introduction Pneumatic Rubber Dumbbell Cutting Machine / Sample Cutter used pneumatic as motive power and it can operate once connect to the air pressure source. The machine can be appliable in cutting rubber, adhesive tape, leather and so on. The experience will use dumbbell specimen and other special material, such as laminate board and series of composite material.Easy and safety to operate

Semi-Automatic Pneumatic Marking Label Mark Label Heat Press Cloths Printer Machine Introduction This machine uses air pressure as the power, only need to connect the air pressure source can be operated, suitable for laboratory cutting rubber, tape, leather ... It is suitable for laboratory cutting of rubber, tape, leather, etc., test dumbbell specimen, and other special materials, such as Meneuve board or various composite materials. It can also be used as a small press.

Pneumatic Sample Slicer Rubber Dumbbell Specimen Sample Cutter Sample Cutting Machine Introduction This machine uses air pressure as the power, only need to connect the air pressure source can be operated, suitable for laboratory cutting rubber, tape, leather ... It is suitable for laboratory cutting of rubber, tape, leather, etc., test dumbbell specimen, and other special materials, such as Meneuve board or various composite materials. It can also be used as a small press.

Laboratory Rubber Mixing Machine Open Type Two Roll Mill Equipment Applications: Water Cooled Two Roller Used Rubber Mixing Mill Price is suitable for plastic industry polymer material mixing and processing such as, PVC, color master batch. Making the raw material and compound mixing, and achieve the required color and quality. The machine adopts special heated mold, roll surface temperature uniformity, never take off a layer, sample thickness can be mixed, the machine safety

Electric Heating Water Cooling Lab Two Roll Open Mixing Mill PLC Control Applications: Water Cooled Two Roller Used Rubber Mixing Mill Price is suitable for plastic industry polymer material mixing and processing such as, PVC, color master batch. Making the raw material and compound mixing, and achieve the required color and quality. The machine adopts special heated mold, roll surface temperature uniformity, never take off a layer, sample thickness can be mixed, the machine

Rubber Plastic Mixing Machine Lab Rubber Two Roll Mill Price Two Roller Mixer Applications: Water Cooled Two Roller Used Rubber Mixing Mill Price is suitable for plastic industry polymer material mixing and processing such as, PVC, color master batch. Making the raw material and compound mixing, and achieve the required color and quality. The machine adopts special heated mold, roll surface temperature uniformity, never take off a layer, sample thickness can be mixed, the

Solid Material Smoke Density Tester Combustion Testing Equipment Description This instrument has been established for many years and is widely used in all industrial sectors for the determination of smoke produced by solid materials and components mounted in a vertical position in an enclosed chamber. This widely used test instrument measures the specific optical density produced by a material when a substantially flat sample, up to 25 mm thick, is exposed vertically to a 25

GB/T 20284 EN 13823 Single Burning Tester For Building Materials Flammability Test Method Application Test method for determining the reaction to fire performance of building materials and products (excluding flooring) and products specified in European Commission Resolution 2000/147/EC. Standard EN 13823 Fire response test for building products - Thermal attack of building products other than flooring by a single burning article GB/T 20284 Single burning test for building

NBS Plastic Smoke Density Tester Description The smoke density box is designed and developed according to lSO5659 related standards. Used in conjunction with a conical radiation furnace the heat flux in the box can be as high as 50 kw / m2, and the sample can be positioned laterally to test the sample mass loss rate. This is also in line with the latest mo test terms. Measure the density of the smoke cloud when the sampe is measured with or without a forward flame in a

ASTM D1929 Ignition Temperature Testing Equipment For Plastic Sample Intruduction Plastic ignition temperature tester according to GB4610-2008 plastic hot air furnace method of determining the ignition temperature plastic ignition temperature tester design and manufacture, in full compliance with GB4610-2008, while meeting the requirements of ISO871-2006 standards, used to assist in testing the burning and flame retardant properties of plastic materials. GB4610-2008 version

Test Furnace Lab Testing Equipment , ASTM ISO871 Vertical Flammability Test Intruduction Plastic ignition temperature tester according to GB4610-2008 plastic hot air furnace method of determining the ignition temperature plastic ignition temperature tester design and manufacture, in full compliance with GB4610-2008, while meeting the requirements of ISO871-2006 standards, used to assist in testing the burning and flame retardant properties of plastic materials. GB4610-2008

NFPA 701-2004 Vertical Burning Performance Test Equipment For Toys Application NFPA 701-2004 Flame Retardant Performance Tester, according to NFPA 701#1 test method, to determine the flame retardant performance of curtains and other hanging fabrics, suitable for single or multi-layer fabrics. It is not suitable for fabric densities greater than 700 g/m2 (21 oz/yd2 ). Specification 1. open combustion chamber structure; 2. The chamber is made of calcium silicate board with

Stainless Steel Flame Spread Ability Tester For Films And Textiles 220V 30A Product introduction The flame spread tester is used to determine the lateral flame spread performance of building products. The flame spread performance/flame spread speed can evaluate the fire retardant performance of materials. The device measures the combustion of a material at a given radiant heat level by radiating heat through a gas-fired radiation panel and using an imported heat flow meter to

EN 13823 GB/T 20284 Single Burning Tester For Building Materials Horizontal Application Test method for determining the reaction to fire performance of building materials and products (excluding flooring) and products specified in European Commission Resolution 2000/147/EC. Standard EN 13823 Fire response test for building products - Thermal attack of building products other than flooring by a single burning article GB/T 20284 Single burning test for building materials and

ASTM Solid Material Smoke Density Tester , Combustion Testing Equipment Description This instrument has been established for many years and is widely used in all industrial sectors for the determination of smoke produced by solid materials and components mounted in a vertical position in an enclosed chamber. This widely used test instrument measures the specific optical density produced by a material when a substantially flat sample, up to 25 mm thick, is exposed vertically

50hz Minimum Combustible Dust Minimum Ignition Temperature Tester Introduction: This machine is a way of testing the sensitivity of the ignition that the dust cloud is in the heated environment. When a lot of dust is exposed in heating the air and the air temperature is high enough, it may lead to spontaneous combustion. This method can test the minimum ignition temperature of combustible dust cloud. Standard: EN 50281-2-1: Methods for determining the minimum ignition

ISO/IEC 80079-20-2 Combustible Dust Minimum Ignition Temperature Tester Introduction: This machine is a way of testing the sensitivity of the ignition that the dust cloud is in the heated environment. When a lot of dust is exposed in heating the air and the air temperature is high enough, it may lead to spontaneous combustion. This method can test the minimum ignition temperature of combustible dust cloud. Standard: EN 50281-2-1: Methods for determining the minimum ignition

CPAI_84 Tent Flame Retardant Tester YY-84cpAl tent flame retardant tester according to CPAI_84_1995 account tent flame retardant test. Vertical method of the standard provisions of the simulation test items. YY-84cpAl tent flame retardant tester is to install the sample on the stainless steel sample clamp, hanging in the test cabinet, the lowest point of the sample is 20mm away from the upper end of the fire source tube; adjust the fire source height to 38mm (±3mm) (the test

ISO 6941/ISO 6940 Fabric Flame Retardant Tester Description: Multi-purpose Flammability Tester, to determine the flammability resistance of textile fabrics and for the flammability test of toys and toy materials. Its vertical test frame with changeable specimen holders and burner covers offer a wide range of vertical oriented textile fabrics. This machine meet almost all the BS, EN, ISO and other similar standards which is defined as a test method that a vertical oriented

Vertical Combustibility Tester Vertical Flame Test Equipment ASTM D1230 Horizontal Vertical Burning Tester vertical combustibility tester vertical flame test equipment 45 degree flammability tester Description: 45 degree flammability tester, check the flammable performance of the textile Stainless testing room with glass window,after ignition automatic time (0.01 second precision) automatic or manual ignition. Parameters: Manual firing device, including sample holder and