Flammability Testing Equipment

ASTM D 1230 45 Degree Textiles Automatic Flammability Testing Equipment Product Parameters Spread timing range: 0-999 resolution: 0.01s Ignition time: 1s or any setting The model of igniter shall comply with ASTM D 1230 Size: 400mm x 300mm x 500mm Power supply: 220V/50Hz 2A Product Features Automatic timing after the glass observation window of stainless steel test room is ignited (0.01 second accuracy) Automatic or manual ignition device, sample brushing device and nylon

BS EN 13823 Single Burning Item Test Apparatus (SBI) for Building Materials The Single Burning Item (SBI) test apparatus is designed to evaluate the fire performance of building materials (excluding flooring materials) under controlled thermal attack conditions. This sophisticated equipment provides comprehensive analysis of material combustion behavior through automated testing and precise measurements. Key Testing Capabilities Determines performance of building materials

ISO5660 Cone Calorimeter Heat Release Tester Machine for Building Materials 220V 1 Year Warranty Product Overview The ISO5660 Cone Calorimeter measures heat release rate by analyzing oxygen concentration in combustion product streams. This critical parameter is essential for predicting fire hazards and developing effective fire retardant treatments. Key Features Radiation Cone: 5kW heating power with 100kW/m² radiation intensity, equipped with three thermocouples for

Electric Cables Halogen Acid Gas Testing Apparatus The Halogen Acid Gas Tube Furnace is designed to test the acidity of gases released during combustion from cable or optical cable component materials. This equipment determines the acidic properties of cable materials and measures the concentration of halogen acid gas volume, pH, and conductivity values. Compliance Standards GB/T 17650.1~2-1998, IEC 60754-1/2-1994, EN 50305, BS 6853, GB/T 19666-2005, GA 306.2-2007, UL 2556

ISO3795 FMVSS 302 Road Vehicles Interior Materials Horizontal Flammability Tester Product Overview This horizontal flammability tester is designed to evaluate the burning characteristics of interior materials used in road vehicles, ensuring compliance with international safety standards for flame retardancy. Key Features Teflon surface processed combustion chamber for corrosion resistance Separate electric control chamber for enhanced safety Viewing window made of heat

Glow Cable and Wire Tester Machine Glow Wire Tester Product Overview The glow wire testing machine is commonly used for electrical engineering components and solid electrical insulation materials or other solid combustible materials. This equipment conforms to GB/T516910-13, EC60695-2-10-2-1/3, GB2099, VDE0620, GB4706 and UL817 test standards. Test method: The standard resistance wire ring is heated to the specified temperature, and then the hot wire and test sample are

Electronic Limiting Oxygen Index Test Apparatus 220V with 1 Year Warranty Technical Specifications Item Name Fully Automatic ASTM D2863 Building Material Limiting Oxygen Index Tester Oxygen concentration measurement range 0-100% Resolution 0.1% Accuracy +/-0.2% Response time

IEC 60754 Electric Cables Corrosion Halogen Acid Gas Release Tester The Electric Cables Halogen Acid Gas Release Tester is designed to measure the acidity of gases released during combustion from cable or optical cable component materials. This equipment processes cable materials using a Prius tube furnace and analyzes the resulting gases to determine pH values, conductivity, and halogen acid gas concentration. Compliance Standards Compliant with GB/T17650.1-1998, GB/T17650.2

ISO 9239-1 ASTM E 846 Flooring Radiant Heat Flux Test Apparatus Tester Machine Product Overview The ISO 9239 Radiant Flooring Panel test is the cornerstone of the flooring materials reaction to fire tests in the Euroclass system. The apparatus measures the spread of flame of the sample under thermal exposure using a radiant heat ignition source. The thermal exposure simulates a fire growing in the room of origin that radiates through a door opening onto flooring in an

220V Compliant Electronic SPI Flammability Testing Equipment with 1-Year Warranty Product Overview This 16 CFR Part 1611 compliant SPI Flammability Tester is designed for evaluating the flame retardant properties of polyethylene plastic film materials under standardized testing conditions. Applications This instrument is suitable for testing the flame retardant properties of polyethylene plastic film materials, including: Non-rigid and unsupported polyethylene plastic film

EN817 High-Precision Faucet Life Cycle Testing Machine This computer-controlled faucet life cycle testing machine with stepper motor drive simulates daily lifespan testing of customer-provided faucets. Capable of testing two faucets simultaneously with separate counting for each group, it features automatic solenoid valve detection, automatic water addition, water circulation, and adjustable test speed. Technical Specifications Control System: Computer-controlled with six

EN817 Professional Faucet Switch Life Tester This advanced faucet life testing system simulates daily operational cycles to evaluate the lifespan of customer-provided faucets. The unit features dual-station simultaneous testing capability with independent counting for each faucet group. An automated system controls water circulation, detection, and adjustable testing speeds. Technical Specifications Control System Computer-controlled with six-digit counter (0-999,999 cycles),

EN817 Professional Water Flow Testing Machine YYE099 Advanced automatic faucet flow rate testing equipment with PLC control, thermal printer, LED lighting, and exhaust fan. Designed for comprehensive testing of hoses, nozzles, pipes, and angle valves. Application Scope Ideal for testing water hoses, nozzles, pipes, angle valves, and similar components with flow rates up to 30 liters/minute and dynamic pressure less than 0.6 MPa. Technical Specifications Frame Construction

EN817 Water Tap Flow Tester - Automatic Faucet Flow Rate Testing Equipment Product Overview Professional automatic faucet flow rate testing equipment featuring PLC control, thermal printer, LED lighting, and exhaust fan. Designed for comprehensive testing of water hoses, nozzles, pipes, and angle valves. Application Scope Ideal for testing various plumbing components including water hoses, nozzles, pipes, and angle valves. Suitable for flow rates up to 30 liters/minute with

45 Degree Flammability Tester - Best Textile Testing Equipment For Quality Control In Fabrics Product Overview The 45-degree flammability tester is essential textile testing equipment designed for quality control in fabrics, ensuring compliance with fire safety standards across various industries. Key Specifications Attribute Value Place of Origin Guangdong, China Customized Support OEM, ODM Power Electronic Brand Name YUYANG Model Number YY054 Material Stainless Steel

YY-121 Building Materials Difficult Flammability Test Equipment The YY-121 Building Materials Difficult Flammability Test Apparatus is designed for flame retardant performance testing of building materials. This computer-controlled equipment offers high automation for accurate fire resistance performance evaluation. Compliance Standards GB/T 8625 Test method of difficult-flammability for building materials DIN 4102-15 Fire behavior of building materials and elements

Building Materials Ignitability Flammability Tester for Single Flame Source Test Ignitability test, also called single-flame source test. Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250) mm long by (90) mm wide. 45°-tilted burner is advanced horizontally until the flame (length 20 mm) reaches the pre-set contact point with the test

Fire Testing Machine for Building Materials YY410 UL790 Fire Performance Tester for evaluating surface burning characteristics of building materials and photovoltaic cell modules. Scope of Application This equipment evaluates roofing materials exposed to simulated exterior building fires, assessing fire resistance at distances of 1.82m, 2.4m and 3.9m to Class AC. Also suitable for testing photovoltaic cell module fire resistance. Compliance Standards UL 1730 Smoke Detector

Flammability Tester Fire Propagation Test Apparatus Product Description This apparatus is designed to determine surface burning characteristics of building materials and flame propagation rate of exposed surfaces such as walls and ceilings (including solid plastics), while simultaneously measuring smoke density. Application This test method applies to exposed surfaces including ceilings or walls, provided the materials or assemblies can support themselves or be supported

Biological Safety Cabinet Class II A2 Product Description Class II A2 biological safety cabinet is biological safety isolation equipment used in biological safety labs. It can prevent harmful or unknown biological particulate aerosol from escaping during operation, suitable for working with microbiological research in the absence of volatile or toxic chemicals and radionuclide. Safety Performance UV sterilization function and timing function can be set by appointment