PLC Programmable Logic Controller

PLC Programmable Logic Controller GE FANUC IC660CBB903K Series Six BUS CONTROLLER This GE Fanuc IC660CBB903G BUS Control Module without Diagnostics is new from surplus stock. This unit ships in the manufacturer's original packaging with standard documentation and accessories. Accessories Include: • 44A713909-003: 150 Ohm Bus Terminating Plug • 44A713909-004: 75 Ohm Bus Terminating Plug • GFK-0171: Series Six Bus Controller Manual • GEK-90486: Genius I/O System Manual • GFK

PLC Programmable Logic Controller SCHNEIDER ELECTRIC Modicon 140CPU65260​ Specifications Manufacturer: Modicon Quantum Series: Quantum CPUs Weight: 4 lb Product or component: Unity processor Clock frequency: 266 MHz Number of slots: 10 16 2 4 6 Number of racks: 2 - local rack(s) Number of distributed I/O station: 63 station(s) - 1 rack(s) - 1 distributed network(s) Number of remote I/O station: 31 - 2 remote rack(s) Discrete I/O number: 8000 inputs, 8000 outputs - distributed

PLC Programmable Logic Controller GE FANUC IC697CPU782E CENTRAL PROCESSING UNIT MODULE IC697CPU782 Features
Supports floating point calculations
Single slot CPU.
12K inputs and outputs (any mix).
Up to 8K analog I/O.
0.4 microseconds per boolean function.
16 MHz, 80386DX microprocessor.
Supports IC660/IC661 and IC697 I/O products.
Programmed by MS-DOS or Windows software products running on Windows 95 or Windows NT over Ethernet TCP/IP or through the SNP port.

GE Fanuc two built-in Serial Ports .22msec/K IC693CPU351-FM CPU Module CPU MODULE 25MHZ QUICK DETAILS Description: CPU 351 Module 4K I/O 8 Racks Type of Device: CPU 351 Module Operating Temperature: 0 to 60 degrees C (32 to 140 degrees F) ambient Total Baseplates per System: 8 (CPU baseplate + 7 expansion and/or remote) Load Required from Power Supply: 890 milliamps from +5 VDC supply Processor Speed: 25 MegaHertz Processor Type: 80386EX Typical Scan Rate: 0.22 milliseconds

PLC Programmable Logic Controller IC693CMM321 GE FANUC SERIES 90-30 Ethernet Interface Module The Analog Current/Voltage Combination Input/Output module provides up to 4 differential input current or voltage channels and 2 single-ended output channels with either current loop outputs or voltage outputs. Each channel can be individually configured for the current or voltage range, as applicable, required for your application. All module configuration is done through software,

Mitsubishi PLC MELSEC-Q Series Programmable Logic Controller Q173DSCPU Q172DSCPU Motion Controller CPUs Model Number Q173DSCPU Q172DSCPU Stocked Item S S Number of Control Axes 32 axes 16 axes Operation Cycle (Operation Cycle Setting) 0.2ms, 0.4ms, 0.8ms, 1.7ms, 3.5ms, 7.1ms Control Modes PTP (Point to Point) control, Speed control, Speed-position control, Fixed-pitch feed, Constant speed control, Position follow-up control, Speed control with fixed position stop, Speed

Mitsubishi Melsec PLC FX3GE Series FX3GE-24MT FX3GE-24MT/ES Logic Controller MELSEC-F Series FX3G/FX3GE Main Units and Configuration FX3GE - All-In-One Control Controllable I/O: 24 - 256 points (with CC-Link remote I/O) Main Unit I/O: 24/40 points Quick Details • Embedded Ethernet communications port • Embedded analog I/O (2 inputs, 1 output) • Integrated real-time clock • Built-in USB port for the programming communication function to enable high-speed communication at

Mitsubishi Melsec PLC FX3G Series FX3G-40MR/ES-A Programmable Logic Controller MELSEC-F Series FX3G/FX3GE Main Units and Configuration FX3G - Customized Control Controllable I/O: 14 - 256 points (with CC-Link remote I/O) Main Unit I/O: 12/24/40/60 points FX3G Main Units with 14 I/O ModelNumberFX3G-14MR/DSFX3G-14MR/ESFX3G-14MT/DSSFX3G-14MT/DSFX3G-14MT/ESSFX3G-14MT/ESStocked ItemSSSSSSCertificationUL • cUL • CE (EMC)IntegratedInputs/Outputs141414141414PowerSupply (V)24VDC100

Mitsubishi Melsec FX3UC PLC Programmable Logic Controller FX3UC-16MT/D Quick Detail PLC FX3U - Top of the Line Controllable I/O: 16 - 384 points with CC-Link or AS-i remote I/O Main Unit I/O: 16/32/48/64/80/128 points FX3U Main Units with 16 I/O Model Number FX3U-16MR/DS FX3U-16MR/ES FX3U-16MT/DSS FX3U-16MT/DS FX3U-16MT/ESS FX3U-16MT/ES Stocked Item S S S S S S Certification UL • cUL • CE (EMC) Integrated Inputs/ Outputs 16 16 16 16 16 16 Power Supply 24VDC 100-240VAC 24VDC

Mitsubishi Melsec FX3UC PLC Programmable Logic Controller FX3UC-16MT/D Quick Detail PLC FX3U - Top of the Line Controllable I/O: 16 - 384 points with CC-Link or AS-i remote I/O Main Unit I/O: 16/32/48/64/80/128 points Product Details All-in-one CPU, power supply and I/O. Includes many upgraded features from the FX2N, including high expandability using Expansion Boards and Special Adapters to add functionality. Fast Instruction Times Basic Instructions: 0.065 µs / instruction

PLC MITSUBISHI MELSECNET/H Module Q series QJ71LP21G Programmable Controller CPU Specifications: Condition New Weight (kg) 0.11 Our Part Number QJ71LP21G Brand Mitsubishi Manufacturer Range Q Series Short Description Mitsubishi QJ71LP21G Q Series Melsecnet/H Master/Local, Gi 50/125 Fibre Optic Cable Range Overview: Networking modules are available for a wide range of networks: Ethernet Modbus/TCP CC-Link Profibus DP DeviceNet CANopen AS-Interface MELSECNET/H SSCNET111 Further

MITSUBISHI PLC Q00JCPU Q00UJCPU Programmable Logic Controller 8k steps Program capacity Features of the MELSEC System Q CPU modules The MELSEC System Q offers a wide range of CPU modules: ●Basic model QCPU Model Program capacity Number of I/O points Q00JCPU 8k steps 256 points Q00CPU 8k steps 1024 points Q01CPU 14k steps 1024 points ●High performance model QCPU Model Program capacity Number of I/O points Q02CPU 28k steps 4096 points Q02HCPU 28k steps 4096 points Q06HCPU 60k

Bently Nevada 330130-080-01-00 3300 XL 8mm Probe Sensor Extension Cable 8.0 meters NEW Description Transducer System The 3300 Proximity Transducer System consists of:
a 3300 XL 8 mm probe or 3300 5 mm probe a 3300 XL extension cable
a 3300 Proximitor Sensor The system provides an output voltage directly proportional to the distancebetween the probe tip and the observed conductive surface. It is capable ofboth static (position) and dynamic (vibration) measurements, and is

Bently Nevada Proximity PROBE 330101-00-08-10-02-00 3300 XL 8MM 3/8-24 UNF thread NEW Ordering Information for Probes 3300 XL 8 mm Proximity Probes: 330101 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor2 330102 3300 XL 8 mm Probe, 3/8-24 UNF thread, with armor2 Part Number-AXX-BXX-CXX-DXX-EXX A:Unthreaded Length Option Note:Unthreaded length must be at least 0.8 inches less than the case length. Order in increments of 0.1 in Length configurations:Maximum unthreaded

NEW Bently Nevada 3300 XL 8MM Proximity PROBE 330101-00-08-05-02-05 Transducer System Description Proximity Probe and Extension Cable The 3300 XL probe and extension cable also reflect improvements over previous designs. A patented TipLoc* molding method provides a more robust bond between the probe tip and the probe body. The probe’s cable incorporates a patented CableLoc* design that provides 330 N (75 lbf) pull strength to more securely attach the probe cable and probe tip

Bently Nevada 3300 XL 8mm Proximitor Sensor 330180-92-00 330180-92-05 9.0 metres system Description Notes: One-metersystems do not use an extension cable. Proximitor sensors are supplied by default from the factory calibrated to AISI 4140 steel. Calibration to other target materials is available upon request. Consult Bently Nevada* Applications Note, Considerations when using Eddy Current Proximity Probes for Overspeed Protection Applications, when considering this transducer

Bently Nevada 330180-91-05 proximitor sensor 9.0M Compatible with 3300/3300XL Probes NEW Description The GE / Bently Nevada 3300 XL 8mm Proximity Transducer System consists of one 3300 XL 8mm probe, one 3300 XL extension cable, and one 3300 XL Proximitor Sensor. The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The

BENTLY NEVADA 3300 XL 8MM PROXIMITOR SENSOR 330180-91-00 9.0 Metres FACTORY NEW IN PKG. Details of Proximitor Sensor 330180-91-00 This GE / Bently 3300 XL 5/8mm Proximitor Sensor is new from BENTLY NEVADA. Configuration: • Total Length and Mounting Option: 9.0 metres (29.5 feet) system length, DIN mount • Agency Approval Option: Not Required The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor

BENTLY NEVADA PROXIMITY Sensor 330180-51-05 3300XL 5/8mm 5M 24VDC Output 7.87V/mm MODULE For a shorter delivery time, order commonly stocked probes. Currently, stocked probes consist of the following part numbers: 330101-00-08-05-02-00, 330101-00-08-05-02-05, 330101-00-08-10-02-00, 330101-00-08-10-02-05, 330101-00-12-10-02-00, 330101-00-12-10-02-05, 330101-00-16-10-02-00, 330101-00-16-10-02-05, 330101-00-20-05-02-00, 330101-00-20-10-02-00, 330101-00-20-10-02-05, 330101-00-30

Bently Nevada 3300XL Proximitor Sensor 330180-51-00 16.4 feet system length, DIN mount Models of 330180 Series Proximitor Sensor 330180-50-00 330180-50-05 330180-51-00 330180-51-05 330180-52-00 330180-52-05 330180-90-00 330180-90-05 330180-91-00 330180-91-05 330180-92-00 330180-92-05 Description of Proximitor Sensor The 3300 ProximitorSensor offers many improvements over previousBently Nevada eddy current transducers with better linearity and temperaturestability. It also